NVIDIA A100 PCIe 40 GB vs NVIDIA GeForce RTX 4090 D Comparison

NVIDIA
GEFORCE

NVIDIA A100 PCIe 40 GB

CORE STATE GA100
VRAM 40 GB
CLOCK SPEED 1410 MHz
TDP 250 W
BUS WIDTH 5120 bit
ARCHITECTURE Ampere
nm
PROCESS 7 nm
LAUNCH DATE 2020
VS
NVIDIA
GEFORCE

GeForce RTX 4090 D

CORE STATE AD102
VRAM 24 GB
CLOCK SPEED 2520 MHz
TDP 425 W
BUS WIDTH 384 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

geekbench_opencl
178,627
278,621
geekbench_vulkan
146,380
246,941
3dmark_3dmark_steel_nomad_dx12
N/A
8,587

Analysis: NVIDIA A100 PCIe 40 GB vs NVIDIA GeForce RTX 4090 D

The NVIDIA GeForce RTX 4090 D and NVIDIA A100 PCIe 40 GB represent two distinct philosophies in GPU design: one optimized for client-side rendering throughput, the other for server-side compute density. The benchmark data shows a clear performance hierarchy, with the RTX 4090 D leading in every shared test, but the A100’s unique memory architecture and compute focus reveal a more nuanced story.

Head-to-Head Benchmarks

The head-to-head results are decisive in favor of the GeForce RTX 4090 D, but the magnitude of the wins varies significantly by workload. In the Geekbench OpenCL test, the RTX 4090 D scores 278,621 points against the A100’s 178,627 points, a 56% advantage. This is a substantial lead, indicating that the RTX 4090 D’s raw compute throughput, as measured by OpenCL, is far superior in this synthetic scenario. The gap becomes even more pronounced in the Geekbench Vulkan test, where the RTX 4090 D scores 246,941 versus the A100’s 146,380, a 68.7% delta. This suggests the RTX 4090 D’s architecture is particularly well-suited to the Vulkan API, which is commonly used in gaming and real-time graphics workloads.

However, the A100’s absence from the Vulkan test is telling. The A100 has no display outputs and its API support for DirectX, OpenGL, and Vulkan is listed as null in the data. This means the Vulkan test is not merely a case of the A100 underperforming; it is a workload the A100 is not designed to run at all. The RTX 4090 D, with its DirectX 12 Ultimate support and Vulkan 1.4 compatibility, is built for interactive graphics. The A100, conversely, is a compute accelerator where such graphics APIs are irrelevant. Therefore, the 68.7% win in Vulkan is less about raw speed and more about architectural purpose.

Looking at the broader benchmark picture, the RTX 4090 D also holds a significant lead in average benchmark score, posting 178,050 against the A100’s 162,504. This 9.5% gap in average performance is smaller than the head-to-head deltas, suggesting that the A100 performs relatively better in workloads not covered by the direct comparison, likely due to its high-bandwidth memory and tensor core design. The RTX 4090 D’s nearest rivals include the RTX PRO 5000 Blackwell (deltaPct -2.2), the A100 SXM4 80 GB (deltaPct -3.1), and the RTX 5000 Ada Generation (deltaPct -3.6). The A100 PCIe 40 GB’s nearest rivals are the AMD Radeon Pro W6800X (deltaPct 1.1), AMD Radeon PRO W7800 (deltaPct -1.4), and NVIDIA RTX A5500 (deltaPct -1.6). This places the RTX 4090 D in a higher performance tier, with its closest competitors being newer or higher-spec server parts, while the A100 is bracketed by mid-range workstation cards.

Where Each One Wins

The data suggests a clear split in use cases. The GeForce RTX 4090 D wins all head-to-head benchmarks, making it the obvious choice for any workload that relies on the Geekbench OpenCL or Vulkan APIs. Its 56% and 68.7% leads are not marginal; they represent a generational leap in client-side compute and rendering capability. The RTX 4090 D is also the only one of the two with display outputs (1x HDMI 2.1 and 3x DisplayPort 1.4a), making it suitable for direct visual output, gaming, and real-time 3D rendering. Its shading unit count of 14,592 versus the A100’s 6,912 is a massive factor in its favor for parallel processing tasks that are not memory-bandwidth limited.

The A100 PCIe 40 GB, despite losing all direct comparisons, has its own domain where it excels. Its memory configuration is the key differentiator: 40 GB of HBM2e on a 5120-bit bus, delivering 1.56 TB/s of bandwidth. The RTX 4090 D has 24 GB of GDDR6X on a 384-bit bus, yielding 1.01 TB/s. This 54.5% advantage in memory bandwidth for the A100 is critical for large datasets that do not fit in the RTX 4090 D’s smaller frame buffer. Furthermore, the A100’s FP16 performance is listed as 77.97 TFLOPS (4:1 ratio), which is higher than the RTX 4090 D’s FP16 of 73.54 TFLOPS (1:1 ratio). This suggests that for mixed-precision AI training or inference workloads, the A100 can match or exceed the RTX 4090 D, despite its lower FP32 throughput. The A100’s architecture, with 432 tensor cores, is specifically tailored for matrix math, whereas the RTX 4090 D’s 456 tensor cores are more general-purpose.

The A100 also wins on power efficiency in terms of raw compute per watt. The A100 has a TDP of 250 W, while the RTX 4090 D draws 425 W. The A100’s FP32 performance is 19.49 TFLOPS, meaning it achieves roughly 0.078 TFLOPS/W, while the RTX 4090 D achieves 0.173 TFLOPS/W. This is a clear win for the RTX 4090 D on FP32 efficiency, but for FP16, the A100’s 77.97 TFLOPS at 250 W gives 0.312 TFLOPS/W versus the RTX 4090 D’s 0.173 TFLOPS/W. The A100 is thus significantly more efficient in FP16 compute, making it a better fit for large-scale AI deployments where power density is a concern.

Architecture Differences

The architectural divide between these two GPUs is fundamental. The RTX 4090 D is built on the AD102 chip using the Ada Lovelace architecture, fabricated on a 5 nm process at TSMC. It packs 76,300 million transistors on a 609 mm² die, yielding a transistor density of 125.3 million per mm². The A100 uses the GA100 chip with the Ampere architecture, also from TSMC but on a 7 nm process. It contains 54,200 million transistors on a larger 826 mm² die, resulting in a lower density of 65.6 million per mm². The newer process node and higher density of the RTX 4090 D allow for more transistors in a smaller area, contributing to its higher clock speeds and raw performance.

Clock speeds are drastically different. The RTX 4090 D has a base clock of 2280 MHz and a boost clock of 2520 MHz, while the A100 operates at a modest 765 MHz base and 1410 MHz boost. This nearly 80% higher boost clock on the RTX 4090 D is a primary reason for its dominance in FP32 and graphics workloads. However, the A100 compensates with its wider memory bus and higher bandwidth, as well as its specialized tensor core design.

The RTX 4090 D features 114 RT cores, while the A100 has none listed. This is a definitive feature split: the RTX 4090 D is capable of hardware-accelerated ray tracing, while the A100 is not. The API support also differs, with the RTX 4090 D supporting DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the A100 has null entries for all three. The A100 is a compute-only device, evidenced by its lack of display outputs, whereas the RTX 4090 D is a full-featured graphics card. Finally, the RTX 4090 D is a triple-slot card with a 1x 16-pin power connector and an 800 W suggested PSU, while the A100 is a dual-slot card with an 8-pin EPS connector and a 600 W suggested PSU, reflecting its lower power draw.

Specification Differences

The core specification differences highlight their divergent purposes. The RTX 4090 D has 14,592 shading units, 456 TMUs, and 176 ROPs, while the A100 has 6,912 shading units, 432 TMUs, and 160 ROPs. This gives the RTX 4090 D a 2.1x advantage in shading units, which directly translates to its higher pixel rate of 443.5 GPixel/s versus 225.6 GPixel/s, and texture rate of 1,149.1 GTexel/s versus 609.1 GTexel/s. The FP32 compute is also a major differentiator: 73.54 TFLOPS for the RTX 4090 D versus 19.49 TFLOPS for the A100, a 3.8x difference.

Memory is where the A100 fights back. The A100 has 40 GB of HBM2e versus 24 GB of GDDR6X, and a bus width of 5120 bits versus 384 bits. This results in 1.56 TB/s bandwidth versus 1.01 TB/s, as noted. The memory clock is listed as 1215 MHz (2.4 Gbps effective) for the A100 and 1313 MHz (21 Gbps effective) for the RTX 4090 D, but the effective data rate is far higher on the RTX 4090 D due to the GDDR6X signaling. The transistor count differs (76,300M vs 54,200M), as does the die size (609 mm² vs 826 mm²). The process node is 5 nm versus 7 nm, and the TDP is 425 W versus 250 W. The RTX 4090 D has a launch MSRP of 1,599 USD, while the A100 has no launch MSRP listed. Physical dimensions also differ: the RTX 4090 D is 304 mm long, 137 mm high, and 61 mm wide, while the A100 is 267 mm long and 111 mm high with no width listed.

FAQ

Q: Which GPU is faster in the Geekbench OpenCL test?

A: The NVIDIA GeForce RTX 4090 D is faster, scoring 278,621 points compared to the A100’s 178,627 points, a 56% advantage.

Q: Does the A100 PCIe 40 GB support Vulkan?

A: No, the data shows the A100 has a null entry for Vulkan API support, and it has no display outputs, indicating it is not designed for graphics APIs.

Q: What is the memory bandwidth difference between the two?

A: The A100 has 1.56 TB/s of bandwidth from its 5120-bit HBM2e interface, while the RTX 4090 D has 1.01 TB/s from its 384-bit GDDR6X interface.

Q: Which card has a higher boost clock?

A: The RTX 4090 D has a boost clock of 2520 MHz, while the A100 has a boost clock of 1410 MHz.

Q: Are there any benchmarks where the A100 wins?

A: In the head-to-head benchmarks provided, the A100 wins zero tests. However, its FP16 performance of 77.97 TFLOPS is higher than the RTX 4090 D’s 73.54 TFLOPS, suggesting potential wins in specific FP16 workloads.

Q: What is the TDP of each card?

A: The RTX 4090 D has a TDP of 425 W, while the A100 has a TDP of 250 W.

The Verdict

The data is unambiguous for most users: the GeForce RTX 4090 D is the superior performer in every direct benchmark, with a 56% lead in OpenCL and a 68.7% lead in Vulkan. It is the only card of the two with display outputs, making it the sole choice for any workstation requiring a visual interface or real-time rendering. Its higher shading unit count, clock speeds, and FP32 throughput make it a dominant force for general-purpose compute and graphics workloads. The RTX 4090 D’s 98th percentile ranking versus the A100’s 97th percentile confirms its higher standing in the overall GPU hierarchy.

However, the A100 PCIe 40 GB is not without merit for a specific audience. Its 40 GB of HBM2e memory with 1.56 TB/s bandwidth is a decisive advantage for datasets exceeding 24 GB, and its higher FP16 compute (77.97 TFLOPS) at a lower 250 W TDP makes it a more power-efficient option for AI inference and training tasks that rely on FP16 precision. For server environments where power is limited and memory capacity is paramount, the A100’s architecture is purpose-built. The verdict is that the RTX 4090 D is the pick for client-side work, gaming, and graphics-heavy compute, while the A100 is the pick for large-scale, memory-bound, FP16-centric server deployments. The choice hinges entirely on whether your priority is raw graphics and FP32 throughput or memory capacity and FP16 efficiency.

DETAILED SPECIFICATIONS

SPECIFICATION
A100 PCIe 40 GB
RTX 4090 D
Core Specs
Shading Units
6,912
14,592 +111.1%
Shaders
6,912
14,592 +111.1%
TMUs
432
456 +5.6%
ROPs
160
176 +10.0%
SM Count
108
114 +5.6%
Clocks
Base Clock
765 MHz
2280 MHz
Boost Clock
1410 MHz
2520 MHz
Memory Clock
1215 MHz 2.4 Gbps effective
1313 MHz 21 Gbps effective
Memory
Memory Size
40 GB
24 GB
VRAM (MB)
40,960
24,576 -40.0%
Memory Type
HBM2e
GDDR6X
Memory Bus
5120 bit
384 bit
Bandwidth
1.56 TB/s
1.01 TB/s
Cache
L1 Cache
192 KB (per SM)
128 KB (per SM)
L2 Cache
40 MB
72 MB
Performance
Pixel Rate
225.6 GPixel/s
443.5 GPixel/s
Texture Rate
609.1 GTexel/s
1,149.1 GTexel/s
FP32 (TFLOPS)
19.49 TFLOPS
73.54 TFLOPS
FP64 (TFLOPS)
9.746 TFLOPS (1:2)
1,149.1 GFLOPS (1:64)
FP16 (TFLOPS)
77.97 TFLOPS (4:1)
73.54 TFLOPS (1:1)
AI/RT
RT Cores
—
114
Tensor Cores
432
456 +5.6%
BF16
311.84 TFLOPS (16:1)
—
TF32
155.92 TFLOPs (8:1)
—
Power
TDP
250 W
425 W
TDP (W)
250
425 +70.0%
Suggested PSU
600 W
800 W
Power Connectors
8-pin EPS
1x 16-pin
Architecture
Architecture
Ampere
Ada Lovelace
GPU Name
GA100
AD102
Generation
Server Ampere (Axx)
GeForce 40
Process Size
7 nm
5 nm
Transistors
54,200 million
76,300 million
Die Size
826 mm²
609 mm²
Foundry
TSMC
TSMC
Density
65.6M / mm²
125.3M / mm²
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
8.0
8.9
Shader Model
—
6.8
Physical
Slot Width
Dual-slot
Triple-slot
Length
267 mm 10.5 inches
304 mm 12 inches
Height
111 mm 4.4 inches
137 mm 5.4 inches
Outputs
No outputs
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x16
PCIe 4.0 x16
Other
Launch Price
—
1,599 USD
Production
End-of-life
End-of-life
Predecessor
Tesla Turing
GeForce 30
Successor
Server Ada
GeForce 50
View A100 PCIe 40 GB Details View GeForce RTX 4090 D Details