NVIDIA CMP 40HX vs NVIDIA Tesla V100 SXM2 16 GB Comparison
NVIDIA CMP 40HX
Tesla V100 SXM2 16 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA CMP 40HX vs NVIDIA Tesla V100 SXM2 16 GB
NVIDIA’s Tesla V100 SXM2 16 GB and CMP 40HX come from different eras and serve different purposes, yet both are end-of-life products that still appear in the used market. The data shows a split decision: the CMP 40HX wins the OpenCL benchmark, while the Tesla V100 dominates Vulkan by an enormous margin. This is not a straightforward “which is faster” comparison; it is a choice between a compute-oriented accelerator with massive memory bandwidth and a mining-derived card with a newer feature set. Below is a breakdown of where each card stands, based strictly on the benchmark results and specifications provided.
Where Each One Wins
The Tesla V100 SXM2 16 GB is the clear winner in Vulkan workloads. Its Geekbench Vulkan score of 141336 crushes the CMP 40HX’s 77879, a delta of 81.5% in favor of the Tesla. This is not a marginal lead; it is a near-doubling of performance. If your application leverages Vulkan for compute or rendering, the Tesla V100 is the only rational choice between these two. The data also shows the Tesla holds a 95th percentile rank among all GPUs, with an average benchmark score of 114395, placing it just 0.4% above the NVIDIA RTX A5500 Mobile and 3.3% above the AMD Radeon PRO W7900.
The CMP 40HX, conversely, takes the OpenCL crown. Its Geekbench OpenCL score of 93395 beats the Tesla’s 87454 by 6.4%. While that is a modest win, it is consistent with the CMP 40HX’s higher base and boost clocks (1470 MHz and 1650 MHz vs. 1312 MHz and 1530 MHz). The CMP 40HX also sits at the 93rd percentile, with an average score of 85637. Its nearest rival, the AMD Radeon PRO W7600, trails by 1.7%, while the NVIDIA Quadro GP100 is 2.1% behind. In raw OpenCL throughput, the mining card outperforms the datacenter flagship from four years earlier.
The practical split is clear: Vulkan favors the Tesla V100 overwhelmingly; OpenCL favors the CMP 40HX slightly. If your software stack is Vulkan-based, the Tesla is non-negotiable. If you are locked into OpenCL, the CMP 40HX is the faster card, though the margin is nowhere near as dramatic.
Architecture Differences
The architectural gap between these two is vast. The Tesla V100 uses the GV100 chip on the Volta architecture, built on a 12 nm process at TSMC. It packs 21,100 million transistors on an 815 mm² die, yielding a transistor density of 25.9M per mm². The CMP 40HX uses the TU106 chip on the Turing architecture, also 12 nm and TSMC, but with only 10,800 million transistors on a 445 mm² die, for a density of 24.3M per mm². The Tesla has roughly double the transistor count and die area, which explains its massive compute resources.
Memory is another fundamental divide. The Tesla V100 features 16 GB of HBM2 on a 4096-bit bus, delivering 897.0 GB/s of bandwidth. The CMP 40HX has 8 GB of GDDR6 on a 256-bit bus, with 448.0 GB/s. That is exactly half the memory capacity and roughly half the bandwidth. For memory-bound workloads, the Tesla’s HBM2 advantage is decisive. The Tesla also has far more execution units: 5120 shading units, 320 TMUs, 128 ROPs, and 640 tensor cores. The CMP 40HX has 2304 shading units, 144 TMUs, 64 ROPs, and 288 tensor cores. The Tesla’s FP32 throughput is 15.67 TFLOPS, more than double the CMP 40HX’s 7.603 TFLOPS. FP16 is similarly lopsided: 31.33 TFLOPS vs. 15.21 TFLOPS.
The CMP 40HX does have one architectural edge: it includes 36 RT cores for ray tracing, which the Tesla lacks entirely. The CMP 40HX also supports DirectX 12 Ultimate (12_2), while the Tesla only reaches DirectX 12 (12_1). Both cards have no display outputs, reinforcing their non-gaming, compute-oriented or mining-oriented purposes. The Tesla is an SXM module with no power connectors, consuming 250 W, while the CMP 40HX is a dual-slot card with a single 8-pin connector, drawing 185 W.
Head-to-Head Benchmarks
The Geekbench results tell a story of two completely different performance profiles. In OpenCL, the CMP 40HX scores 93395 against the Tesla’s 87454, a 6.4% advantage for the CMP. This is surprising given the Tesla’s superior specifications, but it reflects the CMP’s higher clock speeds and the nature of the OpenCL test. The CMP 40HX’s boost clock of 1650 MHz is 120 MHz higher than the Tesla’s 1530 MHz, and its base clock of 1470 MHz is 158 MHz higher. In a workload that does not fully utilize the Tesla’s memory bandwidth or tensor cores, the CMP’s raw clock advantage can carry the day.
The Vulkan benchmark flips the script completely. The Tesla V100 scores 141336, while the CMP 40HX manages only 77879. That is an 81.5% lead for the Tesla, a staggering difference. The Tesla’s HBM2 bandwidth of 897.0 GB/s, combined with its 4096-bit bus, likely allows it to feed its shader units far more effectively in Vulkan’s compute-heavy paths. The CMP 40HX’s GDDR6 memory, while fast at 14 Gbps effective, is constrained by a 256-bit bus and half the bandwidth. In Vulkan, the Tesla’s architectural advantages become fully apparent.
The win count is exactly even at one each, but the magnitude of the Vulkan win makes the Tesla the overall stronger performer. Its average benchmark score of 114395 is 33.5% higher than the CMP 40HX’s 85637. The Tesla also ranks in the 95th percentile versus the CMP’s 93rd, a small but meaningful gap. For any workload where both cards are supported, the Tesla’s sheer compute resources and memory subsystem should deliver better results, even if the OpenCL score suggests otherwise.
FAQ
Q: Which card has better Vulkan performance?
A: The NVIDIA Tesla V100 SXM2 16 GB is vastly superior, scoring 141336 in Geekbench Vulkan versus the CMP 40HX’s 77879, an 81.5% difference.
Q: Is the CMP 40HX faster in any benchmark?
A: Yes, in Geekbench OpenCL, the CMP 40HX scores 93395, beating the Tesla’s 87454 by 6.4%.
Q: How do their memory configurations compare?
A: The Tesla has 16 GB of HBM2 on a 4096-bit bus with 897.0 GB/s bandwidth. The CMP 40HX has 8 GB of GDDR6 on a 256-bit bus with 448.0 GB/s bandwidth.
Q: Does either card support ray tracing?
A: Only the CMP 40HX, which includes 36 RT cores. The Tesla V100 has no RT cores.
Q: What is the DirectX support difference?
A: The CMP 40HX supports DirectX 12 Ultimate (12_2), while the Tesla V100 is limited to DirectX 12 (12_1).
Q: Which card has a higher average benchmark score?
A: The Tesla V100, with an average score of 114395 versus the CMP 40HX’s 85637. The Tesla also ranks at the 95th percentile versus the CMP’s 93rd.
Specification Differences
| Specification | Tesla V100 SXM2 16 GB | CMP 40HX |
|----------------|------------------------|----------|
| Architecture | Volta | Turing |
| Chip | GV100 | TU106 |
| Process Node | 12 nm | 12 nm |
| Transistors | 21,100 million | 10,800 million |
| Die Size | 815 mm² | 445 mm² |
| Base Clock | 1312 MHz | 1470 MHz |
| Boost Clock | 1530 MHz | 1650 MHz |
| Memory Size | 16 GB | 8 GB |
| Memory Type | HBM2 | GDDR6 |
| Memory Bus | 4096 bit | 256 bit |
| Memory Bandwidth | 897.0 GB/s | 448.0 GB/s |
| Shading Units | 5120 | 2304 |
| TMUs | 320 | 144 |
| ROPs | 128 | 64 |
| RT Cores | 0 | 36 |
| Tensor Cores | 640 | 288 |
| FP32 | 15.67 TFLOPS | 7.603 TFLOPS |
| FP16 | 31.33 TFLOPS | 15.21 TFLOPS |
| TDP | 250 W | 185 W |
| Slot Width | SXM Module | Dual-slot |
| Power Connectors | None | 1x 8-pin |
| Suggested PSU | 600 W | 450 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 1.0 x4 |
| DirectX | 12 (12_1) | 12 Ultimate (12_2) |
| Release Date | 2017-06-20 | 2021-02-24 |
The Verdict
The data makes the choice conditional on your workload. If you need Vulkan performance, the Tesla V100 SXM2 16 GB is the only option. Its 81.5% lead in the Vulkan benchmark is insurmountable, and its 95th percentile ranking among all GPUs confirms its high-end status. The Tesla’s 16 GB of HBM2 with 897.0 GB/s bandwidth is a generational advantage that the CMP 40HX cannot match, and its 15.67 TFLOPS of FP32 throughput is more than double the CMP’s 7.603 TFLOPS. For compute-heavy tasks that utilize Vulkan, the Tesla is the superior accelerator.
If your software is strictly OpenCL-based, the CMP 40HX is faster, but only by 6.4%. That margin is real but modest, and it comes with significant compromises: half the memory, half the bandwidth, and a PCIe 1.0 x4 interface that will bottleneck data transfers. The CMP 40HX does offer ray tracing cores and DirectX 12 Ultimate support, making it more feature-complete for modern graphics APIs, but its mining origins and 8 GB GDDR6 configuration limit its utility in professional compute.
For most users, the Tesla V100 is the better buy, provided your software supports Vulkan. Its average benchmark score of 114395 is 33.5% higher than the CMP’s 85637, and its memory subsystem is in a different class. The CMP 40HX is a niche choice for OpenCL-only workflows where its higher clocks and newer architecture give it an edge. Neither card has display outputs, so both are strictly for compute or mining. Choose the Tesla for raw performance and memory capacity; choose the CMP 40HX only if OpenCL is your sole API and you need ray tracing or DirectX 12 Ultimate. The launch MSRP of the CMP 40HX was 699 USD, but that is historical context, not a current recommendation.