AMD Radeon RX 9060 XT 8 GB vs NVIDIA GeForce 930M Comparison
AMD Radeon RX 9060 XT 8 GB
GeForce 930M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT 8 GB vs NVIDIA GeForce 930M
The data presents an extraordinary generational contrast: NVIDIA’s GeForce 930M, a 2015-era mobile entry chip built on 28 nm Maxwell, sits against AMD’s Radeon RX 9060 XT 8 GB, a 2025 desktop part on 4 nm RDNA 4.0. The benchmark results are surprisingly close in aggregate percentile terms — the 930M averages 4388, the RX 9060 XT 4093 — yet this masks a fundamental chasm in raw specifications, architecture, and intended use. The 930M is an end-of-life integrated-class part; the RX 9060 XT is an active, dual-slot, 150 W discrete GPU. This analysis will interpret the data strictly from the FACT PACK, questioning what these numbers mean for real-world selection.
The Verdict
Based strictly on the data, the NVIDIA GeForce 930M is the choice for users whose workload is limited to legacy OpenCL or Vulkan compute tasks on a portable device. Its Geekbench OpenCL score of 5046 and Vulkan score of 3729 come from a part that draws 33 W, requires no power connector, and is listed as an IGP (integrated graphics processor). It is end-of-life, but its 26th percentile rank among all GPUs is actually 2 percentile points higher than the RX 9060 XT’s 24th percentile. For a system that must run on battery or in a thin chassis, the 930M’s data profile is the only viable one.
The AMD Radeon RX 9060 XT 8 GB is the choice for any modern gaming or high-throughput workload. Its sole benchmark — 3DMark Steel Nomad DX12 — scores 4093, which is a DirectX 12 Ultimate test, a feature the 930M’s DirectX 12 (11_0) support cannot even fully access. The RX 9060 XT has 8 GB of GDDR6 memory, 322.3 GB/s bandwidth, 2048 shading units, and 32 ray tracing cores. The 930M has 2 GB of DDR3, 12.80 GB/s bandwidth, 384 shading units, and zero RT cores. If the task requires ray tracing, modern API features, or high-resolution textures, the 930M is disqualified by the data alone. The verdict is not about speed — it is about capability. The 930M wins on legacy compute and portability; the RX 9060 XT wins on everything modern, despite its lower aggregate benchmark percentile.
Architecture Differences
The architectural gap is the story. The 930M uses the GM108S chip on Maxwell architecture, built on a 28 nm process at TSMC. It packs 1,020 million transistors into a 77 mm² die, yielding a density of 13.2M / mm². This is a low-power design with a 549 MHz base and boost clock — identical clocks, suggesting no dynamic headroom. The RX 9060 XT uses the Navi 44 chip under RDNA 4.0 architecture, codenamed Strix Point, on a 4 nm process, also TSMC. It contains 29,700 million transistors on a 199 mm² die, achieving 149.2M / mm² density — over 11 times the transistor density. The RX 9060 XT’s base clock is 1700 MHz, boosting to 3130 MHz, with a game clock of 2530 MHz.
The memory architecture differs fundamentally. The 930M uses DDR3 on a 64-bit bus, delivering 12.80 GB/s bandwidth. The RX 9060 XT uses GDDR6 on a 128-bit bus, delivering 322.3 GB/s — a 25-fold increase. The 930M has 384 shading units, 24 TMUs, and 8 ROPs, while the RX 9060 XT has 2048 shading units, 128 TMUs, and 64 ROPs. The RX 9060 XT also includes 32 RT cores; the 930M has none. Feature support diverges: the 930M supports Vulkan 1.4 and DirectX 12 (11_0), while the RX 9060 XT supports DirectX 12 Ultimate (12_2). Both support OpenGL 4.6. The RX 9060 XT uses PCIe 5.0 x16; the 930M uses PCIe 3.0 x8.
Head-to-Head Benchmarks
The FACT PACK lists no direct head-to-head benchmark results between these two GPUs. However, the available scores reveal a nuanced picture. The 930M’s Geekbench OpenCL score is 5046, and its Geekbench Vulkan score is 3729. The RX 9060 XT’s only score is 4093 on 3DMark Steel Nomad DX12. These are not comparable tests — OpenCL and Vulkan are cross-API compute tests, while Steel Nomad is a DirectX 12 gaming workload. The data does not allow a direct speed comparison.
Instead, the nearestRivals data provides context. The 930M’s average score of 4388 places it 0.5% ahead of the NVIDIA GeForce GT 645M (4411) and 0.7% behind the Intel Iris Pro Graphics 5200 (4360). It is 1.2% ahead of the NVIDIA GeForce RTX 4070 GDDR6 (4335) and 2.2% ahead of the AMD FirePro W2100 (4295). This is a bizarre cluster — a 2015 IGP matching a modern RTX 4070 in average score suggests the benchmark pool is dominated by legacy tests. The RX 9060 XT’s average of 4093 places it 0.4% ahead of Intel HD Graphics 630 (4075) and 1.5% ahead of NVIDIA GeForce GT 755M (4033), but 1.4% behind NVIDIA Quadro K2100M (4151) and 1.8% behind AMD Radeon R5 M330 (4170). The RX 9060 XT’s rivals are all ancient or low-end parts, indicating its single benchmark score may not reflect its true capability in modern workloads.
The biggest win for the 930M is its Geekbench OpenCL score of 5046, which is 23% higher than its own Vulkan score of 3729. The biggest win for the RX 9060 XT is its 3DMark Steel Nomad DX12 score of 4093, a test the 930M cannot run due to its lower DirectX feature level. The data implies the 930M excels at legacy compute, while the RX 9060 XT is designed for modern rasterization and ray tracing.
Specification Differences
The two GPUs differ in nearly every measurable field. Process node: 28 nm vs 4 nm. Transistors: 1,020 million vs 29,700 million. Die size: 77 mm² vs 199 mm². Base clock: 549 MHz vs 1700 MHz. Boost clock: 549 MHz vs 3130 MHz. Memory size: 2 GB vs 8 GB. Memory type: DDR3 vs GDDR6. Bus width: 64-bit vs 128-bit. Bandwidth: 12.80 GB/s vs 322.3 GB/s. Shading units: 384 vs 2048. TMUs: 24 vs 128. ROPs: 8 vs 64. RT cores: none vs 32. Pixel rate: 4.392 GPixel/s vs 200.3 GPixel/s. Texture rate: 13.18 GTexel/s vs 400.6 GTexel/s. FP32: 421.6 GFLOPS vs 25.64 TFLOPS. FP16: null vs 25.64 TFLOPS (1:1). TDP: 33 W vs 150 W. Slot width: IGP vs Dual-slot. Power connectors: None vs 1x 8-pin. Suggested PSU: null vs 450 W. Bus interface: PCIe 3.0 x8 vs PCIe 5.0 x16. Display outputs: Portable Device Dependent vs 1x HDMI 2.1b, 2x DisplayPort 2.1a. DirectX: 12 (11_0) vs 12 Ultimate (12_2). Release date: 2015-03-12 vs 2025-06-03. Production status: End-of-life vs Active. Launch MSRP: null vs 299 USD (stated once as launch MSRP).
FAQ
Q: Which GPU has a higher average benchmark score?
A: The NVIDIA GeForce 930M has an average benchmark score of 4388, which is higher than the AMD Radeon RX 9060 XT 8 GB’s average of 4093. The 930M also ranks at the 26th percentile among all GPUs, versus the RX 9060 XT’s 24th percentile.
Q: Can the RX 9060 XT run the same benchmarks as the 930M?
A: The data does not show overlapping tests. The 930M has Geekbench OpenCL and Vulkan scores, while the RX 9060 XT has only a 3DMark Steel Nomad DX12 score. The RX 9060 XT supports DirectX 12 Ultimate (12_2), while the 930M only supports DirectX 12 (11_0), so the 3DMark test is likely incompatible with the older GPU.
Q: What is the memory bandwidth difference?
A: The 930M has a memory bandwidth of 12.80 GB/s using 2 GB of DDR3 on a 64-bit bus. The RX 9060 XT has 322.3 GB/s using 8 GB of GDDR6 on a 128-bit bus. This is a 25-fold increase in bandwidth.
Q: Which GPU has ray tracing support?
A: Only the AMD Radeon RX 9060 XT 8 GB has ray tracing cores, with 32 RT cores listed. The NVIDIA GeForce 930M has no RT cores listed.
Q: What are the power requirements?
A: The 930M has a TDP of 33 W and requires no power connector, listed as an IGP. The RX 9060 XT has a TDP of 150 W, requires a single 8-pin power connector, and has a suggested PSU of 450 W.
Q: What is the release date gap?
A: The 930M was released on 2015-03-12 and is end-of-life. The RX 9060 XT was released on 2025-06-03 and is active production. The launch MSRP for the RX 9060 XT is 299 USD.
Where Each One Wins
The NVIDIA GeForce 930M wins in scenarios defined by low power and portability. Its 33 W TDP, IGP form factor, and lack of power connectors make it suitable for thin-and-light laptops. Its Geekbench OpenCL score of 5046 is its strongest result, suggesting it handles legacy compute workloads better than its Vulkan score of 3729. The 930M’s nearest rival, the GT 645M, is only 0.5% behind, while it is 1.2% ahead of an RTX 4070 GDDR6 — indicating that in the specific benchmark pool it occupies, it holds its own. For users running OpenCL-based acceleration on older software, the data supports the 930M.
The AMD Radeon RX 9060 XT 8 GB wins decisively in modern gaming and high-end rendering. Its 3DMark Steel Nomad DX12 score of 4093 is a DirectX 12 Ultimate workload, which the 930M cannot execute. The RX 9060 XT’s 8 GB GDDR6 memory and 322.3 GB/s bandwidth enable high-resolution textures; its 32 RT cores enable ray tracing; its 25.64 TFLOPS FP32 is 61 times the 930M’s 421.6 GFLOPS. Its pixel rate of 200.3 GPixel/s versus 4.392 GPixel/s means it can drive high refresh rates. The RX 9060 XT’s nearest rivals are all low-end or old (HD Graphics 630, GT 755M), which is a data artifact of having only one benchmark score, but that score is in a modern API. For any DirectX 12 Ultimate game, the RX 9060 XT is the only option between the two. The 930M wins on legacy compute and power efficiency; the RX 9060 XT wins on every modern performance metric.