AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5060 GB205 Comparison
AMD Radeon RX 7400 OEM
GeForce RTX 5060 GB205
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA GeForce RTX 5060 GB205
The AMD Radeon RX 7400 OEM and the NVIDIA GeForce RTX 5060 GB205 occupy very different positions in the database, despite both being recent additions to their respective product stacks. The RX 7400 OEM is a low-power, single-slot part based on the RDNA 3.0 architecture, while the RTX 5060 GB205 is a dual-slot mainstream card built on the Blackwell 2.0 architecture. The recorded specifications show a clear performance hierarchy, but the data also reveals interesting trade-offs in power draw, physical design, and interface support that go beyond raw compute figures.
Head-to-Head Benchmarks
The database contains no direct head-to-head benchmark results for these two cards, and both have an average benchmark score of zero with no recorded wins on either side. The percentileVsAllGpus field places each at 50, meaning they sit at the median of all GPUs tracked in the database, though this does not represent a comparative measurement between the two. Without recorded benchmark scores, the comparison must rely entirely on the theoretical throughput and fill rate figures listed in the specification records.
The FP32 compute figures show the largest single gap. The RTX 5060 GB205 delivers 19.18 TFLOPS, while the RX 7400 OEM produces 7.885 TFLOPS. That is roughly 2.43 times the raw shader throughput, which translates directly to a substantial advantage in any shader-bound workload. The texture rate tells a similar story: the NVIDIA card reaches 299.6 GTexel/s versus 123.2 GTexel/s for the AMD part, a difference of 176.4 GTexel/s. The pixel rate also favors NVIDIA at 119.9 GPixel/s against 70.40 GPixel/s, a gap of 49.5 GPixel/s. Every major throughput metric in the database points in the same direction, with NVIDIA holding a lead of roughly 1.4 to 2.4 times depending on the specific operation.
Memory bandwidth is another area of decisive separation. The RTX 5060 GB205 uses GDDR7 memory running at 1750 MHz with a 28 Gbps effective data rate across a 128-bit bus, yielding 448.0 GB/s of bandwidth. The RX 7400 OEM uses GDDR6 at 1350 MHz with 10.8 Gbps effective and the same 128-bit bus width, yielding 172.8 GB/s. The NVIDIA card provides 275.2 GB/s more bandwidth, a factor of 2.59. This advantage matters for texture-heavy scenes, high-resolution rendering, and any workload that saturates memory traffic, which is common in modern games and compute tasks.
The AMD card does hold one notable advantage in the specifications: power consumption. Its TDP is 55 W, compared to 145 W for the NVIDIA part. This 90 W difference means the RX 7400 OEM achieves its 7.885 TFLOPS with far less power draw. The efficiency per watt is not directly listed, but the data implies the AMD card is substantially more frugal. The NVIDIA card also requires a higher suggested PSU, 300 W versus 250 W, and uses a dual-slot cooler with a length of 241 mm and 9.5 inches, whereas the AMD card fits a single-slot 167 mm, 6.6 inch design. For constrained systems, the AMD part is clearly the lower-impact option.
Architecture Differences
The two cards come from different foundries and design philosophies. The RX 7400 OEM is built on a 6 nm process at TSMC with 13,300 million transistors packed into a 204 mm² die, giving a transistor density of 65.2M per mm². The RTX 5060 GB205 uses TSMC's 5 nm process with 31,100 million transistors on a 263 mm² die, yielding 118.3M per mm². The NVIDIA chip crams more than twice the transistors into a die that is only 59 mm² larger, which explains its higher throughput but also its higher power requirement.
The shader configurations differ significantly. The AMD card has 1792 shading units, 112 texture mapping units, and 64 render output units. The NVIDIA card has 3840 shading units, 120 TMUs, and only 48 ROPs. The ROP count is a rare case where AMD leads, with 16 more ROPs than NVIDIA. This partially explains why the pixel rate gap is smaller than the compute gap, though NVIDIA still wins that metric overall. The RT core counts are close: 28 for AMD versus 30 for NVIDIA. The NVIDIA card adds 120 tensor cores, a feature class entirely absent from the AMD specification, which lists tensor cores as null.
Memory technology differs at the physical level. The RX 7400 OEM uses GDDR6, while the RTX 5060 GB205 uses GDDR7, a newer standard that allows the same 128-bit bus to deliver 448.0 GB/s versus 172.8 GB/s. Both cards have 8 GB of memory, so capacity is identical, but the bandwidth advantage is a direct result of the newer memory generation and higher effective clock speeds.
The bus interface also differs. The AMD card uses PCIe 4.0 x8, while the NVIDIA card uses PCIe 5.0 x8. The newer PCIe 5.0 standard doubles the per-lane bandwidth available to the GPU, which can matter for data transfer to and from system memory, though the practical impact depends on the workload and platform. The display outputs are similar in count, with both offering one HDMI port and three DisplayPort connections, but the versions differ: AMD provides HDMI 2.1a and DisplayPort 2.1, while NVIDIA provides HDMI 2.1b and DisplayPort 2.1b.
The release dates are recorded as August 7, 2025 for the AMD card and May 31, 2026 for the NVIDIA card, a gap of roughly ten months. The AMD card has no recorded production status, while the NVIDIA card is marked as active. The predecessor and successor fields also differ: the RX 7400 OEM lists Navi II as predecessor and Navi IV as successor, while the RTX 5060 GB205 lists GeForce 40 and GeForce 60 respectively.
FAQ
Q: Which card has higher FP32 compute performance?
A: The RTX 5060 GB205 delivers 19.18 TFLOPS of FP32 compute, which is 2.43 times the 7.885 TFLOPS of the RX 7400 OEM. The NVIDIA card leads in every recorded throughput metric, including texture rate and pixel rate.
Q: Do both cards have the same memory capacity?
A: Yes, both have 8 GB of memory. However, the RTX 5060 GB205 uses GDDR7 with a bandwidth of 448.0 GB/s, while the RX 7400 OEM uses GDDR6 with a bandwidth of 172.8 GB/s. The bus width is identical at 128 bits for both.
Q: What is the power consumption difference?
A: The RX 7400 OEM has a TDP of 55 W, while the RTX 5060 GB205 has a TDP of 145 W. The AMD card also requires a lower suggested PSU of 250 W versus 300 W for the NVIDIA card.
Q: Which card has more shading units?
A: The RTX 5060 GB205 has 3840 shading units, more than double the 1792 shading units on the RX 7400 OEM. The NVIDIA card also has 120 tensor cores, a feature the AMD card does not list.
Q: How do the physical dimensions compare?
A: The RX 7400 OEM is a single-slot card measuring 167 mm in length, while the RTX 5060 GB205 is a dual-slot card measuring 241 mm in length, 111 mm in height, and 40 mm in width. The AMD card is substantially smaller.
Q: Which card uses a newer PCIe interface?
A: The RTX 5060 GB205 uses PCIe 5.0 x8, while the RX 7400 OEM uses PCIe 4.0 x8. Both use an x8 lane configuration, but the newer standard on the NVIDIA card provides higher per-lane bandwidth.
Specification Differences
The two cards differ across nearly every major specification category. The process node differs: 6 nm for AMD versus 5 nm for NVIDIA. Transistor count is 13,300 million for AMD versus 31,100 million for NVIDIA. Die size is 204 mm² for AMD versus 263 mm² for NVIDIA. Transistor density is 65.2M per mm² for AMD versus 118.3M per mm² for NVIDIA.
Clock speeds show a dramatic difference. The RX 7400 OEM has a base clock of 330 MHz and a boost clock of 1100 MHz. The RTX 5060 GB205 has a base clock of 2280 MHz and a boost clock of 2497 MHz. Memory clocks are 1350 MHz with 10.8 Gbps effective for AMD versus 1750 MHz with 28 Gbps effective for NVIDIA.
The compute units differ in every category. Shading units: 1792 versus 3840. TMUs: 112 versus 120. ROPs: 64 versus 48. RT cores: 28 versus 30. Tensor cores: null for AMD versus 120 for NVIDIA. Pixel rate: 70.40 GPixel/s versus 119.9 GPixel/s. Texture rate: 123.2 GTexel/s versus 299.6 GTexel/s. FP32: 7.885 TFLOPS versus 19.18 TFLOPS. FP16 is identical to FP32 for both at 7.885 TFLOPS and 19.18 TFLOPS respectively.
Power and physical design differ. TDP: 55 W versus 145 W. Slot width: single-slot versus dual-slot. Power connectors: 1x 6-pin versus 1x 8-pin. Suggested PSU: 250 W versus 300 W. Bus interface: PCIe 4.0 x8 versus PCIe 5.0 x8. Display outputs: HDMI 2.1a and DisplayPort 2.1 versus HDMI 2.1b and DisplayPort 2.1b. Length: 167 mm versus 241 mm. The NVIDIA card also records height and width dimensions, while the AMD card does not.
Memory specification differs in type and bandwidth. Both use 8 GB and a 128-bit bus, but AMD uses GDDR6 with 172.8 GB/s, while NVIDIA uses GDDR7 with 448.0 GB/s. The release dates differ by roughly ten months, and the NVIDIA card has an active production status while the AMD card has none recorded. The launch MSRP for the RTX 5060 GB205 is 299 USD, stated once here as recorded in the database. The RX 7400 OEM has no launch MSRP listed.
Where Each One Wins
The RTX 5060 GB205 wins on raw performance across the board. It has higher FP32 compute, higher texture rate, higher pixel rate, more shading units, more TMUs, more RT cores, tensor cores, and significantly higher memory bandwidth. For any workload that stresses shader throughput, texture sampling, or memory bandwidth, the data points to the NVIDIA card as the stronger performer. The 448.0 GB/s bandwidth versus 172.8 GB/s is particularly relevant for modern games with large texture sets and for compute tasks that stream data through memory.
The RX 7400 OEM wins on power efficiency and physical footprint. Its 55 W TDP is 90 W lower than the NVIDIA card, and its single-slot, 167 mm design fits in far more compact chassis. The 250 W suggested PSU is lower than the 300 W required for the NVIDIA card, making the AMD card easier to integrate into existing systems with modest power supplies. The AMD card also has more ROPs, 64 versus 48, which could provide some advantage in specific rasterization scenarios, though the overall pixel rate still favors NVIDIA.
The memory capacity is equal at 8 GB, so neither card wins on capacity. The bus width is also equal at 128 bits. The API support is identical: both list DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The display output count is the same at one HDMI and three DisplayPort connections, though the versions differ.
The Verdict
The data presents a straightforward performance hierarchy. The RTX 5060 GB205 is the faster card by every recorded throughput metric, with 2.43 times the FP32 compute, 2.43 times the texture rate, 1.70 times the pixel rate, and 2.59 times the memory bandwidth of the RX 7400 OEM. It also offers tensor cores, which the AMD card lacks entirely, and uses the newer PCIe 5.0 interface. Its higher TDP of 145 W and dual-slot design are the trade-offs for that performance.
The RX 7400 OEM serves a different role. Its 55 W TDP, single-slot design, and shorter 167 mm length make it suitable for systems where space and power are limited. The 2.43 times compute deficit is significant, but the card delivers usable performance at a fraction of the power draw. The higher ROP count of 64 versus 48 gives it a small structural advantage in pure rasterization hardware, even if the overall pixel rate still trails.
Users who prioritize compute throughput, memory bandwidth, and modern features like tensor cores should select the RTX 5060 GB205. Users who need a low-profile, low-power card for compact builds or power-constrained environments should consider the RX 7400 OEM. The database shows no scenario where the AMD card matches or exceeds the NVIDIA card in raw performance, but the power and size advantages are real and measurable. The choice depends on whether the workload values maximum throughput or minimum system impact.