AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5090 Comparison
AMD Radeon RX 7400 OEM
GeForce RTX 5090
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5090
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark entries for the AMD Radeon RX 7400 OEM against the NVIDIA GeForce RTX 5090. The RX 7400 OEM has no recorded benchmark scores, no average score, and no nearest rivals listed. The RTX 5090, by contrast, has ten recorded benchmark scores across multiple test suites, an average benchmark score of 79,842, and a percentile rank of 92 among all GPUs.
The RTX 5090’s recorded results show a wide spread across different DirectX versions. In PassMark DirectX 10, it scores 226; in DirectX 11, it scores 341; in DirectX 12, it scores 185; and in DirectX 9, it scores 395. These scores are not directly comparable to each other due to different rendering paths, but they indicate that the card’s performance varies significantly by API generation. The PassMark G3D score of 39,650 and GPU compute score of 26,756 provide broader measures of graphics and compute throughput. In Geekbench, the OpenCL score reaches 334,370 and the Vulkan score reaches 376,728, showing strong compute and cross-platform API performance. The 3DMark Steel Nomad DX12 score of 18,355 represents a modern, demanding workload.
Because the RX 7400 OEM has no benchmark entries, the data cannot quantify any performance gap between the two cards. The RTX 5090’s percentile rank of 92 places it above most recorded GPUs, while the RX 7400 OEM sits at the 50th percentile with an average score of zero, which reflects the absence of recorded measurements rather than actual performance. The nearest rivals for the RTX 5090 provide context: the NVIDIA Tesla P100 PCIe 16 GB scores 79,605, which is 0.3% lower; the Tesla P100 PCIe 12 GB scores 79,396, 0.6% lower; the AMD Radeon RX 6850M XT scores 78,940, 1.1% lower; and the AMD Radeon Pro Vega 64X scores 80,959, which is 1.4% higher. These deltas are small, indicating that the RTX 5090 sits in a tightly clustered performance band at the top of the database. No such context exists for the RX 7400 OEM.
Architecture Differences
The two cards come from entirely different design lineages. The AMD Radeon RX 7400 OEM uses the Navi 33 chip, built on RDNA 3.0 architecture, with the codename Hotpink Bonefish, and belongs to the Navi III (RX 7000) generation. It is fabricated on a 6 nm process at TSMC, with 13,300 million transistors on a 204 mm² die, yielding a transistor density of 65.2 million per square millimeter. The NVIDIA GeForce RTX 5090 uses the GB202 chip, built on Blackwell 2.0 architecture, and belongs to the GeForce 50 generation. It is fabricated on a 5 nm process at TSMC, with 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per square millimeter. The RTX 5090 packs nearly seven times more transistors onto a die that is more than three and a half times larger, with roughly double the transistor density.
The compute configurations differ dramatically. The RX 7400 OEM has 1,792 shading units, 112 texture mapping units, 64 raster output units, and 28 ray tracing cores. It has no tensor cores listed. The RTX 5090 has 21,760 shading units, 680 texture mapping units, 176 raster output units, 170 ray tracing cores, and 680 tensor cores. That means the RTX 5090 has over twelve times more shading units, over six times more TMUs, and over six times more RT cores. The RX 7400 OEM’s FP32 throughput is 7.885 TFLOPS, and its FP16 throughput is also 7.885 TFLOPS at a 1:1 ratio. The RTX 5090’s FP32 throughput is 104.8 TFLOPS, with FP16 also at 104.8 TFLOPS at 1:1. The RTX 5090 delivers roughly 13.3 times the floating-point throughput in both precision formats.
Clock speeds also diverge. The RX 7400 OEM has a base clock of 330 MHz and a boost clock of 1100 MHz. The RTX 5090 has a base clock of 2017 MHz and a boost clock of 2407 MHz. The RTX 5090’s base clock is more than six times higher than the RX 7400 OEM’s base clock, and its boost clock is more than double. Memory architecture follows the same pattern: the RX 7400 OEM uses 8 GB of GDDR6 on a 128-bit bus, with memory clocked at 1350 MHz (10.8 Gbps effective) and bandwidth of 172.8 GB/s. The RTX 5090 uses 32 GB of GDDR7 on a 512-bit bus, with memory clocked at 1750 MHz (28 Gbps effective) and bandwidth of 1.79 TB/s. The RTX 5090 has four times the memory capacity, four times the bus width, and roughly 10.4 times the memory bandwidth.
Pixel and texture rates reflect these differences. The RX 7400 OEM achieves 70.40 GPixel/s and 123.2 GTexel/s. The RTX 5090 achieves 423.6 GPixel/s and 1,636.8 GTexel/s. The RTX 5090 is about six times faster in pixel fill and over thirteen times faster in texture fill. Power envelopes are also far apart: the RX 7400 OEM has a TDP of 55 W, while the RTX 5090 has a TDP of 575 W. The RTX 5090 draws more than ten times the power. The RX 7400 OEM uses a single 6-pin power connector and recommends a 250 W PSU, while the RTX 5090 uses a single 16-pin connector and recommends a 950 W PSU. The RX 7400 OEM is a single-slot card, 167 mm long, while the RTX 5090 is a dual-slot card, 304 mm long, 137 mm tall, and 40 mm wide.
The bus interfaces differ as well: the RX 7400 OEM uses PCIe 4.0 x8, while the RTX 5090 uses PCIe 5.0 x16. Display outputs are similar in count but differ in version: the RX 7400 OEM has one HDMI 2.1a and three DisplayPort 2.1, while the RTX 5090 has one HDMI 2.1b and three DisplayPort 2.1b. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
FAQ
Q: Which card has a higher boost clock?
A: The RTX 5090 has a boost clock of 2407 MHz, while the RX 7400 OEM has a boost clock of 1100 MHz. The RTX 5090’s boost clock is more than double.
Q: How much memory bandwidth does each card provide?
A: The RX 7400 OEM provides 172.8 GB/s of bandwidth from 8 GB of GDDR6 on a 128-bit bus. The RTX 5090 provides 1.79 TB/s of bandwidth from 32 GB of GDDR7 on a 512-bit bus.
Q: What is the power requirement difference?
A: The RX 7400 OEM has a TDP of 55 W and a suggested PSU of 250 W. The RTX 5090 has a TDP of 575 W and a suggested PSU of 950 W.
Q: Does the RX 7400 OEM have tensor cores?
A: No tensor cores are listed for the RX 7400 OEM. The RTX 5090 has 680 tensor cores.
Q: What is the RTX 5090’s average benchmark score and percentile?
A: The RTX 5090 has an average benchmark score of 79,842 and sits at the 92nd percentile among all GPUs in the database.
Q: What is the difference in transistor count?
A: The RX 7400 OEM has 13,300 million transistors, while the RTX 5090 has 92,200 million transistors. The RTX 5090 contains roughly seven times more transistors.
The Verdict
The recorded data shows an extreme asymmetry between these two products. The RTX 5090 is a fully measured card with ten benchmark scores, a 92nd percentile rank, and a nearest-rival cluster within a 1.4% band. The RX 7400 OEM has no benchmark scores, no average score, and no nearest rivals. Any direct performance comparison is impossible from the database alone. What the data does show is that the RTX 5090 belongs to the top tier of recorded GPUs, while the RX 7400 OEM has no recorded data to place it anywhere.
From a specifications standpoint, the RTX 5090 dominates in every measurable compute and memory category: shading units, texture units, ROPs, RT cores, tensor cores, FP32 and FP16 throughput, memory capacity, bus width, bandwidth, pixel rate, texture rate, and clock speeds. It also uses a newer memory type (GDDR7 versus GDDR6) and a newer PCIe interface (5.0 x16 versus 4.0 x8). The RX 7400 OEM has the advantage in power draw, with a 55 W TDP versus 575 W, and a smaller physical footprint: a single-slot, 167 mm card versus a dual-slot, 304 mm long, 137 mm tall, 40 mm wide card.
The launch MSRP of the RTX 5090 is 1,999 USD. The RX 7400 OEM has no launch MSRP listed. The RTX 5090 was released on 2025-01-29, while the RX 7400 OEM was released on 2025-08-07. The RTX 5090’s production status is listed as Active; the RX 7400 OEM’s production status is not listed.
The data does not support a conclusion that one card is “better” in a general sense. It supports the conclusion that the RTX 5090 is a high-end, high-power, high-throughput GPU with extensive benchmark coverage, while the RX 7400 OEM is a low-power, compact GPU with no benchmark coverage. If the selection criterion is recorded performance and feature set, the RTX 5090 is the only card with data to evaluate. If the criterion is power efficiency and physical size, the RX 7400 OEM’s specifications are clearly designed for minimal power and space, but no performance data exists to validate its capabilities.
Specification Differences
The following fields differ between the two cards:
- Architecture: RDNA 3.0 versus Blackwell 2.0
- Process node: 6 nm versus 5 nm
- Transistors: 13,300 million versus 92,200 million
- Die size: 204 mm² versus 750 mm²
- Transistor density: 65.2M / mm² versus 122.9M / mm²
- Base clock: 330 MHz versus 2017 MHz
- Boost clock: 1100 MHz versus 2407 MHz
- Memory clock: 1350 MHz 10.8 Gbps effective versus 1750 MHz 28 Gbps effective
- Memory size: 8 GB versus 32 GB
- Memory type: GDDR6 versus GDDR7
- Memory bus: 128 bit versus 512 bit
- Memory bandwidth: 172.8 GB/s versus 1.79 TB/s
- Shading units: 1792 versus 21760
- TMUs: 112 versus 680
- ROPs: 64 versus 176
- RT cores: 28 versus 170
- Tensor cores: not listed versus 680
- Pixel rate: 70.40 GPixel/s versus 423.6 GPixel/s
- Texture rate: 123.2 GTexel/s versus 1,636.8 GTexel/s
- FP32: 7.885 TFLOPS versus 104.8 TFLOPS
- FP16: 7.885 TFLOPS (1:1) versus 104.8 TFLOPS (1:1)
- TDP: 55 W versus 575 W
- Slot width: Single-slot versus Dual-slot
- Power connectors: 1x 6-pin versus 1x 16-pin
- Suggested PSU: 250 W versus 950 W
- Bus interface: PCIe 4.0 x8 versus PCIe 5.0 x16
- Display outputs: 1x HDMI 2.1a, 3x DisplayPort 2.1 versus 1x HDMI 2.1b, 3x DisplayPort 2.1b
- Dimensions: 167 mm length versus 304 mm length, 137 mm height, 40 mm width
- Production status: not listed versus Active
- Release date: 2025-08-07 versus 2025-01-29
- Launch MSRP: not listed versus 1,999 USD
- Benchmark scores: none versus ten recorded scores
- Average benchmark score: 0 versus 79,842
- Percentile vs all GPUs: 50 versus 92
- Nearest rivals: none versus four listed
Where Each One Wins
Based strictly on the data, the RTX 5090 wins in every measured performance category. Its recorded benchmark scores span multiple API generations and workloads, from PassMark DirectX 9 (395) to Geekbench Vulkan (376,728). Its average score of 79,842 places it at the 92nd percentile, and its nearest rivals are all within a 1.4% band, indicating a tightly contested top tier. The RTX 5090 also wins on raw specifications: more shading units, more texture units, more ROPs, more RT cores, more tensor cores, higher clocks, more memory, wider bus, higher bandwidth, and higher pixel and texture rates. It uses GDDR7 memory and PCIe 5.0, both newer standards than the RX 7400 OEM’s GDDR6 and PCIe 4.0.
The RX 7400 OEM wins in power and physical footprint. Its TDP of 55 W is less than one-tenth of the RTX 5090’s 575 W. It requires a 250 W PSU versus 950 W. It uses a single 6-pin power connector versus a single 16-pin connector. It is a single-slot card at 167 mm length, while the RTX 5090 is a dual-slot card at 304 mm length, 137 mm height, and 40 mm width. The RX 7400 OEM also has a later release date (2025-08-07 versus 2025-01-29), though this is a chronological fact, not a performance indicator. Its transistor density of 65.2M / mm² is lower than the RTX 5090’s 122.9M / mm², but its total power draw is drastically lower, which could make it suitable for systems with strict power or space limits. The data does not include any benchmark scores for the RX 7400 OEM, so no performance-based use case can be validated from the database. The RTX 5090, by contrast, has a clear performance profile across ten tests, including strong showings in compute (26,756 in PassMark GPU compute) and modern APIs (18,355 in 3DMark Steel Nomad DX12).