AMD Radeon RX 9060 XT 8 GB vs NVIDIA GeForce GT 740M Comparison
AMD Radeon RX 9060 XT 8 GB
GeForce GT 740M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT 8 GB vs NVIDIA GeForce GT 740M
The AMD Radeon RX 9060 XT 8 GB and NVIDIA GeForce GT 740M occupy entirely different eras of GPU design, and the benchmark data reflects a decisive generational gulf. The RX 9060 XT posts an average benchmark score of 4093, placing it in the 24th percentile of all GPUs, while the GT 740M averages 3717, sitting in the 22nd percentile. Although the percentile gap appears narrow, the underlying specifications and architecture tell a story of two products with no meaningful overlap in capability or intended use. The RX 9060 XT is an active, modern desktop part built for current gaming workloads, whereas the GT 740M is an end-of-life mobile chip designed for basic laptop duties over a decade ago.
Where Each One Wins
The data shows a clear split: the AMD Radeon RX 9060 XT 8 GB wins in every meaningful performance category, while the NVIDIA GeForce GT 740M wins only in power efficiency and legacy compatibility. The RX 9060 XT delivers a 3DMark Steel Nomad DX12 score of 4093, a test that the GT 740M cannot run due to its older DirectX feature level. The GT 740M's available benchmarks are Geekbench OpenCL and Vulkan, scoring 3974 and 3459 respectively, which measure compute and API overhead rather than modern gaming rasterization.
For gaming and content creation, the RX 9060 XT is the only viable option. Its 2048 shading units, 128 texture mapping units, and 64 ROPs dwarf the GT 740M's 384 shaders, 32 TMUs, and 8 ROPs. The RX 9060 XT also features 32 dedicated ray tracing cores, a hardware capability entirely absent from the GT 740M. The GT 740M's sole advantage is its 33 W TDP compared to the RX 9060 XT's 150 W, making it suitable for thin-and-light laptops where battery life and thermals matter more than frame rates. The GT 740M also uses an MXM module form factor with no power connectors, whereas the RX 9060 XT requires a dual-slot cooler and a single 8-pin power connector.
Architecture Differences
The architectural gap between these two GPUs spans nearly two full generations of design philosophy. The RX 9060 XT uses the Navi 44 chip built on RDNA 4.0 architecture with a 4 nm process at TSMC, while the GT 740M uses the GK208 chip on Kepler 2.0 architecture with a 28 nm process, also at TSMC. This process shrink alone explains a massive portion of the performance difference: the RX 9060 XT packs 29,700 million transistors onto a 199 mm² die, yielding a density of 149.2 million transistors per square millimeter. The GT 740M manages only 1,020 million transistors on an 87 mm² die, a density of 11.7 million per square millimeter — a 12.7x density advantage for the AMD part.
Clock speeds further separate the two. The RX 9060 XT runs a base clock of 1700 MHz, a game clock of 2530 MHz, and a boost clock of 3130 MHz. The GT 740M operates at a 980 MHz base and 1033 MHz boost. Memory configurations are equally divergent: the RX 9060 XT uses 8 GB of GDDR6 on a 128-bit bus with 322.3 GB/s bandwidth, while the GT 740M uses 2 GB of DDR3 on a 64-bit bus with just 14.40 GB/s bandwidth. The RX 9060 XT also supports PCIe 5.0 x16, whereas the GT 740M runs on PCIe 3.0 x8. API support differs as well, with the RX 9060 XT offering DirectX 12 Ultimate (12_2) and Vulkan 1.4, versus the GT 740M's DirectX 12 (11_0) and Vulkan 1.2.175.
Head-to-Head Benchmarks
Direct head-to-head benchmark comparisons are unavailable in the dataset, but the individual scores and nearest rival data provide a clear picture. The RX 9060 XT's 3DMark Steel Nomad score of 4093 places it 0.4% ahead of the Intel HD Graphics 630 (4075) and 1.5% ahead of the NVIDIA GeForce GT 755M (4033). It trails the NVIDIA Quadro K2100M (4151) by 1.4% and the AMD Radeon R5 M330 (4170) by 1.8%. These rivals are all older or lower-tier parts, indicating the RX 9060 XT sits in a performance tier that barely moves the needle against integrated graphics from several years ago — a surprising result for a modern discrete GPU.
The GT 740M's nearest rivals tell a similar story. Its average score of 3717 is essentially tied with the NVIDIA Quadro 3000M (3718, 0% delta), 0.6% ahead of the NVIDIA GeForce 825M (3694), and 1.9% ahead of the AMD Radeon HD 6770 (3649). It trails the NVIDIA GeForce GT 635M (3740) by 0.6%. Comparing the two directly using their average scores, the RX 9060 XT leads the GT 740M by 376 points, or approximately 10.1%. However, this cross-benchmark comparison is imperfect because the RX 9060 XT's score comes from a modern DX12 test while the GT 740M's comes from OpenCL and Vulkan compute workloads.
The raw compute figures are more illustrative. The RX 9060 XT delivers 25.64 TFLOPS of FP32 performance, while the GT 740M manages just 793.3 GFLOPS — a 32.3x advantage for the AMD card. Pixel fill rate is 200.3 GPixel/s versus 8.264 GPixel/s (24.2x), and texture fill rate is 400.6 GTexel/s versus 33.06 GTexel/s (12.1x). These ratios confirm that the RX 9060 XT is not merely faster but operates in a fundamentally different performance class.
The Verdict
The data supports only one conclusion for anyone building or buying a modern system: the AMD Radeon RX 9060 XT 8 GB is the clear choice for gaming, ray tracing, and compute-heavy workloads. Its 32.3x FP32 advantage, 8 GB of GDDR6 memory, and DirectX 12 Ultimate support make it a capable current-generation part, despite its modest 24th percentile standing among all GPUs. The 4 nm process, 3130 MHz boost clock, and 322.3 GB/s bandwidth position it as a mainstream desktop solution with a launch MSRP of 299 USD.
The NVIDIA GeForce GT 740M should only be considered for legacy laptop repairs or systems where the 33 W power draw is an absolute constraint. Its 2 GB DDR3 memory and 14.40 GB/s bandwidth are insufficient for any modern game, and its end-of-life production status means no future driver optimizations. The GT 740M's 22nd percentile ranking confirms it was never a high-performance part, even at its 2013 release. For any application requiring ray tracing, the GT 740M is immediately disqualified since it lacks dedicated RT cores. The RX 9060 XT's 32 RT cores provide hardware-accelerated ray tracing that the Kepler-based card cannot emulate.
FAQ
Q: Which GPU has higher raw compute performance?
A: The AMD Radeon RX 9060 XT delivers 25.64 TFLOPS of FP32 performance, compared to the NVIDIA GeForce GT 740M's 793.3 GFLOPS — a 32.3x advantage for the AMD part.
Q: Can the NVIDIA GeForce GT 740M run DirectX 12 Ultimate games?
A: No. The GT 740M supports DirectX 12 (11_0), which lacks the full 12_2 feature set. The RX 9060 XT supports DirectX 12 Ultimate (12_2) and also features 32 dedicated ray tracing cores, which the GT 740M does not have.
Q: What is the memory bandwidth difference?
A: The RX 9060 XT has 322.3 GB/s of bandwidth from 8 GB of GDDR6 on a 128-bit bus. The GT 740M has 14.40 GB/s from 2 GB of DDR3 on a 64-bit bus — a 22.4x difference in bandwidth.
Q: How do their average benchmark scores compare?
A: The RX 9060 XT averages 4093 across its tested benchmarks, while the GT 740M averages 3717. The RX 9060 XT is approximately 10.1% higher, though they run different benchmark suites.
Q: Which GPU is more power-efficient?
A: The GT 740M has a 33 W TDP and requires no power connectors, making it suitable for low-power laptops. The RX 9060 XT has a 150 W TDP and requires a single 8-pin power connector plus a 450 W suggested PSU.
Q: What are the production statuses of these GPUs?
A: The RX 9060 XT is listed as Active production, released on 2025-06-03. The GT 740M is End-of-life, released on 2013-06-19, with the GeForce 800M as its successor.
Specification Differences
| Specification | AMD Radeon RX 9060 XT 8 GB | NVIDIA GeForce GT 740M |
|---|---|---|
| Architecture | RDNA 4.0 | Kepler 2.0 |
| Process Node | 4 nm | 28 nm |
| Transistors | 29,700 million | 1,020 million |
| Die Size | 199 mm² | 87 mm² |
| Transistor Density | 149.2M / mm² | 11.7M / mm² |
| Base Clock | 1700 MHz | 980 MHz |
| Boost Clock | 3130 MHz | 1033 MHz |
| Game Clock | 2530 MHz | None |
| Memory Size | 8 GB | 2 GB |
| Memory Type | GDDR6 | DDR3 |
| Memory Bus Width | 128 bit | 64 bit |
| Memory Bandwidth | 322.3 GB/s | 14.40 GB/s |
| Shading Units | 2048 | 384 |
| TMUs | 128 | 32 |
| ROPs | 64 | 8 |
| RT Cores | 32 | None |
| Pixel Rate | 200.3 GPixel/s | 8.264 GPixel/s |
| Texture Rate | 400.6 GTexel/s | 33.06 GTexel/s |
| FP32 Performance | 25.64 TFLOPS | 793.3 GFLOPS |
| TDP | 150 W | 33 W |
| Slot Width | Dual-slot | MXM Module |
| Power Connectors | 1x 8-pin | None |
| Suggested PSU | 450 W | None |
| Bus Interface | PCIe 5.0 x16 | PCIe 3.0 x8 |
| DirectX Support | 12 Ultimate (12_2) | 12 (11_0) |
| Vulkan Support | 1.4 | 1.2.175 |
| Production Status | Active | End-of-life |
| Release Date | 2025-06-03 | 2013-06-19 |