NVIDIA A100 PCIe 40 GB vs NVIDIA A100 SXM4 80 GB Comparison

NVIDIA
GEFORCE

NVIDIA A100 PCIe 40 GB

CORE STATE GA100
VRAM 40 GB
CLOCK SPEED 1410 MHz
TDP 250 W
BUS WIDTH 5120 bit
ARCHITECTURE Ampere
nm
PROCESS 7 nm
LAUNCH DATE 2020
VS
NVIDIA
GEFORCE

A100 SXM4 80 GB

CORE STATE GA100
VRAM 80 GB
CLOCK SPEED 1410 MHz
TDP 400 W
BUS WIDTH 5120 bit
ARCHITECTURE Ampere
nm
PROCESS 7 nm
LAUNCH DATE 2020

PERFORMANCE BENCHMARKS

geekbench_opencl
178,627
N/A
geekbench_vulkan
146,380
183,725

Analysis: NVIDIA A100 PCIe 40 GB vs NVIDIA A100 SXM4 80 GB

The NVIDIA A100 SXM4 80 GB and the NVIDIA A100 PCIe 40 GB share the same GA100 chip and Ampere architecture, but they are configured for different deployment scenarios. The SXM4 variant is an OAM module designed for high-density servers, while the PCIe variant is a dual-slot card for standard server chassis. Benchmark data shows a clear performance gap, but the differences go beyond raw compute speed into memory capacity, power delivery, and physical integration.

Head-to-Head Benchmarks

The only directly comparable benchmark in the data is the Geekbench Vulkan test, and the results show a decisive victory for the SXM4 80 GB model. It scores 183,725 points, while the PCIe 40 GB model scores 146,380 points. This represents a 25.5% delta in favor of the SXM4 card. The scale of this difference is substantial — it is not a marginal lead but a significant margin that will translate into faster execution of GPU-accelerated workloads that rely on the Vulkan API.

Context from the nearest rivals reinforces the SXM4 80 GB's standing. Its average benchmark score of 183,725 places it at the 98th percentile of all GPUs. It sits just 0.5% behind the NVIDIA RTX 5000 Ada Generation (184,664) and 0.9% ahead of the NVIDIA RTX PRO 5000 Blackwell (182,109). The SXM4 80 GB also leads the NVIDIA GeForce RTX 4090 D (178,050) by 3.2%. The PCIe 40 GB model, by contrast, has an average benchmark score of 162,504, which puts it at the 97th percentile. Its nearest rivals are the AMD Radeon Pro W6800X (160,671, 1.1% behind), the AMD Radeon PRO W7800 (164,894, 1.4% ahead), the NVIDIA RTX A5500 (165,217, 1.6% ahead), and the NVIDIA RTX 4500 Ada Generation (166,094, 2.2% ahead). The PCIe card is competitive within its immediate peer group, but the SXM4 80 GB is in a different performance tier, as evidenced by the 25.5% head-to-head delta.

The PCIe 40 GB model also has a Geekbench OpenCL score of 178,627, which is notably higher than its Vulkan result. This suggests that its performance varies depending on the compute API used, and in OpenCL workloads it is much closer to the SXM4 80 GB's Vulkan score. However, without a direct OpenCL comparison between the two A100 variants, the Vulkan result remains the primary point of reference for this head-to-head.

Architecture Differences

Both GPUs are built on the GA100 chip using a 7 nm process at TSMC, with 54,200 million transistors on an 826 mm² die. The transistor density is identical at 65.6 million transistors per square millimeter. Both use the Ampere architecture and belong to the Server Ampere generation. The compute core counts are the same: 6,912 shading units, 432 texture mapping units, 160 ROPs, and 432 tensor cores. The pixel rate is 225.6 GPixel/s and the texture rate is 609.1 GTexel/s for both. FP32 performance is 19.49 TFLOPS and FP16 performance is 77.97 TFLOPS with a 4:1 ratio.

The key architectural differences lie in clock speeds, memory configuration, power, and physical format. The SXM4 80 GB has a base clock of 1275 MHz and a boost clock of 1410 MHz. The PCIe 40 GB has a much lower base clock of 765 MHz but the same 1410 MHz boost clock. Memory clocks also differ: the SXM4 runs at 1593 MHz with 3.2 Gbps effective speed, while the PCIe runs at 1215 MHz with 2.4 Gbps effective speed. Both use HBM2e memory with a 5120-bit bus, but the SXM4 has 80 GB of capacity and 2.04 TB/s of bandwidth, whereas the PCIe has 40 GB and 1.56 TB/s.

The power envelope is a major separator. The SXM4 has a TDP of 400 W and requires a suggested 800 W power supply, with no power connectors because it is an OAM module. The PCIe card has a TDP of 250 W, a suggested 600 W power supply, and uses an 8-pin EPS connector. The physical dimensions reflect their intended mounting: the SXM4 is an OAM module, while the PCIe card is dual-slot with a length of 267 mm (10.5 inches) and a height of 111 mm (4.4 inches). Neither card has display outputs.

FAQ

Q: Which card has higher memory bandwidth?

A: The NVIDIA A100 SXM4 80 GB has a bandwidth of 2.04 TB/s, while the NVIDIA A100 PCIe 40 GB has 1.56 TB/s. The SXM4 also runs its memory at a higher effective speed of 3.2 Gbps versus 2.4 Gbps for the PCIe card.

Q: Do the two cards have the same compute core configuration?

A: Yes, both have 6,912 shading units, 432 TMUs, 160 ROPs, and 432 tensor cores. Their FP32 performance is identical at 19.49 TFLOPS, and their FP16 performance is identical at 77.97 TFLOPS (4:1). The difference in real-world performance comes from clock speeds and memory.

Q: Why does the SXM4 80 GB score so much higher in the benchmark?

A: The SXM4 80 GB has a base clock of 1275 MHz compared to 765 MHz for the PCIe 40 GB, and its memory runs at 1593 MHz versus 1215 MHz. These higher clocks, combined with double the memory capacity and higher bandwidth, contribute to its 25.5% lead in the Geekbench Vulkan test.

Q: What are the power supply requirements for each card?

A: The SXM4 80 GB has a TDP of 400 W and a suggested power supply of 800 W. It uses no power connectors because it is an OAM module. The PCIe 40 GB has a TDP of 250 W, a suggested power supply of 600 W, and uses an 8-pin EPS connector.

Q: Is the PCIe 40 GB card slower in every benchmark?

A: The data includes a Geekbench OpenCL score for the PCIe 40 GB of 178,627, which is higher than its Vulkan score of 146,380. This indicates that its performance is API-dependent. However, in the only direct head-to-head comparison available (Vulkan), the SXM4 80 GB wins by 25.5%.

Q: What is the physical form factor of each card?

A: The SXM4 80 GB is an OAM Module, which is a board-level form factor for dense server integration. The PCIe 40 GB is a dual-slot card with a length of 267 mm (10.5 inches) and a height of 111 mm (4.4 inches), designed for standard PCIe slots.

Specification Differences

The two cards differ in several specification fields. The base clock is 1275 MHz for the SXM4 80 GB and 765 MHz for the PCIe 40 GB. The memory clock is 1593 MHz with 3.2 Gbps effective for the SXM4, versus 1215 MHz with 2.4 Gbps effective for the PCIe. Memory size is 80 GB versus 40 GB, and memory bandwidth is 2.04 TB/s versus 1.56 TB/s. The TDP is 400 W for the SXM4 and 250 W for the PCIe. The slot width is OAM Module for the SXM4 and Dual-slot for the PCIe. The power connector is "None" for the SXM4 and "8-pin EPS" for the PCIe. The suggested PSU is 800 W for the SXM4 and 600 W for the PCIe. The PCIe card has specified dimensions (267 mm length, 111 mm height), while the SXM4 does not list dimensions in the data. The release date is also different: the SXM4 80 GB was released on 2020-11-15, while the PCIe 40 GB was released on 2020-06-21. Both share the same process node, transistor count, die size, transistor density, shading units, TMUs, ROPs, tensor cores, pixel rate, texture rate, FP32 and FP16 performance, bus interface (PCIe 4.0 x16), and lack of display outputs.

Where Each One Wins

The NVIDIA A100 SXM4 80 GB wins in every category where the two can be directly compared. It has a 25.5% higher Vulkan benchmark score, double the memory capacity (80 GB vs 40 GB), 30.8% higher memory bandwidth (2.04 TB/s vs 1.56 TB/s), and a 66.7% higher base clock (1275 MHz vs 765 MHz). It also has a higher memory clock and effective speed. For workloads that are memory-bound — such as large language model training, massive matrix operations, or high-resolution scientific simulations — the SXM4 80 GB has a clear advantage due to its larger memory pool and faster memory subsystem. Its higher base clock also means it will sustain higher performance in sustained compute tasks that do not rely solely on boost behavior.

The NVIDIA A100 PCIe 40 GB wins on power efficiency and integration flexibility. It has a TDP of 250 W versus 400 W, meaning it draws less power under load. Its suggested power supply is 600 W versus 800 W, which makes it easier to fit into existing server infrastructure. It also uses a standard 8-pin EPS connector and a dual-slot PCIe form factor, allowing it to be installed in conventional server chassis without requiring OAM-specific motherboard designs. Its lower base clock may reduce idle or low-load power draw. The PCIe 40 GB also has a higher OpenCL score (178,627) than its Vulkan score, suggesting it may be better suited to OpenCL-based compute frameworks where its relative performance is stronger. Its release date of 2020-06-21 is earlier, meaning it has a longer deployment history in the field.

The Verdict

Based strictly on the data, the NVIDIA A100 SXM4 80 GB is the superior performer. It wins the only head-to-head benchmark by 25.5%, has double the memory capacity, 30.8% more bandwidth, and a significantly higher base clock. It sits at the 98th percentile of all GPUs, with its average score of 183,725 placing it within 0.5% of the RTX 5000 Ada Generation and ahead of the RTX PRO 5000 Blackwell. If your priority is raw compute throughput and the ability to hold larger datasets in GPU memory, the SXM4 80 GB is the clear choice.

The NVIDIA A100 PCIe 40 GB is not without merit, but its advantages are operational rather than performance-based. It draws 150 W less power, needs a 600 W PSU instead of 800 W, and uses a standard dual-slot PCIe form factor with an 8-pin EPS connector. It is also at the 97th percentile, so it is still a very capable card, but its average score of 162,504 places it closer to the AMD Radeon PRO W7800 and RTX A5500 than to its SXM4 sibling. In the Vulkan head-to-head, it loses decisively.

The choice depends on your server environment. If you have OAM-compatible infrastructure and can supply 400 W to each module, the SXM4 80 GB will deliver meaningfully more performance per card. If you are constrained to standard PCIe slots and lower power budgets, the PCIe 40 GB is the practical option, though you will accept a 25.5% performance deficit in Vulkan workloads. The data does not show a scenario where the PCIe card outperforms the SXM4 in a direct comparison.

DETAILED SPECIFICATIONS

SPECIFICATION
A100 PCIe 40 GB
A100 SXM4 80 GB
Core Specs
Shading Units
6,912
6,912 0.0%
Shaders
6,912
6,912 0.0%
TMUs
432
432 0.0%
ROPs
160
160 0.0%
SM Count
108
108 0.0%
Clocks
Base Clock
765 MHz
1275 MHz
Boost Clock
1410 MHz
1410 MHz
Memory Clock
1215 MHz 2.4 Gbps effective
1593 MHz 3.2 Gbps effective
Memory
Memory Size
40 GB
80 GB
VRAM (MB)
40,960
81,920 +100.0%
Memory Type
HBM2e
HBM2e
Memory Bus
5120 bit
5120 bit
Bandwidth
1.56 TB/s
2.04 TB/s
Cache
L1 Cache
192 KB (per SM)
192 KB (per SM)
L2 Cache
40 MB
40 MB
Performance
Pixel Rate
225.6 GPixel/s
225.6 GPixel/s
Texture Rate
609.1 GTexel/s
609.1 GTexel/s
FP32 (TFLOPS)
19.49 TFLOPS
19.49 TFLOPS
FP64 (TFLOPS)
9.746 TFLOPS (1:2)
9.746 TFLOPS (1:2)
FP16 (TFLOPS)
77.97 TFLOPS (4:1)
77.97 TFLOPS (4:1)
AI/RT
Tensor Cores
432
432 0.0%
BF16
311.84 TFLOPS (16:1)
311.84 TFLOPS (16:1)
TF32
155.92 TFLOPs (8:1)
155.92 TFLOPs (8:1)
Power
TDP
250 W
400 W
TDP (W)
250
400 +60.0%
Suggested PSU
600 W
800 W
Power Connectors
8-pin EPS
None
Architecture
Architecture
Ampere
Ampere
GPU Name
GA100
GA100
Generation
Server Ampere (Axx)
Server Ampere (Axx)
Process Size
7 nm
7 nm
Transistors
54,200 million
54,200 million
Die Size
826 mm²
826 mm²
Foundry
TSMC
TSMC
Density
65.6M / mm²
65.6M / mm²
API Support
OpenCL
3.0
3.0
CUDA
8.0
8.0
Physical
Slot Width
Dual-slot
OAM Module
Length
267 mm 10.5 inches
—
Height
111 mm 4.4 inches
—
Outputs
No outputs
No outputs
Bus Interface
PCIe 4.0 x16
PCIe 4.0 x16
Other
Production
End-of-life
End-of-life
Predecessor
Tesla Turing
Tesla Turing
Successor
Server Ada
Server Ada
View A100 PCIe 40 GB Details View A100 SXM4 80 GB Details