NVIDIA A100 PCIe 40 GB vs NVIDIA A100 PCIe 80 GB Comparison
NVIDIA A100 PCIe 40 GB
A100 PCIe 80 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA A100 PCIe 40 GB vs NVIDIA A100 PCIe 80 GB
The NVIDIA A100 PCIe 80 GB and the NVIDIA A100 PCIe 40 GB share the same GA100 chip, Ampere architecture, and compute core counts, but the data reveals that the 80 GB model holds a decisive performance lead in the available benchmark results. The primary differentiator is not the silicon itself, but the memory subsystem and clock behavior, which translate into measurable gains in synthetic compute workloads. This analysis draws exclusively on the provided benchmark data and specifications to detail where these two server accelerators diverge.
Head-to-Head Benchmarks
The only direct benchmark comparison available in the data is the Geekbench OpenCL test, and the result is unambiguous. The NVIDIA A100 PCIe 80 GB scores 207124, while the NVIDIA A100 PCIe 40 GB scores 178627. This represents a 16% delta in favor of the 80 GB variant. The 80 GB model is the clear winner in this head-to-head matchup, and the margin is substantial enough to be significant in a server environment where every percentage point of compute throughput matters.
Contextualizing this score against the broader field reinforces the 80 GB model’s standing. The A100 PCIe 80 GB sits in the 99th percentile of all GPUs, while the 40 GB model sits in the 97th percentile. The 80 GB card’s average benchmark score of 207124 places it 5.7% ahead of the NVIDIA RTX 6000D (195964) and 6.5% ahead of the NVIDIA Tesla V100S PCIe 32 GB (194415). However, it trails the AMD Radeon PRO W7900D by 5.8% (219827) and the NVIDIA PG506-232 by 8% (225124). The 40 GB model, with an average score of 162504, is only 1.1% ahead of the AMD Radeon Pro W6800X (160671) and sits slightly behind the AMD Radeon PRO W7800 (-1.4%), the NVIDIA RTX A5500 (-1.6%), and the NVIDIA RTX 4500 Ada Generation (-2.2%). The 80 GB model is not just faster than the 40 GB model; it competes in a higher performance tier altogether.
It is notably the 40 GB model has an additional Geekbench Vulkan score of 146380, which is lower than its OpenCL score of 178627. No Vulkan score is listed for the 80 GB model, so a direct comparison in that API is not possible from the data. Still, the OpenCL result alone establishes a clear hierarchy: the 80 GB variant delivers 16% more raw compute throughput in this specific test, a gap that aligns with its higher memory bandwidth and base clock.
Where Each One Wins
The 80 GB model wins outright in the only head-to-head benchmark recorded, giving it a 1-0 advantage in wins. Its superiority stems from a combination of factors visible in the specification data. The 80 GB card operates with a base clock of 1065 MHz compared to 765 MHz on the 40 GB card, which directly contributes to higher throughput in compute-bound tasks. Additionally, its memory runs at 1512 MHz (3 Gbps effective) versus 1215 MHz (2.4 Gbps effective) on the 40 GB model, yielding a memory bandwidth of 1.94 TB/s versus 1.56 TB/s. This 24% bandwidth advantage is likely a major driver of the 16% OpenCL performance delta, especially in workloads that saturate memory access.
The 40 GB model, by contrast, has no benchmark wins in the data. Its strengths lie elsewhere, namely in its lower power envelope. The 40 GB card draws 250 W TDP compared to 300 W on the 80 GB card, and its suggested PSU is 600 W versus 700 W. For deployments where power density is a constraint, the 40 GB model offers a meaningful reduction in system-level requirements. However, in pure performance terms, the data shows no scenario where the 40 GB model outperforms the 80 GB model. The 40 GB card also has a lower average benchmark score (162504) than its own OpenCL score (178627), suggesting that the Vulkan result drags down its overall average, but this is a statistical artifact rather than a use-case advantage.
For specific workloads, the 80 GB model is the choice for memory-hungry applications like large language model inference or high-resolution scientific simulations, where the extra 40 GB of HBM2e capacity and higher bandwidth are directly beneficial. The 40 GB model, while slower, remains a capable accelerator for tasks where the 250 W power draw is a hard limit, though the data does not quantify any performance-per-watt advantage.
Architecture Differences
Both cards are built on the same GA100 chip, fabricated on TSMC’s 7 nm process, with identical transistor counts of 54,200 million and a die size of 826 mm². The transistor density is 65.6M per mm² for both. The core configuration is also identical: 6912 shading units, 432 TMUs, 160 ROPs, and 432 tensor cores. Neither card has dedicated RT cores, and both lack display outputs, consistent with their server positioning. The pixel rate (225.6 GPixel/s), texture rate (609.1 GTexel/s), FP32 throughput (19.49 TFLOPS), and FP16 throughput (77.97 TFLOPS with 4:1 ratio) are exactly the same across both SKUs.
The architectural divergence is confined to clock speeds and memory. The 80 GB model has a base clock of 1065 MHz, which is 300 MHz higher than the 40 GB model’s 765 MHz base. Both share the same boost clock of 1410 MHz, meaning the 80 GB card sustains a higher minimum performance level under load. The memory clock differs as well: 1512 MHz on the 80 GB card versus 1215 MHz on the 40 GB card, translating to 3 Gbps effective versus 2.4 Gbps effective. This is not a fundamental architectural change but a binning and configuration difference. The 80 GB card uses 80 GB of HBM2e across a 5120-bit bus, while the 40 GB card uses 40 GB of the same memory type on the same bus width. The bandwidth difference (1.94 TB/s vs 1.56 TB/s) is a direct result of the higher memory clock, not a wider interface.
The production status is end-of-life for both, and both share the same predecessor (Tesla Turing) and successor (Server Ada). The release date differs: the 40 GB model launched on 2020-06-21, while the 80 GB model followed on 2021-06-27. Neither card has a launch MSRP listed in the data, so no pricing information is available. The core architectural story is one of identical compute hardware with differentiated memory and clock profiles.
Specification Differences
The two cards differ in exactly five specification fields according to the data. First, the base clock: 1065 MHz on the 80 GB model versus 765 MHz on the 40 GB model. Second, the memory clock: 1512 MHz (3 Gbps effective) versus 1215 MHz (2.4 Gbps effective). Third, the memory size: 80 GB versus 40 GB, both HBM2e. Fourth, the memory bandwidth: 1.94 TB/s versus 1.56 TB/s. Fifth, the TDP: 300 W versus 250 W, with a corresponding change in suggested PSU from 700 W to 600 W.
All other specifications are identical. Both use PCIe 4.0 x16, have a dual-slot form factor, use an 8-pin EPS power connector, measure 267 mm in length and 111 mm in height, and have no display outputs. The shading units, TMUs, ROPs, tensor cores, pixel rate, texture rate, FP32, and FP16 figures are the same. The process node, foundry, die size, and transistor count are also identical. The only other difference is the release date, with the 40 GB model arriving one year earlier. The 80 GB model’s higher base clock and memory clock are the sole clock-related differences, and they explain its performance advantage without any change to the underlying compute architecture.
FAQ
Q: How much faster is the NVIDIA A100 PCIe 80 GB than the 40 GB model in Geekbench OpenCL?
A: The 80 GB model scores 207124, while the 40 GB model scores 178627, a delta of 16% in favor of the 80 GB variant.
Q: Do the two cards have the same number of compute cores?
A: Yes, both have 6912 shading units, 432 TMUs, 160 ROPs, and 432 tensor cores. The core configuration is identical.
Q: What is the memory bandwidth difference between the two cards?
A: The 80 GB model has a memory bandwidth of 1.94 TB/s, while the 40 GB model has 1.56 TB/s. The 80 GB card uses HBM2e memory clocked at 1512 MHz (3 Gbps effective), versus 1215 MHz (2.4 Gbps effective) on the 40 GB card.
Q: Which card has a lower power draw?
A: The 40 GB model has a TDP of 250 W, compared to 300 W on the 80 GB model. The suggested PSU is 600 W for the 40 GB card and 700 W for the 80 GB card.
Q: Are the cards based on the same architecture and process?
A: Yes, both are built on the GA100 chip using the Ampere architecture, fabricated on TSMC’s 7 nm process, with a die size of 826 mm² and 54,200 million transistors.
Q: Does the 40 GB model have any benchmark where it wins?
A: No. In the only head-to-head benchmark (Geekbench OpenCL), the 80 GB model wins. The 40 GB model has a separate Geekbench Vulkan score of 146380, but no comparable Vulkan score exists for the 80 GB model in the data.