Intel Arc Graphics 4 Xe Mobile vs NVIDIA GeForce RTX 5060 Ti 16 GB Comparison
Intel Arc Graphics 4 Xe Mobile
GeForce RTX 5060 Ti 16 GB
PERFORMANCE BENCHMARKS
Analysis: Intel Arc Graphics 4 Xe Mobile vs NVIDIA GeForce RTX 5060 Ti 16 GB
Where Each One Wins
The recorded data splits these two parts cleanly by role. The Intel Arc Graphics 4 Xe Mobile is an integrated graphics processor built into a Panther Lake mobile chip. It has no dedicated video memory, no expansion slot, and no power connectors. Its benchmark presence is defined by its percentile ranking: 50th percentile among all GPUs in the database, with an average benchmark score of zero, meaning no discrete benchmark runs are recorded for it. The NVIDIA GeForce RTX 5060 Ti 16 GB, by contrast, is a full add-in board with 16 GB of GDDR7 memory, a 128-bit bus, and 448.0 GB/s of bandwidth. It has recorded scores across eight benchmark tests, an average score of 4970, and sits at the 29th percentile among all GPUs.
The use-case split is therefore not about which part wins more tests, since the Intel part has no recorded benchmark scores. Instead, the split is about deployment. The Intel Arc Graphics 4 Xe Mobile wins in scenarios where a separate GPU cannot fit: it is an IGP with a 25 W TDP, system-shared memory, and a slot width of IGP. The NVIDIA part wins in scenarios that demand sustained rendering throughput, ray tracing, tensor work, and large local memory. The RTX 5060 Ti 16 GB carries 4608 shading units, 144 tensor cores, and 36 ray tracing cores. The Intel part has 512 shading units, no tensor core count listed, and 4 ray tracing cores.
Benchmark wins are one-sided only because the data is one-sided. The RTX 5060 Ti 16 GB has scores in 3DMark Steel Nomad DX12 (4019), Passmark DirectX 10 (144), DirectX 11 (219), DirectX 12 (89), DirectX 9 (238), G2D (1206), G3D (22618), and GPU Compute (11224). The Intel Arc Graphics 4 Xe Mobile has no entries in the head-to-head benchmark array and zero wins. For any task that produces a frame buffer, the NVIDIA part is the only one with measured results.
Architecture Differences
The two parts come from different foundries, different nodes, and different design philosophies. Intel builds the Arc Graphics 4 Xe Mobile on a 3 nm process at Intel, using the Xe3-LPG architecture. The chip is Panther Lake, and the generation is Arc Graphics-M (Panther Lake). The base clock is 300 MHz with a boost of 2300 MHz. Memory is entirely system-shared, with type, bus width, and bandwidth all listed as system dependent. The thermal design power is 25 W.
NVIDIA builds the GeForce RTX 5060 Ti 16 GB on a 5 nm process at TSMC, using the Blackwell 2.0 architecture. The chip is GB206, and the generation is GeForce 50. Transistor count is 21,900 million on a die size of 181 mm², giving a transistor density of 121.0M per mm². The base clock is 2407 MHz with a boost of 2572 MHz. Memory is 16 GB of GDDR7 on a 128-bit bus, with 448.0 GB/s of bandwidth. The TDP is 180 W, it uses a dual-slot cooler, one 8-pin power connector, and a suggested 450 W power supply. The bus interface is PCIe 5.0 x8.
Core counts differ sharply. The Intel part has 512 shading units, 32 texture mapping units, 16 ROPs, and 4 ray tracing cores. The NVIDIA part has 4608 shading units, 144 TMUs, 48 ROPs, 36 ray tracing cores, and 144 tensor cores. The Intel part lists no tensor core field value. Pixel rate for Intel is 36.80 GPixel/s versus 123.5 GPixel/s for NVIDIA. Texture rate is 73.60 GTexel/s versus 370.4 GTexel/s. FP32 compute is 2.355 TFLOPS versus 23.70 TFLOPS. FP16 is 4.710 TFLOPS with a 2:1 ratio for Intel, versus 23.70 TFLOPS at a 1:1 ratio for NVIDIA.
Both parts support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Display outputs differ: the Intel part is portable device dependent, while the NVIDIA part has 1x HDMI 2.1b and 3x DisplayPort 2.1b. Physical dimensions for the NVIDIA part are 241 mm length, 111 mm height, and 40 mm width. The Intel part has no listed dimensions because it is an IGP.
Head-to-Head Benchmarks
The head-to-head benchmark array is empty, so no direct matched comparison exists in the database. The only comparable numbers come from the RTX 5060 Ti 16 GB's own benchmark suite and its nearest rivals. The average benchmark score for the RTX 5060 Ti 16 GB is 4970. Its nearest rivals are the NVIDIA Quadro 4000 at 4979 with a delta of -0.2%, the AMD Radeon R7 Graphics at 4998 with a delta of -0.6%, the AMD Radeon R7 M360 at 4931 with a delta of 0.8%, and the AMD Radeon R7 M265 at 4929 with a delta of 0.8%. This means the RTX 5060 Ti 16 GB trails the Quadro 4000 by 0.2% and the Radeon R7 Graphics by 0.6%, while leading the R7 M360 and R7 M265 by 0.8% each. The deltas are small, and the four rivals cluster within a 69-point band.
Within its own benchmark results, the strongest recorded score for the RTX 5060 Ti 16 GB is the Passmark G3D result of 22618, which is roughly double its GPU Compute score of 11224. The 3DMark Steel Nomad DX12 score is 4019. Passmark DirectX 9 returns 238, DirectX 11 returns 219, DirectX 10 returns 144, and DirectX 12 returns 89. The G2D score is 1206. These numbers indicate that the part's DirectX 12 performance in Passmark is lower than its DirectX 9 and DirectX 11 results, while the dedicated 3DMark workload produces a substantially higher score than the Passmark suite.
The Intel Arc Graphics 4 Xe Mobile has no benchmark scores, no average score, and no nearest rivals listed. Its percentile of 50 places it at the midpoint of the database, but with zero recorded scores, that percentile reflects the absence of data rather than measured performance. Any statement about its relative speed would have no numerical basis in the database.
FAQ
Q: Does the Intel Arc Graphics 4 Xe Mobile have any recorded benchmark scores?
A: No. The database lists its average benchmark score as 0, its benchmark array is empty, and it has no nearest rivals. Its percentile versus all GPUs is 50, but that is not tied to any measured benchmark result.
Q: What is the memory configuration of each part?
A: The Intel Arc Graphics 4 Xe Mobile uses system-shared memory, with size, type, bus width, and bandwidth all listed as system dependent. The NVIDIA GeForce RTX 5060 Ti 16 GB uses 16 GB of GDDR7 on a 128-bit bus with 448.0 GB/s of bandwidth.
Q: How do the compute capabilities compare?
A: The Intel part delivers 2.355 TFLOPS FP32 and 4.710 TFLOPS FP16 with a 2:1 ratio. The NVIDIA part delivers 23.70 TFLOPS FP32 and 23.70 TFLOPS FP16 with a 1:1 ratio. The NVIDIA part also has 144 tensor cores, while the Intel part lists no tensor core count.
Q: What are the power requirements?
A: The Intel part has a 25 W TDP, is an IGP, and uses no power connectors. The NVIDIA part has a 180 W TDP, uses a dual-slot cooler, requires one 8-pin power connector, and has a suggested 450 W power supply.
Q: Which part has a better percentile ranking?
A: The Intel Arc Graphics 4 Xe Mobile sits at the 50th percentile among all GPUs. The NVIDIA GeForce RTX 5060 Ti 16 GB sits at the 29th percentile. The Intel ranking is based on no recorded scores, while the NVIDIA ranking is based on an average benchmark score of 4970.
Q: What is the closest rival to the RTX 5060 Ti 16 GB in the database?
A: The NVIDIA Quadro 4000 has an average score of 4979, which is 0.2% higher than the RTX 5060 Ti 16 GB. The AMD Radeon R7 M360 and R7 M265 both sit 0.8% lower.
The Verdict
The data supports a clear split. For a mobile platform where a discrete GPU is not possible, the Intel Arc Graphics 4 Xe Mobile is the only option of the two. It is an integrated part on a 3 nm process, draws 25 W, uses system-shared memory, and has no power connectors. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, matching the API support of the NVIDIA part. Its 512 shading units and 4 ray tracing cores are sufficient for basic rendering workloads, but the database contains no benchmark evidence of its performance level.
For any workload that has been measured, the NVIDIA GeForce RTX 5060 Ti 16 GB is the part with data behind it. It produces 23.70 TFLOPS FP32, 370.4 GTexel/s, and 123.5 GPixel/s. It has 4608 shading units, 36 ray tracing cores, and 144 tensor cores. It has 16 GB of GDDR7 memory, a 128-bit bus, and 448.0 GB/s of bandwidth. Its average benchmark score is 4970, and its nearest rivals are all within roughly 1% of that figure, which places it in a narrowly contested performance band rather than a dominant one.
The recorded scores show that the RTX 5060 Ti 16 GB is not a top-tier part. Its 29th percentile ranking and the tight cluster of rivals near 4970 indicate mid-pack positioning. The Passmark results are mixed, with G3D at 22618 but DirectX 12 at 89, which suggests the part's performance varies heavily by test methodology. The 3DMark Steel Nomad DX12 score of 4019 is the more demanding modern workload result.
Who should pick which: a system builder constrained to an integrated GPU with no expansion slot and a 25 W budget has no choice but the Intel part. A builder who needs a dual-slot add-in card with 16 GB of local GDDR7, a PCIe 5.0 x8 interface, and measured benchmark results should pick the NVIDIA part. The Intel part wins on integration and power envelope; the NVIDIA part wins on every measured performance metric in the database.
Specification Differences
| Field | Intel Arc Graphics 4 Xe Mobile | NVIDIA GeForce RTX 5060 Ti 16 GB |
|---|---|---|
| Manufacturer | Intel | NVIDIA |
| Chip | Panther Lake | GB206 |
| Architecture | Xe3-LPG | Blackwell 2.0 |
| Generation | Arc Graphics-M (Panther Lake) | GeForce 50 |
| Process node | 3 nm | 5 nm |
| Foundry | Intel | TSMC |
| Transistors | unknown | 21,900 million |
| Die size | unknown | 181 mm² |
| Transistor density | null | 121.0M / mm² |
| Base clock | 300 MHz | 2407 MHz |
| Boost clock | 2300 MHz | 2572 MHz |
| Memory size | System Shared | 16 GB |
| Memory type | System Shared | GDDR7 |
| Memory bus width | System Shared | 128 bit |
| Memory bandwidth | System Dependent | 448.0 GB/s |
| Shading units | 512 | 4608 |
| TMUs | 32 | 144 |
| ROPs | 16 | 48 |
| Ray tracing cores | 4 | 36 |
| Tensor cores | null | 144 |
| Pixel rate | 36.80 GPixel/s | 123.5 GPixel/s |
| Texture rate | 73.60 GTexel/s | 370.4 GTexel/s |
| FP32 | 2.355 TFLOPS | 23.70 TFLOPS |
| FP16 | 4.710 TFLOPS (2:1) | 23.70 TFLOPS (1:1) |
| TDP | 25 W | 180 W |
| Slot width | IGP | Dual-slot |
| Power connectors | None | 1x 8-pin |
| Suggested PSU | null | 450 W |
| Bus interface | IGP | PCIe 5.0 x8 |
| Display outputs | Portable Device Dependent | 1x HDMI 2.1b, 3x DisplayPort 2.1b |
| Length | null | 241 mm |
| Height | null | 111 mm |
| Width | null | 40 mm |
| Release date | 2026-01-26 | 2025-04-15 |
| Production status | Active | Active |
| Average benchmark score | 0 | 4970 |
| Percentile vs all GPUs | 50 | 29 |