NVIDIA GeForce 820A vs NVIDIA GeForce RTX 4060 Ti 16 GB Comparison

NVIDIA
GEFORCE

NVIDIA GeForce 820A

CORE STATE GF117
VRAM 1024 MB
CLOCK SPEED —
TDP 15 W
BUS WIDTH 64 bit
ARCHITECTURE Fermi 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2014
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti 16 GB

CORE STATE AD106
VRAM 16 GB
CLOCK SPEED 2535 MHz
TDP 165 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

geekbench_opencl
2,983
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
2,907

Analysis: NVIDIA GeForce 820A vs NVIDIA GeForce RTX 4060 Ti 16 GB

NVIDIA GeForce 820A and NVIDIA GeForce RTX 4060 Ti 16 GB represent two extremes of NVIDIA’s product stack, separated by nearly a decade of architecture evolution and entirely different performance tiers. The 820A is an end-of-life IGP from the GeForce 800A generation, built for low-power portable devices, while the RTX 4060 Ti 16 GB is an end-of-life dual-slot add-in card from the GeForce 40-series. The benchmark data shows a surprising convergence in aggregate scores, but the underlying test methodologies and hardware specifications reveal why these parts are not competitors in any practical sense.

Head-to-Head Benchmarks

The direct comparison is complicated by the fact that the two GPUs were measured with different benchmark suites. The GeForce 820A’s only recorded benchmark is Geekbench OpenCL, where it scores 2983 points. The RTX 4060 Ti 16 GB was tested with 3DMark Steel Nomad DX12, scoring 2907 points. These are not directly comparable metrics, but the percentile ranks place both parts in a similar neighborhood: the 820A sits at the 19th percentile of all GPUs, while the RTX 4060 Ti 16 GB sits at the 18th percentile. That 1-percentage-point gap is negligible in percentile terms, yet it masks a chasm in raw capability.

Looking at each card’s nearest rivals clarifies the picture. The 820A’s closest competitor is the GeForce GTX 860M, which averages 2967 points — a delta of 0.5 percent. The 820A also edges out the GeForce GTX 750 Ti (2953 points, 1 percent delta) and the Quadro P600 (2923 points, 2.1 percent delta). Notably, the 820A’s rival list includes the GeForce RTX 4060 Ti 8 GB at 2913 points, which is 2.4 percent behind the 820A. This is a remarkable result: a 2014 mobile IGP out-scores a 2023 desktop card in this particular OpenCL workload.

The RTX 4060 Ti 16 GB’s rivals tell a different story. Its closest neighbor is the RTX PRO 4000 Blackwell SFF at 2910 points, a 0.1 percent deficit. The RTX 4060 Ti 8 GB matches at 2913 points, 0.2 percent behind. The GeForce RTX 4010 trails by 0.5 percent, and the Quadro P600 leads by 0.5 percent. The RTX 4060 Ti 16 GB’s 3DMark Steel Nomad score of 2907 is essentially identical to its 8 GB sibling’s 2913, indicating that the extra memory does not shift this particular result. The data shows both cards clustered within a 1 percent band of their respective peer groups, but those peer groups are defined by completely different test loads.

Architecture Differences

The architectural gulf between these two GPUs is the primary story. The GeForce 820A uses the GF117 chip, built on Fermi 2.0 architecture, fabricated on TSMC’s 28 nm process. It packs 585 million transistors into a 116 mm² die, yielding a transistor density of 5.0 million per square millimeter. The RTX 4060 Ti 16 GB employs the AD106 chip with Ada Lovelace architecture, manufactured on TSMC’s 5 nm node. This part contains 22,900 million transistors — roughly 39 times as many — spread across a 188 mm² die, achieving a density of 121.8 million per square millimeter. The density difference of 24.4 times reflects the process node advancement from 28 nm to 5 nm.

Compute resources diverge dramatically. The 820A has 96 shading units, 16 texture mapping units, and 8 render output units. The RTX 4060 Ti 16 GB features 4352 shading units, 136 TMUs, and 48 ROPs. That represents 45.3 times more shaders, 8.5 times more TMUs, and 6 times more ROPs. The RTX 4060 Ti 16 GB also adds 34 ray tracing cores and 136 tensor cores, capabilities entirely absent from the Fermi-based 820A. Pixel throughput scales from 2.500 GPixel/s on the 820A to 121.7 GPixel/s on the RTX 4060 Ti 16 GB — a 48.7-fold increase. Texture rate jumps from 10.00 GTexel/s to 344.8 GTexel/s, a 34.5-fold improvement.

FP32 performance tells the most decisive story. The 820A delivers 240.0 GFLOPS, while the RTX 4060 Ti 16 GB delivers 22.06 TFLOPS, which is 22,060 GFLOPS — a 91.9-fold advantage. The RTX 4060 Ti 16 GB also matches FP16 at 22.06 TFLOPS with a 1:1 ratio, a feature the 820A does not list. The API support reflects the generational gap: the 820A supports DirectX 12 (11_0) and OpenGL 4.6 but has no Vulkan entry, while the RTX 4060 Ti 16 GB supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Where Each One Wins

The GeForce 820A wins in the Geekbench OpenCL workload, posting 2983 points versus the RTX 4060 Ti 16 GB’s 2907 points in 3DMark Steel Nomad. This is not a head-to-head victory in a shared test — the FACT PACK lists no common benchmark. Instead, the 820A’s win is relative to its own peer group: it beats the GTX 860M, GTX 750 Ti, Quadro P600, and even the RTX 4060 Ti 8 GB by margins ranging from 0.5 percent to 2.4 percent. For a low-power IGP, this suggests the OpenCL workload favors the 820A’s specific configuration, possibly due to driver optimizations or the simplicity of Fermi’s compute model.

The RTX 4060 Ti 16 GB wins in every architectural category that matters for modern workloads. Its 16 GB of GDDR6 memory with 288.0 GB/s bandwidth is a 18-fold increase over the 820A’s 1 GB DDR3 at 16.02 GB/s. The 128-bit memory bus is double the 820A’s 64-bit bus. The RTX 4060 Ti 16 GB also has 34 ray tracing cores and 136 tensor cores, enabling hardware-accelerated ray tracing and AI workloads that the 820A cannot execute at all. The 1x 16-pin power connector and 165 W TDP, versus the 820A’s 15 W TDP with no power connector, indicate the RTX 4060 Ti 16 GB is designed for sustained high-performance workloads, while the 820A is capped at IGP-level power draw.

The RTX 4060 Ti 16 GB also wins on connectivity and interface. It uses PCIe 4.0 x8, compared to the 820A’s PCIe 2.0 x16, offering much higher bandwidth to the host system. Display outputs are specified as 1x HDMI 2.1 and 3x DisplayPort 1.4a for the RTX 4060 Ti 16 GB, while the 820A lists "Portable Device Dependent" — meaning its outputs vary by the laptop or device it is embedded in. The RTX 4060 Ti 16 GB is a dual-slot card measuring 240 mm in length, 111 mm in height, and 40 mm in width, whereas the 820A is an IGP with no physical dimensions listed, integrated directly onto a motherboard.

Specification Differences

The two GPUs differ on nearly every measurable specification. Process node: 28 nm versus 5 nm. Transistors: 585 million versus 22,900 million. Die size: 116 mm² versus 188 mm². Transistor density: 5.0M / mm² versus 121.8M / mm². Memory size: 1024 MB versus 16 GB. Memory type: DDR3 versus GDDR6. Memory bus: 64 bit versus 128 bit. Memory bandwidth: 16.02 GB/s versus 288.0 GB/s. Shading units: 96 versus 4352. TMUs: 16 versus 136. ROPs: 8 versus 48. RT cores: none versus 34. Tensor cores: none versus 136. Pixel rate: 2.500 GPixel/s versus 121.7 GPixel/s. Texture rate: 10.00 GTexel/s versus 344.8 GTexel/s. FP32: 240.0 GFLOPS versus 22.06 TFLOPS. TDP: 15 W versus 165 W. Slot width: IGP versus Dual-slot. Power connectors: None versus 1x 16-pin. Suggested PSU: not listed versus 450 W. Bus interface: PCIe 2.0 x16 versus PCIe 4.0 x8. DirectX: 12 (11_0) versus 12 Ultimate (12_2). Vulkan: not listed versus 1.4.

The clocks also differ, though the 820A lists no base or boost clock. The 820A’s memory runs at 1001 MHz with 2 Gbps effective, while the RTX 4060 Ti 16 GB’s memory runs at 2250 MHz with 18 Gbps effective. The RTX 4060 Ti 16 GB has a base clock of 2310 MHz and a boost clock of 2535 MHz. Release dates are also far apart: the 820A launched on 2014-03-16, and the RTX 4060 Ti 16 GB launched on 2023-05-17. The 820A’s predecessor is GeForce 700A and successor is GeForce 900A, while the RTX 4060 Ti 16 GB’s predecessor is GeForce 30 and successor is GeForce 50.

FAQ

Q: Which GPU has a higher benchmark score?

A: The GeForce 820A scores 2983 in Geekbench OpenCL, while the GeForce RTX 4060 Ti 16 GB scores 2907 in 3DMark Steel Nomad DX12. These are different tests, so the scores are not directly comparable, but the 820A’s percentile rank is 19 versus the RTX 4060 Ti 16 GB’s 18.

Q: How do the architectures differ?

A: The 820A uses Fermi 2.0 on a 28 nm process with 585 million transistors, while the RTX 4060 Ti 16 GB uses Ada Lovelace on a 5 nm process with 22,900 million transistors. The RTX 4060 Ti 16 GB adds 34 ray tracing cores and 136 tensor cores, which the 820A does not have.

Q: What is the memory configuration difference?

A: The 820A has 1024 MB of DDR3 memory on a 64-bit bus with 16.02 GB/s bandwidth. The RTX 4060 Ti 16 GB has 16 GB of GDDR6 memory on a 128-bit bus with 288.0 GB/s bandwidth.

Q: How does compute performance compare?

A: The 820A delivers 240.0 GFLOPS of FP32 performance. The RTX 4060 Ti 16 GB delivers 22.06 TFLOPS of FP32 and FP16 performance, which is approximately 92 times higher in FP32.

Q: What are the power requirements?

A: The 820A has a 15 W TDP with no power connector. The RTX 4060 Ti 16 GB has a 165 W TDP, requires a 1x 16-pin power connector, and has a suggested PSU of 450 W.

Q: Which API levels are supported?

A: The 820A supports DirectX 12 (11_0) and OpenGL 4.6, with no Vulkan support listed. The RTX 4060 Ti 16 GB supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The Verdict

The data points to a clear split. The GeForce 820A is a legacy IGP designed for low-power portable devices, with a 15 W TDP, no power connector, and portable-dependent display outputs. Its benchmark score of 2983 in Geekbench OpenCL is competitive within its peer group, beating the GTX 860M, GTX 750 Ti, Quadro P600, and RTX 4060 Ti 8 GB by small margins. Users who need a basic display solution for an older laptop or embedded system, with minimal power draw and no external power requirements, would find the 820A sufficient — but only for tasks that align with its 96 shading units and 1 GB of DDR3 memory.

The GeForce RTX 4060 Ti 16 GB is a modern desktop card for demanding workloads. Its 4352 shading units, 34 ray tracing cores, and 136 tensor cores enable ray-traced gaming, AI inference, and content creation that the 820A cannot handle. The 16 GB GDDR6 memory with 288.0 GB/s bandwidth provides ample capacity for large textures and datasets, and the PCIe 4.0 x8 interface ensures fast host communication. The 165 W TDP and 450 W suggested PSU indicate a system requirement that excludes low-power builds. Its 3DMark Steel Nomad score of 2907 places it in the same percentile band as the RTX 4060 Ti 8 GB and RTX PRO 4000 Blackwell SFF, confirming it as a mid-range performer among modern GPUs.

Benchmark results indicate that these two cards should never be cross-shopped. The 820A’s 19th percentile rank in an OpenCL workload does not translate to modern gaming or compute performance; it simply reflects the narrower field of low-end GPUs. The RTX 4060 Ti 16 GB’s 18th percentile rank in a DX12 test is a more meaningful indicator for current software. Anyone selecting between these parts is actually choosing between an integrated, end-of-life mobile chip and a discrete, end-of-life desktop card — the hardware specifications make the RTX 4060 Ti 16 GB the only viable option for serious workloads, while the 820A serves only legacy or ultra-low-power scenarios.

DETAILED SPECIFICATIONS

SPECIFICATION
820A
RTX 4060 Ti 16 GB
Core Specs
Shading Units
96
4,352 +4433.3%
Shaders
96
4,352 +4433.3%
TMUs
16
136 +750.0%
ROPs
8
48 +500.0%
SM Count
2
34 +1600.0%
Clocks
Base Clock
—
2310 MHz
Boost Clock
—
2535 MHz
GPU Clock
625 MHz
—
Shader Clock
1250 MHz
—
Memory Clock
1001 MHz 2 Gbps effective
2250 MHz 18 Gbps effective
Memory
Memory Size
1024 MB
16 GB
VRAM (MB)
1,024
16,384 +1500.0%
Memory Type
DDR3
GDDR6
Memory Bus
64 bit
128 bit
Bandwidth
16.02 GB/s
288.0 GB/s
Cache
L1 Cache
64 KB (per SM)
128 KB (per SM)
L2 Cache
128 KB
32 MB
Performance
Pixel Rate
2.500 GPixel/s
121.7 GPixel/s
Texture Rate
10.00 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
240.0 GFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
20.00 GFLOPS (1:12)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
—
22.06 TFLOPS (1:1)
AI/RT
RT Cores
—
34
Tensor Cores
—
136
Power
TDP
15 W
165 W
TDP (W)
15
165 +1000.0%
Suggested PSU
—
450 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
Fermi 2.0
Ada Lovelace
GPU Name
GF117
AD106
Generation
GeForce 800A
GeForce 40
Process Size
28 nm
5 nm
Transistors
585 million
22,900 million
Die Size
116 mm²
188 mm²
Foundry
TSMC
TSMC
Density
5.0M / mm²
121.8M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
—
1.4
OpenCL
1.1
3.0
CUDA
2.1
8.9
Shader Model
5.1
6.8
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 2.0 x16
PCIe 4.0 x8
Other
Launch Price
—
499 USD
Production
End-of-life
End-of-life
Predecessor
GeForce 700A
GeForce 30
Successor
GeForce 900A
GeForce 50
View GeForce 820A Details View GeForce RTX 4060 Ti 16 GB Details