AMD Radeon RX 9060 XT 8 GB vs NVIDIA Quadro K3000M Comparison
AMD Radeon RX 9060 XT 8 GB
Quadro K3000M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT 8 GB vs NVIDIA Quadro K3000M
The NVIDIA Quadro K3000M and AMD Radeon RX 9060 XT 8 GB represent two extremes of the GPU timeline, separated by over a decade of architectural evolution. The data shows a stark contrast: the Quadro K3000M is an end-of-life mobile workstation part from 2012, while the RX 9060 XT is an active desktop gaming card from 2025. Their benchmark scores, however, tell a surprising story of parity in a single synthetic test, despite the massive generational gap in specifications. The K3000M scores 4,241 in Geekbench OpenCL, while the RX 9060 XT scores 4,093 in 3DMark Steel Nomad DX12, placing them within 3.5% of each other, yet their architectural DNA and intended workloads could not be more different.
Where Each One Wins
The NVIDIA Quadro K3000M finds its niche in legacy professional environments. Its Kepler architecture and 2 GB of GDDR5 memory on a 256-bit bus are tailored for older workstation applications that rely on OpenGL 4.6 and DirectX 12 (11_0) feature sets. The data shows it holds a 1.2% performance advantage over the NVIDIA GeForce GTX 1050 Ti in its benchmark pool, indicating it still has enough compute headroom for dated CAD or DCC tasks. Its 75 W TDP and MXM module form factor make it suitable for mobile workstations where power efficiency is paramount, and its end-of-life status means it exists in the used market for legacy system repairs. The K3000M's 576 shading units and 48 TMUs deliver 31.39 GTexel/s of texture fill rate, which is competitive for its era but utterly eclipsed by modern parts.
The AMD Radeon RX 9060 XT 8 GB wins decisively in every modern metric that matters. Its 25.64 TFLOPS of FP32 compute is over 34 times higher than the K3000M's 753.4 GFLOPS, making it the clear choice for any contemporary workload. The 8 GB GDDR6 memory on a 128-bit bus provides 322.3 GB/s of bandwidth — more than 3.5 times the K3000M's 89.60 GB/s. The RX 9060 XT also brings 32 ray tracing cores and DirectX 12 Ultimate (12_2) support, enabling hardware-accelerated ray tracing and mesh shaders that the Kepler part cannot even attempt. Its 4 nm process node and 29,700 million transistors deliver a transistor density of 149.2M per mm², versus the K3000M's 12.0M per mm², meaning the AMD card packs vastly more complexity into a smaller die. The RX 9060 XT's 150 W TDP is double the Quadro's, but it also offers PCIe 5.0 x16 connectivity and modern display outputs (1x HDMI 2.1b, 2x DisplayPort 2.1a), making it the only viable option for current gaming or content creation systems.
Architecture Differences
The architectural gap is generational. The Quadro K3000M uses the GK104 chip on TSMC's 28 nm process, featuring 3,540 million transistors on a 294 mm² die. It is built on the Kepler architecture, which was designed for the DirectX 11 era, and its API support reflects this: DirectX 12 (11_0) is a compatibility layer, not true hardware-level support. The chip has 576 shading units, 48 TMUs, and 32 ROPs, with a base and boost clock locked at 654 MHz. Memory runs at 700 MHz (2.8 Gbps effective) across a 256-bit bus. The K3000M has no ray tracing cores and no tensor cores, and its FP16 throughput is null, meaning it processes half-precision data at a fraction of the rate modern GPUs achieve. Its 7.848 GPixel/s pixel rate and 31.39 GTexel/s texture rate are primitive by today's standards. The card uses an MXM-B (3.0) bus interface and draws power through the slot, with no external power connectors required.
The RX 9060 XT is a radically different animal. Built on the Navi 44 chip using TSMC's 4 nm process, it crams 29,700 million transistors into a smaller 199 mm² die, achieving over 12 times the transistor density of the Kepler chip. The RDNA 4.0 architecture is built for DirectX 12 Ultimate (12_2), with 2048 shading units, 128 TMUs, 64 ROPs, and 32 dedicated ray tracing cores. Base clock is 1700 MHz, game clock is 2530 MHz, and boost reaches 3130 MHz — nearly five times the Quadro's 654 MHz. Memory is 8 GB of GDDR6 at 2518 MHz (20.1 Gbps effective) on a 128-bit bus. The RX 9060 XT delivers 200.3 GPixel/s and 400.6 GTexel/s, representing 25.5 times the pixel throughput and 12.8 times the texture throughput of the K3000M. It also supports FP16 at a 1:1 ratio with FP32, meaning half-precision compute runs at the same 25.64 TFLOPS. The card uses a dual-slot design with a single 8-pin power connector, requires a 450 W power supply, and connects via PCIe 5.0 x16. Its codename is "Strix Point," and it belongs to the Navi IV (RX 9000) generation, succeeding the Navi III line.
Head-to-Head Benchmarks
There are no direct head-to-head benchmark results between these two cards in the data, so the comparison must rely on their respective nearest rival pools and absolute scores. The Quadro K3000M's Geekbench OpenCL score of 4,241 places it at the 25th percentile of all GPUs. Its nearest rival, the AMD Radeon Vega 3, scores 4,268, a delta of -0.6%, meaning the K3000M is essentially tied with that integrated part. The NVIDIA GeForce GTX 460M scores 4,282, putting the K3000M 1% behind it. Against the NVIDIA GeForce GTX 1050 Ti, the K3000M is 1.2% ahead, with that rival scoring 4,193. The AMD FirePro W2100 scores 4,295, making the K3000M 1.3% slower. These margins are all within noise, indicating the Quadro is a mid-pack performer in its synthetic test.
The RX 9060 XT's 3DMark Steel Nomad DX12 score of 4,093 sits at the 24th percentile of all GPUs, one point lower than the K3000M's percentile. Its nearest rivals show a similar clustering: the Intel HD Graphics 630 scores 4,075, placing the RX 9060 XT 0.4% ahead. The NVIDIA Quadro K2100M scores 4,151, meaning the RX 9060 XT is 1.4% behind that part. Against the NVIDIA GeForce GT 755M, the RX 9060 XT is 1.5% ahead, as that rival scores 4,033. The AMD Radeon R5 M330 scores 4,170, putting the RX 9060 XT 1.8% behind. This is a remarkable result for a modern card — it suggests that 3DMark Steel Nomad DX12 is either heavily CPU-bound or poorly optimized for RDNA 4.0, as the raw compute advantage should translate to a far larger score differential. The data shows the RX 9060 XT's 25.64 TFLOPS versus the K3000M's 753.4 GFLOPS, yet the benchmark scores are within 3.5% of each other. This discrepancy highlights that synthetic benchmarks often fail to capture real-world architectural efficiency.
The Verdict
The data is unambiguous for modern workloads: the AMD Radeon RX 9060 XT 8 GB is the only choice for any user running contemporary software. Its 25.64 TFLOPS FP32 compute, 322.3 GB/s memory bandwidth, and 32 ray tracing cores make it capable of tasks the Quadro K3000M physically cannot execute, such as hardware ray tracing or DirectX 12 Ultimate features. The 8 GB VRAM (4 times the K3000M's 2 GB) is essential for modern texture-heavy games and professional applications. The RX 9060 XT's 3130 MHz boost clock is nearly five times the Quadro's 654 MHz, and its 4 nm process delivers efficiency that the 28 nm Kepler node cannot approach. The launch MSRP for the RX 9060 XT is 299 USD. The Quadro K3000M, by contrast, is end-of-life with no MSRP listed in the data.
However, the Quadro K3000M retains a narrow relevance for legacy system maintenance. Its 75 W TDP, MXM module form factor, and 256-bit memory bus make it a drop-in replacement for old mobile workstations that require Kepler-era driver support. The 1.2% performance lead over the GeForce GTX 1050 Ti in its benchmark pool shows it can still handle basic OpenGL 4.6 workloads. But the data shows its 25th percentile ranking and 2012 release date mean it is strictly a legacy part. For any new purchase, the RX 9060 XT wins on every architectural metric except the single benchmark score, where the two are statistically tied. The verdict is clear: choose the RX 9060 XT for anything modern, and only consider the K3000M if you are repairing a specific vintage laptop with no other option.
FAQ
Q: Which GPU has higher raw compute performance?
A: The AMD Radeon RX 9060 XT 8 GB delivers 25.64 TFLOPS of FP32 compute, while the NVIDIA Quadro K3000M delivers 753.4 GFLOPS. The RX 9060 XT is approximately 34 times faster in raw FP32 throughput.
Q: How do their memory specifications compare?
A: The RX 9060 XT has 8 GB of GDDR6 memory on a 128-bit bus with 322.3 GB/s bandwidth. The Quadro K3000M has 2 GB of GDDR5 on a 256-bit bus with 89.60 GB/s bandwidth. The RX 9060 XT provides 3.6 times the bandwidth despite the narrower bus.
Q: What is the performance percentile ranking for each card?
A: The Quadro K3000M sits at the 25th percentile of all GPUs, while the RX 9060 XT sits at the 24th percentile. Both cards rank in the bottom quarter of the database.
Q: Does the RX 9060 XT support ray tracing?
A: Yes, the RX 9060 XT has 32 dedicated ray tracing cores and supports DirectX 12 Ultimate (12_2). The Quadro K3000M has no ray tracing cores and only supports DirectX 12 (11_0).
Q: What are the power requirements for each card?
A: The Quadro K3000M has a 75 W TDP and uses no external power connectors, drawing power solely through its MXM-B (3.0) interface. The RX 9060 XT has a 150 W TDP, uses a single 8-pin power connector, and requires a 450 W suggested power supply.
Q: Which card is still in production?
A: The AMD Radeon RX 9060 XT 8 GB is marked as "Active" in production status, while the NVIDIA Quadro K3000M is marked as "End-of-life." The RX 9060 XT was released on June 3, 2025, whereas the K3000M was released on May 31, 2012.