AMD Radeon RX 7400 OEM vs Intel Arc Graphics 2 Xe Mobile Comparison

AMD
RADEON

AMD Radeon RX 7400 OEM

CORE STATE Navi 33
VRAM 8 GB
CLOCK SPEED 1100 MHz
TDP 55 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 6 nm
LAUNCH DATE 2025
VS
Intel
GPU

Arc Graphics 2 Xe Mobile

CORE STATE Wildcat Lake
VRAM System Shared
CLOCK SPEED 2500 MHz
TDP 25 W
BUS WIDTH System Shared
ARCHITECTURE Xe3-LPG
nm
PROCESS 3 nm
LAUNCH DATE 2026

Analysis: AMD Radeon RX 7400 OEM vs Intel Arc Graphics 2 Xe Mobile

Where Each One Wins

The recorded data separates these two parts cleanly by form factor and intended workload. The AMD Radeon RX 7400 OEM is a discrete, single-slot solution built on the Radeon RX 7000 series, while the Intel Arc Graphics 2 Xe Mobile is an integrated graphics processor (IGP) belonging to the Arc Graphics-M (Wildcat Lake) generation. Their benchmark win counts are both zero, meaning the database contains no head-to-head benchmark entries for this pair. The analysis must therefore rely on architectural and specification differences rather than measured performance deltas.

The AMD part wins on raw compute density. It delivers 7.885 TFLOPS FP32 performance, which is more than six times the 1,280.0 GFLOPS FP32 figure of the Intel IGP. This suggests the RX 7400 OEM is positioned for workloads that demand sustained throughput: rendering, compute-heavy tasks, or any application that can exploit 1,792 shading units, 112 TMUs, and 64 ROPs. The Intel part, by contrast, uses only 256 shading units, 16 TMUs, and 8 ROPs. Its advantage lies in integration and power envelope, not absolute performance.

The Intel Arc Graphics 2 Xe Mobile wins on efficiency per watt in a different sense: it operates within a 25 W TDP compared to the AMD part's 55 W TDP. That is a decisive difference for portable or thermally constrained systems. The Intel IGP has no power connectors and uses system-shared memory, so it requires no dedicated VRAM allocation or additional board space. The AMD part needs a 1x 6-pin power connector and a suggested 250 W power supply, which places it firmly in desktop or larger chassis territory.

The use-case split is therefore clear: the AMD RX 7400 OEM targets discrete GPU workloads in systems that can accommodate a 167 mm card with external power, while the Intel Arc Graphics 2 Xe Mobile targets compact, power-sensitive mobile devices where integrated graphics are the only option. The data shows no overlap in their intended deployment scenarios.

FAQ

Q: Which GPU has the higher FP32 compute throughput?

A: The AMD Radeon RX 7400 OEM delivers 7.885 TFLOPS FP32, while the Intel Arc Graphics 2 Xe Mobile delivers 1,280.0 GFLOPS FP32. The AMD part is roughly six times faster in this metric.

Q: What memory configurations do these two parts use?

A: The AMD Radeon RX 7400 OEM uses 8 GB of GDDR6 on a 128-bit bus with 172.8 GB/s bandwidth. The Intel Arc Graphics 2 Xe Mobile uses system-shared memory, with a system-dependent bus width and bandwidth.

Q: How do their power requirements differ?

A: The AMD part has a 55 W TDP and requires a 1x 6-pin power connector plus a suggested 250 W power supply. The Intel part has a 25 W TDP, uses no power connectors, and is classified as an IGP.

Q: What are their process nodes?

A: The AMD Radeon RX 7400 OEM uses a 6 nm process at TSMC. The Intel Arc Graphics 2 Xe Mobile uses a 3 nm process at Intel.

Q: Do both support the same graphics APIs?

A: Yes. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

Q: Which part has more ray tracing cores?

A: The AMD Radeon RX 7400 OEM has 28 ray tracing cores. The Intel Arc Graphics 2 Xe Mobile has 2 ray tracing cores.

Head-to-Head Benchmarks

The database lists no head-to-head benchmark results for this pair, so there are no recorded percentage deltas or win counts to cite. However, the specification sheet offers several direct comparisons that function as proxy metrics.

FP32 throughput is the largest gap. The AMD part records 7.885 TFLOPS versus 1,280.0 GFLOPS for Intel. Converted, that means the AMD GPU provides 6.16 times the FP32 compute of the Intel IGP. This is not a small margin; it is the difference between a part that can drive moderately demanding rendering workloads and one that is suited to lighter tasks.

Texture and pixel rates follow the same pattern. The AMD RX 7400 OEM produces 123.2 GTexel/s and 70.40 GPixel/s. The Intel Arc Graphics 2 Xe Mobile produces 40.00 GTexel/s and 20.00 GPixel/s. The AMD part is 3.08 times faster in texture fill and 3.52 times faster in pixel fill. These metrics matter for resolution scaling and texture-heavy scenes, where the discrete part's larger ROP and TMU counts provide a structural advantage.

Clock speeds tell a different story. The Intel IGP boosts to 2500 MHz, more than double the AMD part's 1100 MHz boost clock. The Intel part also has a 300 MHz base clock versus 330 MHz for AMD. Higher clocks alone do not compensate for the massive difference in shading units, but they indicate the Intel part is designed to extract performance from a much smaller execution resource pool. The AMD part's lower clock and higher throughput suggest it relies on parallel width rather than frequency.

Memory bandwidth is another clear divide. The AMD part has a fixed 172.8 GB/s via GDDR6. The Intel part's bandwidth is listed as system dependent, meaning it shares whatever memory bandwidth the host platform provides. In a well-configured system, shared memory can be fast, but it is never dedicated, and the database records no specific figure for it.

The FP16 comparison is less one-sided. The AMD part records 7.885 TFLOPS FP16 with a 1:1 ratio, while the Intel part records 2.560 TFLOPS FP16 with a 2:1 ratio. The AMD part still leads by roughly 3.08 times, but the Intel implementation shows a deliberate design choice: it doubles FP16 throughput relative to its FP32 rate, which suggests some optimization for half-precision workloads despite its smaller overall compute footprint.

Specification Differences

The two parts differ across nearly every measurable field. The AMD Radeon RX 7400 OEM is built on the Navi 33 chip with RDNA 3.0 architecture, while the Intel Arc Graphics 2 Xe Mobile uses the Wildcat Lake chip with Xe3-LPG architecture. Their codenames also differ: Hotpink Bonefish for AMD, none listed for Intel.

Process technology separates them clearly. AMD uses a 6 nm node at TSMC with 13,300 million transistors on a 204 mm² die, resulting in a transistor density of 65.2M per mm². Intel uses a 3 nm node at Intel, but transistor count, die size, and density are all listed as unknown or null in the database.

Memory configuration is fundamentally different. The AMD part has 8 GB GDDR6, a 128-bit bus, and 172.8 GB/s bandwidth. The Intel part uses system-shared memory for everything: size, type, bus width, and bandwidth are all system dependent.

Compute resources differ substantially. AMD fields 1,792 shading units, 112 TMUs, 64 ROPs, and 28 ray tracing cores. Intel fields 256 shading units, 16 TMUs, 8 ROPs, and 2 ray tracing cores. Neither part lists tensor cores.

Clock behavior is inverted. AMD has a 330 MHz base and 1100 MHz boost. Intel has a 300 MHz base and 2500 MHz boost. This is a notable divergence: the integrated part runs at more than double the boost frequency.

Power delivery and physical footprint differ completely. The AMD part is a single-slot card, 167 mm long, with a 1x 6-pin power connector and a suggested 250 W power supply. The Intel part is an IGP with no power connectors, no listed dimensions, and no suggested PSU requirement.

Release timing also differs. The AMD part is dated 2025-08-07, and the Intel part is dated 2026-04-15. The Intel part is the newer design by roughly eight months.

Architecture Differences

The architectural split is fundamental. AMD uses RDNA 3.0, a discrete GPU architecture designed for dedicated graphics cards. Intel uses Xe3-LPG, an architecture explicitly built for integrated graphics in the Arc Graphics-M (Wildcat Lake) generation. These are not competing designs for the same socket; they are different answers to different problems.

The memory architecture reinforces this. AMD integrates 8 GB of GDDR6 on a 128-bit bus, giving the GPU its own high-bandwidth memory pool. Intel relies on system-shared memory, meaning the IGP borrows bandwidth from the host's main memory. The database lists Intel's bandwidth as system dependent, which is a direct admission that its performance scales with the rest of the platform. This is a structural difference, not a tuning difference: one part has dedicated memory, the other does not.

The compute architecture also diverges in ratio and scale. AMD's FP32 and FP16 rates are identical at 7.885 TFLOPS, which the database labels as a 1:1 ratio. Intel's FP16 rate is 2.560 TFLOPS against an FP32 rate of 1,280.0 GFLOPS, a 2:1 ratio. This means AMD treats FP32 and FP16 as equal-cost operations, while Intel spends extra effort on half-precision paths. The practical implication is that the Intel part may handle certain AI or media workloads with relatively better FP16 efficiency, but it still trails AMD in absolute FP16 throughput.

Ray tracing support exists on both, but the scale is wildly different: 28 ray tracing cores on AMD versus 2 on Intel. Both support DirectX 12 Ultimate (12_2), which means both are nominally capable of the same feature set, but the hardware resources available to execute those features are not comparable.

Process node differences favor Intel in density terms. A 3 nm node from Intel versus a 6 nm node from TSMC means the Intel part can fit more logic per area, though the database does not record transistor counts for Intel. The AMD part's 13,300 million transistors on 204 mm² gives a density of 65.2M per mm². Without Intel's die size or transistor count, a direct density comparison is impossible, but the process advantage is clear on paper.

The Verdict

The data indicates two products with almost no overlap in intended use. The AMD Radeon RX 7400 OEM is a discrete, single-slot GPU with 8 GB of dedicated GDDR6 memory, 7.885 TFLOPS FP32 throughput, and a 55 W TDP. It requires a 6-pin power connector, a suggested 250 W power supply, and a 167 mm card slot. It is built for systems that can house a dedicated graphics card and supply it with power.

The Intel Arc Graphics 2 Xe Mobile is an integrated processor with 256 shading units, system-shared memory, and a 25 W TDP. It requires no power connector, no dedicated memory, and no expansion slot. It is built for portable devices where the GPU must share the motherboard and memory subsystem with everything else.

Users who need maximum compute throughput, dedicated VRAM, and fixed memory bandwidth should look at the AMD part. The numbers are unambiguous: 6.16 times the FP32 throughput, 3.08 times the texture fill rate, and 3.52 times the pixel fill rate compared to the Intel IGP. The 28 ray tracing cores versus 2 also represent a substantial advantage for any ray-traced workload.

Users who prioritize low power consumption, small physical footprint, and zero additional board complexity should look at the Intel part. Its 25 W TDP is less than half the AMD part's 55 W TDP, and its integrated nature eliminates the need for any external power or slot. The higher 2500 MHz boost clock also indicates a design that tries to maximize performance within a tightly constrained power budget.

Neither part has recorded benchmark scores or rival deltas in the database, so any performance ranking beyond the specification sheet is not supported by the data. The specification differences are so large and so structural that they point to different market segments entirely. The AMD part is a discrete GPU for desktop-class workloads. The Intel part is an integrated GPU for mobile systems. The choice between them is not a question of which is faster, but which fits the host system.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 7400 OEM
Graphics 2 Xe Mobile
Core Specs
Shading Units
1,792
256 -85.7%
Shaders
1,792
256 -85.7%
TMUs
112
16 -85.7%
ROPs
64
8 -87.5%
Compute Units
28
—
Execution Units
—
4
Clocks
Base Clock
330 MHz
300 MHz
Boost Clock
1100 MHz
2500 MHz
Memory Clock
1350 MHz 10.8 Gbps effective
System Shared
Memory
Memory Size
8 GB
System Shared
VRAM (MB)
8,192
—
Memory Type
GDDR6
System Shared
Memory Bus
128 bit
System Shared
Bandwidth
172.8 GB/s
System Dependent
Cache
L1 Cache
128 KB per Array
64 KB (per EU)
L2 Cache
2 MB
16 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
70.40 GPixel/s
20.00 GPixel/s
Texture Rate
123.2 GTexel/s
40.00 GTexel/s
FP32 (TFLOPS)
7.885 TFLOPS
1,280.0 GFLOPS
FP64 (TFLOPS)
246.4 GFLOPS (1:32)
160.0 GFLOPS (1:8)
FP16 (TFLOPS)
7.885 TFLOPS (1:1)
2.560 TFLOPS (2:1)
AI/RT
RT Cores
28
2 -92.9%
XMX Cores
—
32
Matrix Cores
56
—
Power
TDP
55 W
25 W
TDP (W)
55
25 -54.5%
Suggested PSU
250 W
—
Power Connectors
1x 6-pin
None
Architecture
Architecture
RDNA 3.0
Xe3-LPG
GPU Name
Navi 33
Wildcat Lake
Codename
Hotpink Bonefish
—
Generation
Navi III (RX 7000)
Arc Graphics-M (Wildcat Lake)
Process Size
6 nm
3 nm
Transistors
13,300 million
unknown
Die Size
204 mm²
unknown
Foundry
TSMC
Intel
Density
65.2M / mm²
—
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
Shader Model
6.9
6.9
Physical
Slot Width
Single-slot
IGP
Length
167 mm 6.6 inches
—
Outputs
1x HDMI 2.1a3x DisplayPort 2.1
Portable Device Dependent
Bus Interface
PCIe 4.0 x8
IGP
Other
Production
—
Active
Predecessor
Navi II
HD Graphics-M
Successor
Navi IV
—
View Radeon RX 7400 OEM Details View Arc Graphics 2 Xe Mobile Details