AMD Radeon RX 9060 XT 16 GB vs NVIDIA GeForce 930M Comparison

AMD
RADEON

AMD Radeon RX 9060 XT 16 GB

CORE STATE Navi 44
VRAM 16 GB
CLOCK SPEED 3130 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

GeForce 930M

CORE STATE GM108S
VRAM 2 GB
CLOCK SPEED 549 MHz
TDP 33 W
BUS WIDTH 64 bit
ARCHITECTURE Maxwell
nm
PROCESS 28 nm
LAUNCH DATE 2015

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
4,093
N/A
passmark_directx_10
116
N/A
passmark_directx_11
185
N/A
passmark_directx_12
57
N/A
passmark_directx_9
305
N/A
passmark_g2d
1,169
N/A
passmark_g3d
20,099
N/A
passmark_gpu_compute
11,234
N/A
geekbench_opencl
N/A
5,046
geekbench_vulkan
N/A
3,729

Analysis: AMD Radeon RX 9060 XT 16 GB vs NVIDIA GeForce 930M

AMD Radeon RX 9060 XT 16 GB and NVIDIA GeForce 930M occupy entirely different tiers of the graphics hardware spectrum, separated by a decade of architectural evolution and a massive performance gulf. The data confirms that the RX 9060 XT is a modern discrete desktop solution, while the 930M is a legacy mobile chip from 2015. Benchmark results show the RX 9060 XT delivers dramatically higher raw performance, with an average benchmark score of 4657 compared to the 930M’s 4388, though these averages are drawn from different test suites. The RX 9060 XT’s percentile ranking of 27 places it above the 930M’s 26th percentile among all GPUs, and its nearest rivals include the NVIDIA GTX 970M and Quadro M3000M, whereas the 930M competes with much older parts like the GT 645M and Intel Iris Pro 5200.

Head-to-Head Benchmarks

The two cards share no common benchmark entries in the data, so direct score-for-score comparisons are impossible. Instead, the available metrics reveal the scale of the performance disparity. The RX 9060 XT achieves a Passmark G3D score of 20099, while the 930M has no Passmark entry at all; instead, the 930M’s strongest result is a Geekbench OpenCL score of 5046. In compute workloads, the RX 9060 XT posts a Passmark GPU Compute score of 11234, a figure that dwarfs any output the 930M could produce based on its architecture. The RX 9060 XT’s 3DMark Steel Nomad DX12 score of 4093 further demonstrates its modern rendering capability, a test the 930M cannot run given its lack of DirectX 12 Ultimate support.

Looking at the rival deltas, the RX 9060 XT’s average score of 4657 is essentially tied with the AMD Radeon R5 M320 (0% delta) and slightly ahead of the NVIDIA Quadro M3000M (0.8%). The 930M’s average of 4388 sits 0.7% above the Intel Iris Pro 5200 and 2.2% above the AMD FirePro W2100, but it trails the GT 645M by 0.5%. These figures place the 930M in the same performance neighborhood as integrated graphics from nearly a decade prior, while the RX 9060 XT aligns with mid-range discrete GPUs from the GTX 900M era. The FP32 compute rates tell the starkest story: the RX 9060 XT delivers 25.64 TFLOPS against the 930M’s 421.6 GFLOPS, a roughly 60-fold advantage in theoretical peak throughput.

Architecture Differences

The RX 9060 XT is built on TSMC’s 4 nm process with the Navi 44 chip, part of the RDNA 4.0 architecture and the Navi IV (RX 9000) generation. The 930M uses a 28 nm process with the GM108S chip, based on the Maxwell architecture from the GeForce 900M generation. Transistor counts differ enormously: the RX 9060 XT packs 29,700 million transistors on a 199 mm² die, yielding a density of 149.2M per mm², while the 930M contains just 1,020 million transistors on a 77 mm² die at 13.2M per mm². This fabrication gap explains why the RX 9060 XT can sustain a boost clock of 3130 MHz and a game clock of 2530 MHz, compared to the 930M’s fixed 549 MHz boost.

Memory subsystems are equally divergent. The RX 9060 XT features 16 GB of GDDR6 on a 128-bit bus, delivering 322.3 GB/s of bandwidth, whereas the 930M has 2 GB of DDR3 on a 64-bit bus at 12.80 GB/s. The RX 9060 XT’s 2048 shading units, 128 TMUs, and 64 ROPs dwarf the 930M’s 384 shading units, 24 TMUs, and 8 ROPs. Ray tracing is exclusive to the RX 9060 XT, which includes 32 dedicated RT cores; the 930M has none. API support also differs: the RX 9060 XT reaches DirectX 12 Ultimate (12_2), while the 930M is limited to DirectX 12 (11_0). Both support OpenGL 4.6 and Vulkan 1.4, but the RX 9060 XT’s pixel rate of 200.3 GPixel/s and texture rate of 400.6 GTexel/s vastly exceed the 930M’s 4.392 GPixel/s and 13.18 GTexel/s.

Where Each One Wins

The RX 9060 XT wins decisively in every measurable performance category. Its 16 GB memory capacity and 322.3 GB/s bandwidth make it suitable for modern high-resolution textures and data-intensive workloads, while its 32 RT cores enable hardware-accelerated ray tracing that the 930M cannot perform at all. The card’s PCIe 5.0 x16 interface and dual-slot design with a single 8-pin power connector position it for desktop builds with a suggested 450 W PSU. Display outputs include 1x HDMI 2.1b and 2x DisplayPort 2.1a, supporting contemporary monitors and high refresh rates.

The 930M’s only advantages are its power efficiency and physical footprint. With a 33 W TDP and IGP slot width, it requires no power connectors and is described as “Portable Device Dependent” for display outputs, making it a low-power solution for thin laptops from 2015. Its 2 GB DDR3 memory and 64-bit bus are adequate for basic 2D tasks and legacy DirectX 9/10 games, as indicated by the Passmark DirectX 9 score of 305 for the RX 9060 XT (the 930M has no such score). The 930M’s Geekbench Vulkan score of 3729 shows it can run modern APIs at low settings, but its 549 MHz clock and 421.6 GFLOPS FP32 rate severely limit compute potential.

The Verdict

The data leaves no ambiguity: the AMD Radeon RX 9060 XT 16 GB is the superior product for any workload involving 3D rendering, compute, or modern gaming. Its 25.64 TFLOPS FP32 performance, 16 GB GDDR6 memory, and ray tracing support place it in a completely different class than the NVIDIA GeForce 930M. The RX 9060 XT’s active production status and release date of June 2025 contrast with the 930M’s end-of-life status from March 2015. For users building a desktop PC with a 450 W PSU and PCIe 5.0 slot, the RX 9060 XT is the only viable choice. The 930M, with its 33 W TDP and no power connectors, remains relevant only for vintage laptop repairs or systems requiring minimal power draw. The 930M’s nearest rivals include the Intel Iris Pro 5200 and AMD FirePro W2100, confirming its position as an entry-level integrated-class GPU. The RX 9060 XT’s nearest rivals are the GTX 970M and Quadro M3000M, which are themselves older mobile parts, yet the RX 9060 XT still edges them out in average score.

FAQ

Q: How much faster is the RX 9060 XT in compute performance?

A: The RX 9060 XT delivers 25.64 TFLOPS FP32, while the 930M provides 421.6 GFLOPS, a difference of roughly 60 times in theoretical peak throughput.

Q: Does the 930M support ray tracing?

A: No. The RX 9060 XT includes 32 RT cores, but the 930M has no RT cores listed, making hardware ray tracing impossible on the older card.

Q: What memory configurations do these cards use?

A: The RX 9060 XT uses 16 GB of GDDR6 on a 128-bit bus with 322.3 GB/s bandwidth. The 930M uses 2 GB of DDR3 on a 64-bit bus with 12.80 GB/s bandwidth.

Q: Which card has better DirectX support?

A: The RX 9060 XT supports DirectX 12 Ultimate (12_2), while the 930M is limited to DirectX 12 (11_0). Both cards support OpenGL 4.6 and Vulkan 1.4.

Q: What are the power requirements for each card?

A: The RX 9060 XT has a 160 W TDP, requires a single 8-pin power connector, and needs a 450 W suggested PSU. The 930M has a 33 W TDP and requires no power connectors.

Q: How do the average benchmark scores compare?

A: The RX 9060 XT has an average benchmark score of 4657, while the 930M scores 4388. The RX 9060 XT ranks in the 27th percentile of all GPUs, versus the 930M’s 26th percentile.

Specification Differences

The two cards differ in nearly every hardware specification. The RX 9060 XT uses a 4 nm TSMC process with 29,700 million transistors on a 199 mm² die, while the 930M uses 28 nm with 1,020 million transistors on a 77 mm² die. Clocks are starkly different: the RX 9060 XT runs at 1700 MHz base, 3130 MHz boost, and 2530 MHz game clock, while the 930M is locked at 549 MHz base and boost. Memory differs in size (16 GB vs 2 GB), type (GDDR6 vs DDR3), bus width (128-bit vs 64-bit), and bandwidth (322.3 GB/s vs 12.80 GB/s). The RX 9060 XT has 2048 shading units, 128 TMUs, 64 ROPs, and 32 RT cores; the 930M has 384 shading units, 24 TMUs, and 8 ROPs with no RT cores. Pixel rate is 200.3 GPixel/s versus 4.392 GPixel/s, and texture rate is 400.6 GTexel/s versus 13.18 GTexel/s. TDP is 160 W versus 33 W, and the RX 9060 XT uses a dual-slot design with PCIe 5.0 x16, while the 930M is an IGP with PCIe 3.0 x8. Display outputs are 1x HDMI 2.1b and 2x DisplayPort 2.1a for the RX 9060 XT, versus portable-device-dependent for the 930M. The RX 9060 XT is active with a launch MSRP of 349 USD, while the 930M is end-of-life with no MSRP.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 9060 XT 16 GB
930M
Core Specs
Shading Units
2,048
384 -81.3%
Shaders
2,048
384 -81.3%
TMUs
128
24 -81.3%
ROPs
64
8 -87.5%
Compute Units
32
—
Clocks
Base Clock
1700 MHz
549 MHz
Boost Clock
3130 MHz
549 MHz
Game Clock
2530 MHz
—
Memory Clock
2518 MHz 20.1 Gbps effective
800 MHz 1600 Mbps effective
Memory
Memory Size
16 GB
2 GB
VRAM (MB)
16,384
2,048 -87.5%
Memory Type
GDDR6
DDR3
Memory Bus
128 bit
64 bit
Bandwidth
322.3 GB/s
12.80 GB/s
Cache
L1 Cache
—
64 KB (per SMM)
L2 Cache
4 MB
1024 KB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
200.3 GPixel/s
4.392 GPixel/s
Texture Rate
400.6 GTexel/s
13.18 GTexel/s
FP32 (TFLOPS)
25.64 TFLOPS
421.6 GFLOPS
FP64 (TFLOPS)
801.3 GFLOPS (1:32)
13.18 GFLOPS (1:32)
FP16 (TFLOPS)
25.64 TFLOPS (1:1)
—
AI/RT
RT Cores
32
—
Matrix Cores
64
—
Power
TDP
160 W
33 W
TDP (W)
160
33 -79.4%
Suggested PSU
450 W
—
Power Connectors
1x 8-pin
None
Architecture
Architecture
RDNA 4.0
Maxwell
GPU Name
Navi 44
GM108S
Codename
Strix Point
—
Generation
Navi IV (RX 9000)
GeForce 900M
Process Size
4 nm
28 nm
Transistors
29,700 million
1,020 million
Die Size
199 mm²
77 mm²
Foundry
TSMC
TSMC
Density
149.2M / mm²
13.2M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (11_0)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
5.0
Shader Model
6.9
6.7 (5.1)
Physical
Slot Width
Dual-slot
IGP
Outputs
1x HDMI 2.1b2x DisplayPort 2.1a
Portable Device Dependent
Bus Interface
PCIe 5.0 x16
PCIe 3.0 x8
Other
Launch Price
349 USD
—
Production
Active
End-of-life
Predecessor
Navi III
GeForce 800M
Successor
—
GeForce 10 Mobile
View Radeon RX 9060 XT 16 GB Details View GeForce 930M Details