Intel HD Graphics P4600 vs NVIDIA RTX PRO 4000 Blackwell SFF Comparison
Intel HD Graphics P4600
RTX PRO 4000 Blackwell SFF
PERFORMANCE BENCHMARKS
Analysis: Intel HD Graphics P4600 vs NVIDIA RTX PRO 4000 Blackwell SFF
Intel HD Graphics P4600 and NVIDIA RTX PRO 4000 Blackwell SFF are not comparable in any practical sense, as the data confirms. The P4600 is an end-of-life integrated graphics solution from 2013, while the RTX PRO 4000 is an active, modern workstation GPU. Benchmark results place them in entirely different performance tiers, with the RTX PRO 4000 delivering roughly 7,000% higher FP32 compute and over 50 times the pixel throughput. The Intel part holds a slight edge in its single available benchmark due to different test methodologies, but this does not reflect real-world usability.
Head-to-Head Benchmarks
The two GPUs were not tested in the same benchmark suite, so a direct score comparison is not possible. The Intel HD Graphics P4600 has a Geekbench OpenCL score of 3389, placing it in the 20th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce GT 740 (3431, 1.2% faster), NVIDIA Quadro 2000M (3434, 1.3% faster), Intel HD Graphics 530 (3332, 1.7% slower), and NVIDIA GeForce GT 730M (3316, 2.2% slower). This shows the P4600 sits in a narrow performance band around 3300–3450 points, with no rival more than 2.2% away.
The NVIDIA RTX PRO 4000 Blackwell SFF has a 3DMark Steel Nomad DX12 score of 2910, also in the 19th percentile. Its nearest rivals are tightly clustered: NVIDIA GeForce RTX 4060 Ti 16 GB (2907, 0.1% slower), NVIDIA GeForce RTX 4060 Ti 8 GB (2913, 0.1% faster), NVIDIA Quadro P600 (2923, 0.4% faster), and NVIDIA GeForce RTX 4010 (2893, 0.6% slower). The RTX PRO 4000 essentially matches these cards in this specific test, with deltas under 0.6%.
The raw compute figures tell the real story. The RTX PRO 4000 delivers 24.05 TFLOPS FP32, while the P4600 manages 384.0 GFLOPS — a difference of roughly 62.6 times. Pixel rate favors the RTX PRO 4000 at 128.8 GPixel/s versus 2.400 GPixel/s, a 53.7-fold advantage. Texture rate is 375.8 GTexel/s versus 24.00 GTexel/s, a 15.7-fold gap. These differences are so large that the P4600 cannot run workloads that the RTX PRO 4000 handles routinely.
Architecture Differences
The Intel HD Graphics P4600 uses the Haswell GT2 chip built on Intel's 22 nm process. It is part of the Generation 7.5 architecture, specifically the HD Graphics-W (Haswell) family. The chip contains 160 shading units, 20 texture mapping units, and 2 ROPs. Memory is system shared, with bandwidth listed as system dependent. The bus interface is Ring Bus, and the slot width is IGP, meaning it has no dedicated card footprint.
The NVIDIA RTX PRO 4000 Blackwell SFF uses the GB203 chip on TSMC's 5 nm process. It is Blackwell 2.0 architecture, from the Blackwell PRO W (x000) generation. The chip has 45,600 million transistors on a 378 mm² die, yielding a transistor density of 120.6M per mm². It packs 8960 shading units, 280 TMUs, 96 ROPs, 70 RT cores, and 280 tensor cores. Memory is 24 GB of GDDR7 on a 192-bit bus, delivering 432.0 GB/s bandwidth at 1125 MHz (18 Gbps effective).
Process technology is a major separator. Intel's 22 nm node is from 2012-2013, while TSMC's 5 nm is a leading-edge process from the early 2020s. The RTX PRO 4000 also has dedicated hardware for ray tracing and tensor operations, which the P4600 lacks entirely. API support differs: the RTX PRO 4000 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the P4600 only reaches DirectX 12 (11_1), OpenGL 4.3, and Vulkan 1.0.
Power and physical characteristics diverge sharply. The P4600 is rated at 84 W TDP and is an integrated part with no slot width or power connectors. The RTX PRO 4000 is 70 W TDP, dual-slot, with no power connectors, and measures 167 mm by 69 mm by 40 mm. The suggested PSU for the RTX PRO 4000 is 250 W, while the P4600 has none listed. The RTX PRO 4000 uses PCIe 5.0 x8, a modern interface, versus the P4600's Ring Bus.
Where Each One Wins
The Intel HD Graphics P4600 wins in one narrow category: its Geekbench OpenCL score of 3389 is numerically higher than the RTX PRO 4000's 3DMark Steel Nomad score of 2910. However, these are different tests measuring different workloads, so this is not a meaningful victory. The P4600 also consumes more power at 84 W versus 70 W, which is not a win but a point of comparison.
The NVIDIA RTX PRO 4000 wins in every meaningful performance metric. FP32 compute is 24.05 TFLOPS versus 384.0 GFLOPS, a 62.6x advantage. Pixel rate is 128.8 GPixel/s versus 2.400 GPixel/s, a 53.7x advantage. Texture rate is 375.8 GTexel/s versus 24.00 GTexel/s, a 15.7x advantage. The RTX PRO 4000 has 24 GB of dedicated GDDR7 memory versus system shared memory with system dependent bandwidth. It has 70 RT cores and 280 tensor cores, enabling ray tracing and AI workloads that the P4600 cannot attempt.
The RTX PRO 4000 also wins on connectivity and output. It has 4x mini-DisplayPort 2.1b outputs, while the P4600's display outputs are motherboard dependent. The RTX PRO 4000 supports PCIe 5.0 x8, a much faster interface than Ring Bus. Its production status is active, while the P4600 is end-of-life. The RTX PRO 4000's release date is 2025, versus 2013 for the P4600.
For use cases, the P4600 is only suitable for basic 2D desktop rendering or legacy applications that require its specific feature set. The RTX PRO 4000 handles modern 3D rendering, ray tracing, AI inference, and professional visualization workloads. The data shows no scenario where the P4600 outperforms the RTX PRO 4000 in actual processing capability.
The Verdict
The verdict is unambiguous: the NVIDIA RTX PRO 4000 Blackwell SFF is the superior product by every quantitative measure that matters for performance. Its FP32 throughput of 24.05 TFLOPS is orders of magnitude above the P4600's 384.0 GFLOPS. Its 24 GB GDDR7 memory with 432.0 GB/s bandwidth dwarfs the P4600's system shared memory. The RTX PRO 4000 has 8960 shading units versus 160, 280 TMUs versus 20, and 96 ROPs versus 2. It also adds 70 RT cores and 280 tensor cores, features absent from the P4600.
The P4600's only quantitative advantage is a higher Geekbench OpenCL score (3389 vs 2910), but this is a cross-benchmark comparison that does not translate to real performance. The P4600 is end-of-life, based on 22 nm technology from 2013, and supports only DirectX 12 (11_1), OpenGL 4.3, and Vulkan 1.0. The RTX PRO 4000 is active, built on 5 nm, and supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.
Who should pick which? Anyone needing modern GPU acceleration for professional workloads should choose the RTX PRO 4000. Its benchmark score aligns with the GeForce RTX 4060 Ti series, indicating it is a capable mid-range workstation card. The P4600 should only be considered for legacy systems or basic display output, where its integrated nature and motherboard-dependent outputs are acceptable. The data leaves no room for debate: the RTX PRO 4000 is the only viable choice for any serious computing task.
FAQ
Q: Is the Intel HD Graphics P4600 faster than the NVIDIA RTX PRO 4000 in any benchmark?
A: The P4600 has a higher Geekbench OpenCL score of 3389 versus the RTX PRO 4000's 3DMark Steel Nomad score of 2910, but these are different tests measuring different workloads, so this does not indicate real-world superiority.
Q: What is the FP32 compute difference between the two GPUs?
A: The RTX PRO 4000 delivers 24.05 TFLOPS FP32, while the P4600 provides 384.0 GFLOPS. This means the RTX PRO 4000 has approximately 62.6 times the FP32 throughput.
Q: How much memory does each GPU have?
A: The RTX PRO 4000 has 24 GB of GDDR7 memory on a 192-bit bus with 432.0 GB/s bandwidth. The P4600 uses system shared memory with system dependent bandwidth.
Q: What process nodes are used?
A: The RTX PRO 4000 uses TSMC's 5 nm process, while the P4600 uses Intel's 22 nm process. The RTX PRO 4000's chip has 45,600 million transistors on a 378 mm² die.
Q: Which GPU supports ray tracing?
A: Only the RTX PRO 4000 supports ray tracing, with 70 dedicated RT cores. The P4600 has no RT cores or tensor cores.
Q: What is the release date and production status of each?
A: The RTX PRO 4000 was released on 2025-08-10 and is active. The P4600 was released on 2013-05-31 and is end-of-life.
Specification Differences
| Specification | Intel HD Graphics P4600 | NVIDIA RTX PRO 4000 Blackwell SFF |
|---|---|---|
| Architecture | Generation 7.5 | Blackwell 2.0 |
| Process Node | 22 nm | 5 nm |
| Foundry | Intel | TSMC |
| Transistors | Not listed | 45,600 million |
| Die Size | Not listed | 378 mm² |
| Shading Units | 160 | 8960 |
| TMUs | 20 | 280 |
| ROPs | 2 | 96 |
| RT Cores | None | 70 |
| Tensor Cores | None | 280 |
| Base Clock | 350 MHz | 405 MHz |
| Boost Clock | 1200 MHz | 1342 MHz |
| Memory Size | System Shared | 24 GB |
| Memory Type | System Shared | GDDR7 |
| Memory Bus Width | System Shared | 192 bit |
| Memory Bandwidth | System Dependent | 432.0 GB/s |
| Pixel Rate | 2.400 GPixel/s | 128.8 GPixel/s |
| Texture Rate | 24.00 GTexel/s | 375.8 GTexel/s |
| FP32 | 384.0 GFLOPS | 24.05 TFLOPS |
| FP16 | Not listed | 24.05 TFLOPS (1:1) |
| TDP | 84 W | 70 W |
| Slot Width | IGP | Dual-slot |
| Power Connectors | None | None |
| Suggested PSU | Not listed | 250 W |
| Bus Interface | Ring Bus | PCIe 5.0 x8 |
| Display Outputs | Motherboard Dependent | 4x mini-DisplayPort 2.1b |
| DirectX | 12 (11_1) | 12 Ultimate (12_2) |
| OpenGL | 4.3 | 4.6 |
| Vulkan | 1.0 | 1.4 |
| Production Status | End-of-life | Active |
| Release Date | 2013-05-31 | 2025-08-10 |