Intel HD Graphics 530 vs NVIDIA GeForce RTX 4060 Ti 8 GB Comparison

Intel
GPU

Intel HD Graphics 530

CORE STATE Skylake GT2
VRAM System Shared
CLOCK SPEED 950 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE Generation 9.0
nm
PROCESS 14 nm+
LAUNCH DATE 2015
VS
NVIDIA
GEFORCE

GeForce RTX 4060 Ti 8 GB

CORE STATE AD106
VRAM 8 GB
CLOCK SPEED 2535 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

geekbench_metal
5,025
N/A
geekbench_opencl
3,550
N/A
geekbench_vulkan
1,422
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
2,913

Analysis: Intel HD Graphics 530 vs NVIDIA GeForce RTX 4060 Ti 8 GB

Intel HD Graphics 530 and NVIDIA GeForce RTX 4060 Ti 8 GB occupy opposite ends of the GPU spectrum, separated by nearly eight years of silicon evolution and a fundamental difference in purpose. The data shows an integrated processor graphics solution from the Skylake generation facing a discrete Ada Lovelace card, and the benchmark results reflect that gulf, though not in the way the raw specifications might suggest. This analysis walks through the available numbers to establish where each part stands.

Head-to-Head Benchmarks

The benchmark database contains no direct head-to-head test results between these two products; the `headToHeadBenchmarks` field is empty. This forces the comparison to rely on the aggregate benchmark scores and the nearest rival data points to contextualize performance.

The Intel HD Graphics 530 posts an average benchmark score of 3332, with individual results of 5025 in Geekbench Metal, 3550 in Geekbench OpenCL, and 1422 in Geekbench Vulkan. Its percentile rank against all GPUs sits at 20, meaning it outperforms roughly one-fifth of the database entries. The nearest rival comparison shows a tight cluster: it leads the NVIDIA GeForce GT 730M by 0.5% (3316 average), leads the GeForce 920M by 1.4% (3287), trails the Intel HD Graphics P4600 by 1.7% (3389), and trails the GeForce GT 740 by 2.9% (3431). These deltas are negligible, placing the HD 530 firmly in entry-level integrated territory.

The RTX 4060 Ti 8 GB presents a single benchmark entry: a 3DMark Steel Nomad DX12 score of 2913. Its average benchmark score is likewise 2913, and its percentile rank is 19, just below the HD 530’s 20th percentile. The nearest rivals for the RTX 4060 Ti are equally tight: it edges the RTX PRO 4000 Blackwell SFF by 0.1% (2910), leads the RTX 4060 Ti 16 GB by 0.2% (2907), trails the Quadro P600 by 0.3% (2923), and leads the RTX 4010 by 0.7% (2893). The similarity in these scores suggests the Steel Nomad workload captures a specific performance band, but the absolute numbers are not directly comparable to the HD 530’s Geekbench results.

Interpreting these scores requires caution. The HD 530’s average of 3332 comes from OpenCL, Vulkan, and Metal tests, while the RTX 4060 Ti’s 2913 comes from a DirectX 12 steel nomad workload. Different APIs and workloads mean the raw numbers cannot be subtracted to determine a winner. What the data does show is that the RTX 4060 Ti’s score places it in the 19th percentile, while the HD 530 sits at 20th, a statistical near-tie in relative standing despite the vast architectural differences.

Architecture Differences

The Intel HD Graphics 530 is built on the Generation 9.0 architecture, specifically the Skylake GT2 chip, fabricated on Intel’s 14 nm+ process. The die measures 123 mm². It features 192 shading units, 24 texture mapping units, and 3 raster output units. Clock speeds start at 350 MHz base and reach 950 MHz boost. The memory subsystem is entirely system-shared, with the bus width, type, and bandwidth all listed as "System Shared" or "System Dependent." The pixel rate is 2.850 GPixel/s, the texture rate is 22.80 GTexel/s, and FP32 performance is 364.8 GFLOPS. FP16 is 729.6 GFLOPS with a 2:1 ratio. The TDP is 15 W, and the slot width is IGP, indicating it is integrated into the processor. The bus interface is Ring Bus, and display outputs are motherboard dependent. It supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.3.

The NVIDIA GeForce RTX 4060 Ti 8 GB uses the Ada Lovelace architecture with the AD106 chip, fabricated on TSMC’s 5 nm process. The die size is 188 mm², housing 22,900 million transistors for a density of 121.8 million per mm². The GPU has 4352 shading units, 136 TMUs, 48 ROPs, 34 ray tracing cores, and 136 tensor cores. Base clock is 2310 MHz, boost clock is 2535 MHz. Memory is 8 GB of GDDR6 on a 128-bit bus, providing 288.0 GB/s bandwidth with an effective speed of 18 Gbps. The pixel rate is 121.7 GPixel/s, texture rate is 344.8 GTexel/s, and FP32 performance is 22.06 TFLOPS. FP16 is also 22.06 TFLOPS at a 1:1 ratio. TDP is 160 W, slot width is dual-slot, and it uses a single 16-pin power connector with a suggested PSU of 450 W. The bus interface is PCIe 4.0 x8. Display outputs include one HDMI 2.1 and three DisplayPort 1.4a. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The generation gap is stark. Intel’s 14 nm+ process versus TSMC’s 5 nm process represents a major node leap, and the transistor count difference is monumental: 22,900 million on the RTX 4060 Ti versus no listed transistor count for the HD 530. The RTX 4060 Ti has roughly 23 times the shading units, over five times the TMUs, and sixteen times the ROPs. It also adds dedicated ray tracing and tensor cores, capabilities absent from the HD 530 entirely.

FAQ

Q: Which GPU has a higher average benchmark score?

A: The Intel HD Graphics 530 has an average benchmark score of 3332, while the NVIDIA GeForce RTX 4060 Ti 8 GB has an average of 2913. However, these come from different test suites (Geekbench variants for Intel, 3DMark Steel Nomad for NVIDIA) and are not directly comparable.

Q: How does each GPU compare to its nearest rivals?

A: The HD 530 leads the GeForce GT 730M by 0.5% and the GeForce 920M by 1.4%, while trailing the HD Graphics P4600 by 1.7% and the GeForce GT 740 by 2.9%. The RTX 4060 Ti leads the RTX PRO 4000 Blackwell SFF by 0.1%, the RTX 4060 Ti 16 GB by 0.2%, and the RTX 4010 by 0.7%, while trailing the Quadro P600 by 0.3%.

Q: What is the process node difference between the two?

A: The Intel HD Graphics 530 is fabricated on Intel’s 14 nm+ process, while the NVIDIA GeForce RTX 4060 Ti 8 GB uses TSMC’s 5 nm process.

Q: Does the RTX 4060 Ti support ray tracing?

A: Yes, the RTX 4060 Ti features 34 ray tracing cores, a capability entirely absent from the HD 530, which has no RT cores listed.

Q: What are the memory configurations?

A: The HD 530 uses system-shared memory with no dedicated VRAM, type, or bus width specified. The RTX 4060 Ti has 8 GB of GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth.

Q: Which GPU has a higher FP32 performance?

A: The RTX 4060 Ti delivers 22.06 TFLOPS of FP32 performance, compared to the HD 530’s 364.8 GFLOPS, a difference of roughly 60 times.

Specification Differences

The two GPUs differ across nearly every specification field. The HD 530 uses Intel’s Generation 9.0 architecture on a 14 nm+ node with a die size of 123 mm², while the RTX 4060 Ti uses Ada Lovelace on TSMC’s 5 nm node with a 188 mm² die and 22,900 million transistors. Shading units are 192 versus 4352; TMUs are 24 versus 136; ROPs are 3 versus 48. The RTX 4060 Ti adds 34 RT cores and 136 tensor cores; the HD 530 has neither. Base clocks are 350 MHz versus 2310 MHz, and boost clocks are 950 MHz versus 2535 MHz. Memory differs fundamentally: system shared versus 8 GB GDDR6 on a 128-bit bus with 288.0 GB/s bandwidth. Pixel rate is 2.850 GPixel/s versus 121.7 GPixel/s; texture rate is 22.80 GTexel/s versus 344.8 GTexel/s; FP32 is 364.8 GFLOPS versus 22.06 TFLOPS; FP16 is 729.6 GFLOPS (2:1) versus 22.06 TFLOPS (1:1). TDP is 15 W versus 160 W. Slot width is IGP versus dual-slot. Power connectors are absent versus one 16-pin, with a suggested PSU of 450 W for the RTX 4060 Ti. Bus interface is Ring Bus versus PCIe 4.0 x8. Display outputs are motherboard dependent versus one HDMI 2.1 and three DisplayPort 1.4a. DirectX support is 12 (12_1) versus 12 Ultimate (12_2); Vulkan support is 1.3 versus 1.4. The HD 530 was released on 2015-08-31, while the RTX 4060 Ti was released on 2023-05-17. The RTX 4060 Ti has a launch MSRP of 399 USD. The HD 530 has no listed MSRP.

Where Each One Wins

The Intel HD Graphics 530 wins in power efficiency and integration. Its 15 W TDP is a fraction of the RTX 4060 Ti’s 160 W, and its IGP slot width means it requires no additional cooling or power connectors. It is a zero-cost addition to a Skylake processor, with display output handled by the motherboard. In benchmark terms, its average score of 3332 is higher than the RTX 4060 Ti’s 2913, and its 20th percentile rank edges out the RTX 4060 Ti’s 19th. For workloads that rely on OpenCL, Vulkan, or Metal across a shared memory pool, the HD 530 holds its own among its immediate rivals, beating the GT 730M and 920M.

The NVIDIA GeForce RTX 4060 Ti 8 GB wins on raw compute capability. Its 22.06 TFLOPS FP32, 344.8 GTexel/s texture rate, and 121.7 GPixel/s pixel rate dwarf the HD 530’s numbers. It has dedicated hardware for ray tracing and tensor operations, 8 GB of dedicated GDDR6 memory with 288.0 GB/s bandwidth, and a boost clock of 2535 MHz. Its single 3DMark Steel Nomad DX12 score of 2913 places it in a tight competitive band with the RTX PRO 4000 Blackwell SFF and RTX 4060 Ti 16 GB. The PCIe 4.0 x8 interface and modern display outputs (one HDMI 2.1, three DisplayPort 1.4a) give it connectivity advantages over the HD 530’s motherboard-dependent outputs. Its 5 nm process node and 22,900 million transistors represent the peak of silicon density in this comparison.

The Verdict

The data supports a clear split based on use case. For a system requiring minimal power draw, no discrete cooling, and basic graphics output, the Intel HD Graphics 530 is the only viable option in this comparison. Its 15 W TDP, IGP form factor, and system-shared memory make it suitable for lightweight computing tasks where a dedicated GPU is unnecessary. Its benchmark scores, while low in absolute terms, place it competitively among similar-era integrated parts.

For any workload requiring substantial graphics compute, the NVIDIA GeForce RTX 4060 Ti 8 GB is the definitive choice. The specification sheet alone justifies this: 4352 shading units, 136 TMUs, 48 ROPs, 34 RT cores, 136 tensor cores, and 8 GB of GDDR6 with 288.0 GB/s bandwidth. The 22.06 TFLOPS FP32 performance is approximately 60 times that of the HD 530. The RTX 4060 Ti’s percentile rank of 19, while numerically similar to the HD 530’s 20, is derived from a modern DirectX 12 workload that stresses the GPU far beyond what the HD 530 could handle; the HD 530’s percentile comes from older Geekbench tests that do not reflect contemporary gaming or compute demands. The RTX 4060 Ti also supports DirectX 12 Ultimate and Vulkan 1.4, compared to the HD 530’s DirectX 12 (12_1) and Vulkan 1.3, making it the only one of the two future-proof for current and upcoming software standards.

Users should select the HD 530 only for legacy systems or ultra-low-power builds where the absence of a discrete GPU is a requirement. Everyone else should choose the RTX 4060 Ti 8 GB, accepting its 160 W TDP and dual-slot footprint for the massive performance and feature advantage the data confirms.

DETAILED SPECIFICATIONS

SPECIFICATION
HD Graphics 530
RTX 4060 Ti 8 GB
Core Specs
Shading Units
192
4,352 +2166.7%
Shaders
192
4,352 +2166.7%
TMUs
24
136 +466.7%
ROPs
3
48 +1500.0%
SM Count
—
34
Execution Units
24
—
Clocks
Base Clock
350 MHz
2310 MHz
Boost Clock
950 MHz
2535 MHz
Memory Clock
System Shared
2250 MHz 18 Gbps effective
Memory
Memory Size
System Shared
8 GB
VRAM (MB)
—
8,192
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
288.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
—
32 MB
Performance
Pixel Rate
2.850 GPixel/s
121.7 GPixel/s
Texture Rate
22.80 GTexel/s
344.8 GTexel/s
FP32 (TFLOPS)
364.8 GFLOPS
22.06 TFLOPS
FP64 (TFLOPS)
91.20 GFLOPS (1:4)
344.8 GFLOPS (1:64)
FP16 (TFLOPS)
729.6 GFLOPS (2:1)
22.06 TFLOPS (1:1)
AI/RT
RT Cores
—
34
Tensor Cores
—
136
Power
TDP
15 W
160 W
TDP (W)
15
160 +966.7%
Suggested PSU
—
450 W
Power Connectors
—
1x 16-pin
Architecture
Architecture
Generation 9.0
Ada Lovelace
GPU Name
Skylake GT2
AD106
Generation
HD Graphics (Skylake)
GeForce 40
Process Size
14 nm+
5 nm
Transistors
—
22,900 million
Die Size
123 mm²
188 mm²
Foundry
Intel
TSMC
Density
—
121.8M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
3.0
3.0
CUDA
—
8.9
Shader Model
6.4
6.8
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
111 mm 4.4 inches
Outputs
Motherboard Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
Ring Bus
PCIe 4.0 x8
Other
Launch Price
—
399 USD
Production
End-of-life
End-of-life
Predecessor
—
GeForce 30
Successor
—
GeForce 50
View HD Graphics 530 Details View GeForce RTX 4060 Ti 8 GB Details