AMD Radeon RX 7400 vs NVIDIA GeForce GTX 860M Comparison
AMD Radeon RX 7400
GeForce GTX 860M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7400 vs NVIDIA GeForce GTX 860M
The NVIDIA GeForce GTX 860M and the AMD Radeon RX 7400 represent two distinct eras of mobile and desktop graphics, separated by over a decade of architectural evolution. The benchmark data shows a decisive performance gap, with the AMD Radeon RX 7400 winning all seven head-to-head comparisons by wide margins. However, the analysis is more nuanced than a simple scoreboard, as the GTX 860M’s legacy as a laptop part and the RX 7400’s modern desktop focus create different use-case profiles that extend beyond raw frame rates.
Head-to-Head Benchmarks
The head-to-head results are uniformly lopsided, with the AMD Radeon RX 7400 securing a clean sweep across every tested workload. The largest single-test differential occurs in the PassMark G2D test, where the RX 7400 scores 1209 against the GTX 860M’s 226, representing an 81.3% advantage for the AMD part. This is not merely a 3D rendering gap; it indicates a fundamental difference in general-purpose 2D and compute performance that permeates the entire benchmark suite.
In DirectX 11, the most common gaming API for the GTX 860M’s era, the RX 7400 posts a score of 97 versus 23, a 76.3% lead. The gap narrows slightly in DirectX 10 (74.6% delta) and DirectX 9 (68.7% delta), but the pattern remains consistent: the newer architecture scales its advantage across all legacy API levels. The DirectX 12 comparison shows a 70.5% margin (44 vs. 13), which is notable because the RX 7400’s RDNA 3.0 architecture is designed for modern APIs, yet it still dominates the older Kepler part even in the API where the GTX 860M might theoretically be less penalized by its older feature set.
The 3DMark Steel Nomad DX12 test, exclusive to the RX 7400, yields a score of 1103, providing a modern benchmark reference that the GTX 860M cannot participate in due to its lack of support for that workload. The PassMark G3D score tells the most comprehensive story: the RX 7400 achieves 11897 versus 3081, a 74.1% differential that places the two cards in entirely different performance tiers. Finally, the GPU compute test shows a 75.7% gap (5152 vs. 1251), confirming that the AMD part’s advantage extends beyond graphics into general-purpose parallel processing.
Where Each One Wins
The AMD Radeon RX 7400 wins in every measurable category, but the nature of those wins varies by workload. In pure rasterization performance, as measured by PassMark G3D and the DirectX 9/10/11 tests, the RX 7400’s lead is substantial and consistent, ranging from 68.7% to 76.3%. This suggests it is the clear choice for any gaming scenario, whether running modern titles or revisiting older classics, as the architectural improvements in texture throughput and pixel fill rate translate directly to higher frame rates.
The RX 7400 also dominates in compute-oriented tasks, as evidenced by its 5152 GPU compute score. This makes it suitable for GPU-accelerated workflows beyond gaming, such as video encoding or physics simulations, where the GTX 860M’s 1251 score would be a bottleneck. The 2D performance differential (1209 vs. 226) further cements the RX 7400 as a more responsive desktop part for everyday UI rendering and image manipulation.
For the GTX 860M, there is no benchmark category where it emerges victorious. Its only qualitative advantage lies in its physical characteristics: it is an IGP (integrated graphics processor) form factor with no power connectors and a 75 W TDP, making it suitable for thin-and-light laptops. The RX 7400, by contrast, is a dual-slot desktop card requiring a 1x 6-pin power connector and a 200 W suggested PSU. Thus, the GTX 860M’s “win” is in deployment flexibility within legacy mobile platforms, not in performance.
Architecture Differences
The architectural chasm between these two parts explains the benchmark disparity. The GTX 860M uses NVIDIA’s Kepler architecture (chip GK104), built on a 28 nm TSMC process with 3,540 million transistors on a 294 mm² die. This yields a transistor density of 12.0M per mm². The RX 7400 uses AMD’s RDNA 3.0 architecture (chip Navi 33, codename Hotpink Bonefish), fabricated on a 6 nm TSMC process with 13,300 million transistors packed into a smaller 204 mm² die, achieving a density of 65.2M per mm². This represents a fundamental shift in manufacturing efficiency, with the RX 7400 fitting nearly four times more transistors into a smaller area.
Clock speeds tell a similar story. The GTX 860M has a base clock of 797 MHz and a boost of 915 MHz, while the RX 7400 operates at a 1452 MHz base and 2300 MHz boost, with a 2200 MHz game clock. The RX 7400’s memory is also vastly superior: 8 GB of GDDR6 running at 18 Gbps effective on a 128-bit bus yields 288.0 GB/s of bandwidth, versus the GTX 860M’s 2 GB of GDDR5 at 5 Gbps effective on the same 128-bit bus, providing only 80.00 GB/s.
The compute resources are heavily skewed toward the AMD part. The RX 7400 has 1792 shading units, 112 TMUs, and 64 ROPs, compared to the GTX 860M’s 1152 shading units, 96 TMUs, and 16 ROPs. Critically, the RX 7400 includes 28 ray tracing cores, a feature entirely absent from the Kepler architecture. This enables hardware-accelerated ray tracing, which the GTX 860M cannot perform. The pixel rate (147.2 GPixel/s vs. 21.96 GPixel/s) and texture rate (257.6 GTexel/s vs. 87.84 GTexel/s) show the RX 7400’s advantage in fill-rate-bound scenarios.
FP32 throughput is 16.49 TFLOPS for the RX 7400 versus 2.108 TFLOPS for the GTX 860M, a nearly eightfold increase. The RX 7400 also supports FP16 at 32.97 TFLOPS (2:1 ratio), which the GTX 860M lacks entirely. API support differs as well: the RX 7400 supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the GTX 860M is limited to DirectX 12 (11_0) and Vulkan 1.2.175. The memory bus is identical (128-bit), but the RX 7400 uses PCIe 4.0 x8 versus the GTX 860M’s PCIe 3.0 x16. The RX 7400 also offers modern display outputs (1x HDMI 2.1a, 3x DisplayPort 2.1), whereas the GTX 860M’s outputs are portable-device dependent.
FAQ
Q: Which GPU has higher raw compute performance?
A: The AMD Radeon RX 7400 achieves 16.49 TFLOPS of FP32 performance, while the NVIDIA GeForce GTX 860M delivers 2.108 TFLOPS. This represents a roughly 7.8x advantage for the RX 7400.
Q: Does the GTX 860M support hardware ray tracing?
A: No. The GTX 860M’s Kepler architecture has no ray tracing cores, while the RX 7400 includes 28 such cores, enabling hardware-accelerated ray tracing workloads.
Q: How do their memory bandwidth figures compare?
A: The RX 7400 has 288.0 GB/s of bandwidth from 8 GB of GDDR6 on a 128-bit bus, versus the GTX 860M’s 80.00 GB/s from 2 GB of GDDR5 on the same 128-bit bus width.
Q: What is the power consumption difference?
A: The GTX 860M has a TDP of 75 W and requires no power connectors (it is an IGP), whereas the RX 7400 has a 43 W TDP but requires a 1x 6-pin power connector and a 200 W suggested PSU.
Q: Which GPU has a higher PassMark G3D score?
A: The RX 7400 scores 11897, compared to the GTX 860M’s 3081. The RX 7400 is 74.1% faster in this test, which is a strong indicator of overall 3D rendering performance.
Q: Are there any benchmarks where the GTX 860M wins?
A: No. Across all seven head-to-head benchmark comparisons, the AMD Radeon RX 7400 wins every single test, with deltas ranging from 68.7% to 81.3% in its favor.
The Verdict
The data unequivocally favors the AMD Radeon RX 7400 for any performance-oriented task. Its 7-0 head-to-head sweep, combined with massive leads in every architectural metric—from 16.49 TFLOPS FP32 to 288.0 GB/s bandwidth—makes it the superior choice for gaming, compute, and modern API support. The RX 7400’s 11897 PassMark G3D score places it in a different performance class than the GTX 860M’s 3081, and its ray tracing capabilities and DirectX 12 Ultimate support future-proof it for upcoming titles.
The NVIDIA GeForce GTX 860M is not without merit, but its merits lie outside performance. As an end-of-life mobile part from 2014, it fills a specific niche: upgrading or repairing legacy laptops where the 75 W TDP and IGP form factor are mandatory constraints. Its 2 GB of GDDR5 and 80.00 GB/s bandwidth are adequate for very old or low-resolution gaming, but its 19th percentile ranking among all GPUs and its average benchmark score of 2967 (versus the RX 7400’s 2467 average, though this is skewed by different test sets) reflect its age.
The RX 7400’s 17th percentile ranking (which appears lower due to the inclusion of modern high-end parts in the database) does not undermine its dominance here. Its nearest rivals include the AMD Radeon 8040S (deltaPct 1.1) and NVIDIA GeForce 710M (deltaPct 1.4), showing it sits in a specific performance tier. For any user with a desktop platform that can accommodate a dual-slot card with a 6-pin connector, the RX 7400 is the only rational choice based on this data. The GTX 860M should be reserved exclusively for mobile systems where its low power draw and lack of external power requirements are non-negotiable.