AMD Radeon R9 M395X vs NVIDIA RTX PRO 4000 Blackwell Comparison
AMD Radeon R9 M395X
RTX PRO 4000 Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R9 M395X vs NVIDIA RTX PRO 4000 Blackwell
The NVIDIA RTX PRO 4000 Blackwell and AMD Radeon R9 M395X represent two vastly different eras of GPU design, separated by a decade of architectural evolution. The data shows a clear performance hierarchy, but the specific benchmark results reveal nuanced strengths beyond raw compute. The RTX PRO 4000 Blackwell, built on the 5 nm process with 45,600 million transistors, delivers an average benchmark score of 27,135, placing it in the 72nd percentile of all GPUs. The R9 M395X, a 28 nm chip with 5,000 million transistors, achieves an average score of 25,891, sitting in the 71st percentile. While the overall scores are relatively close, the disparity in individual test categories is dramatic, painting a picture of two processors optimized for entirely different workloads.
Head-to-Head Benchmarks
The most striking numerical gap appears in compute-focused workloads. In the Passmark GPU Compute test, the RTX PRO 4000 Blackwell scores 14,805, a figure that dwarfs the R9 M395X’s available compute results. However, direct comparison is complicated because the R9 M395X lacks a Passmark GPU Compute result in the data; its compute performance is instead captured through Geekbench OpenCL, where it scores 17,829. The RTX PRO 4000 Blackwell, by contrast, shows its strength in the Geekbench Vulkan test, scoring 194,168. This is a massive lead, indicating that the NVIDIA GPU’s modern architecture excels in cross-platform, low-level graphics APIs.
In DirectX 11 and DirectX 12 workloads, the NVIDIA card is overwhelmingly dominant. The RTX PRO 4000 Blackwell scores 276 in Passmark DirectX 11 and 97 in Passmark DirectX 12. The R9 M395X has no corresponding DirectX 11 or 12 scores in the data, but its older GCN 3.0 architecture only supports DirectX 12 (12_0), whereas the NVIDIA GPU supports DirectX 12 Ultimate (12_2). This feature-level difference is critical; the newer API version allows for advanced features like mesh shaders and variable rate shading, which the older AMD card cannot access. The RTX PRO 4000 Blackwell’s Passmark DirectX 9 score of 354 and DirectX 10 score of 173 further illustrate its forward-looking design, though these legacy tests are less relevant for modern workloads.
The R9 M395X’s only benchmark showing competitive strength is Geekbench Metal, where it scores 33,953. This is a notable result, as it is the sole test in the data where the AMD card outperforms or matches the NVIDIA GPU. The RTX PRO 4000 Blackwell has no Metal benchmark listed, so a direct comparison is impossible. However, the R9 M395X’s Metal score suggests its GCN architecture has optimized paths for Apple’s graphics API, which aligns with its historical use in mobile workstations. The RTX PRO 4000 Blackwell’s 3DMark Steel Nomad DX12 score of 4,648 is the only other modern benchmark in the data, and it underscores the NVIDIA card’s superiority in current-generation gaming and rendering loads.
Where Each One Wins
The RTX PRO 4000 Blackwell wins decisively in every metric that reflects modern, high-throughput workloads. Its FP32 performance of 36.83 TFLOPS is over 12 times higher than the R9 M395X’s 2.961 TFLOPS, making it the clear choice for scientific simulation, AI training, and real-time ray tracing. The NVIDIA card’s 70 ray tracing cores and 280 tensor cores provide dedicated hardware that the AMD card entirely lacks, as the R9 M395X has no RT or tensor core counts listed. In memory bandwidth, the RTX PRO 4000 Blackwell’s 672.0 GB/s is more than four times the R9 M395X’s 160.0 GB/s, which is essential for handling large datasets and high-resolution textures. The NVIDIA GPU’s 24 GB GDDR7 memory, compared to the AMD’s 8 GB GDDR5, also ensures it can hold larger models and scenes without spilling to slower storage.
The R9 M395X wins in the specific niche of low-power, portable integration. Its 75 W TDP is nearly half the RTX PRO 4000 Blackwell’s 140 W, and its MXM Module form factor with no power connectors makes it suitable for slim laptops where power efficiency is paramount. The AMD card’s Geekbench Metal score of 33,953 is a qualitative win for macOS-based workflows, as it indicates optimized performance in that ecosystem. Additionally, the R9 M395X’s 256-bit memory bus, though slower overall, provides better memory efficiency per byte in certain legacy applications. For users running older software that relies on GCN-era optimizations, the R9 M395X may offer more predictable compatibility, but this is a secondary consideration given its end-of-life production status.
Architecture Differences
The architectural gap between these two GPUs is generational. The RTX PRO 4000 Blackwell uses the GB203 chip on a 5 nm TSMC process, achieving a transistor density of 120.6 million transistors per square millimeter. Its die size is 378 mm², packing 45,600 million transistors. In contrast, the R9 M395X uses the Amethyst chip on a 28 nm process, with a density of just 13.7 million transistors per square millimeter and a die size of 366 mm², holding 5,000 million transistors. This means the NVIDIA chip crams more than nine times the transistors into a similar physical footprint, enabling its massive 8,960 shading units, 280 TMUs, and 96 ROPs. The AMD card has only 2,048 shading units, 128 TMUs, and 32 ROPs.
Memory architecture also diverges sharply. The RTX PRO 4000 Blackwell uses 24 GB of GDDR7 on a 192-bit bus, running at 1750 MHz with 28 Gbps effective speed. The R9 M395X uses 8 GB of GDDR5 on a 256-bit bus, running at 1250 MHz with 5 Gbps effective speed. The NVIDIA GPU’s newer memory technology delivers higher bandwidth despite a narrower bus, demonstrating the efficiency of modern memory controllers. The RTX PRO 4000 Blackwell also supports PCIe 5.0 x16, while the R9 M395X is limited to PCIe 3.0 x16, doubling the potential data transfer rate to the host system. In terms of API support, the NVIDIA card supports Vulkan 1.4 and DirectX 12 Ultimate, while the AMD card is capped at Vulkan 1.2.170 and DirectX 12 (12_0). The NVIDIA GPU’s display outputs include 4x DisplayPort 2.1b, whereas the AMD card is "Portable Device Dependent," reflecting its mobile-oriented design.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The NVIDIA RTX PRO 4000 Blackwell has a higher average benchmark score of 27,135, compared to the AMD Radeon R9 M395X’s 25,891. The NVIDIA card sits in the 72nd percentile of all GPUs, while the AMD card is in the 71st percentile.
Q: What is the transistor density difference between the two cards?
A: The NVIDIA RTX PRO 4000 Blackwell has a transistor density of 120.6 million transistors per square millimeter, while the AMD Radeon R9 M395X has a density of 13.7 million. This is a roughly nine-fold difference, reflecting the newer 5 nm process versus the older 28 nm node.
Q: Does the AMD Radeon R9 M395X support ray tracing?
A: The data does not list any ray tracing cores for the AMD Radeon R9 M395X. In contrast, the NVIDIA RTX PRO 4000 Blackwell has 70 dedicated ray tracing cores.
Q: Which GPU offers more VRAM?
A: The NVIDIA RTX PRO 4000 Blackwell offers 24 GB of GDDR7 memory, while the AMD Radeon R9 M395X offers 8 GB of GDDR5. The NVIDIA card’s memory bandwidth is 672.0 GB/s, compared to the AMD card’s 160.0 GB/s.
Q: What are the nearest rivals for each GPU?
A: The NVIDIA RTX PRO 4000 Blackwell’s nearest rivals include the AMD Radeon RX 6700 XT (deltaPct -1.1%), NVIDIA GeForce RTX 4070 Mobile (deltaPct -1.1%), NVIDIA GeForce RTX 3090 (deltaPct -1.6%), and NVIDIA RTX A4000 (deltaPct 1.7%). The AMD Radeon R9 M395X’s nearest rivals are the AMD FirePro W7100 (deltaPct 0.1%), AMD FirePro D700 (deltaPct 0.2%), AMD Radeon RX 6750 XT (deltaPct -0.5%), and NVIDIA GeForce RTX 3080 Ti Mobile (deltaPct 0.6%).
Q: Which GPU has a higher FP32 performance?
A: The NVIDIA RTX PRO 4000 Blackwell has an FP32 performance of 36.83 TFLOPS, while the AMD Radeon R9 M395X has 2.961 TFLOPS. This represents a 12.4-fold advantage for the NVIDIA card.
The Verdict
The data strongly favors the NVIDIA RTX PRO 4000 Blackwell for virtually any professional or modern compute task. Its FP32 throughput of 36.83 TFLOPS is a full order of magnitude above the R9 M395X, and its dedicated ray tracing and tensor cores make it suitable for AI workloads and real-time rendering that the AMD card simply cannot handle. The 24 GB VRAM capacity and 672.0 GB/s bandwidth provide ample headroom for large models and high-resolution textures, while the PCIe 5.0 interface ensures rapid data transfer. Users working in 3D animation, deep learning, or high-end CAD will benefit from the NVIDIA card’s architectural advantages, and its Active production status means ongoing driver support.
The AMD Radeon R9 M395X, however, retains a narrow but real niche for portable, power-constrained systems. Its 75 W TDP and MXM Module form factor allow it to fit into laptops where the 140 W, single-slot RTX PRO 4000 Blackwell would be impractical. The Geekbench Metal score of 33,953 suggests it is optimized for macOS environments, making it a viable option for legacy Apple hardware. For users running older software that predates modern API standards, the R9 M395X’s simpler GCN architecture may offer more predictable compatibility, though its end-of-life status limits future optimization. If the workload is legacy, low-power, or macOS-bound, the R9 M395X is the logical choice; for everything else, the data unambiguously points to the NVIDIA RTX PRO 4000 Blackwell.
Specification Differences
| Specification | NVIDIA RTX PRO 4000 Blackwell | AMD Radeon R9 M395X |
|----------------|-------------------------------|----------------------|
| Architecture | Blackwell 2.0 | GCN 3.0 |
| Process Node | 5 nm | 28 nm |
| Transistors | 45,600 million | 5,000 million |
| Die Size | 378 mm² | 366 mm² |
| Transistor Density | 120.6M / mm² | 13.7M / mm² |
| Memory Size | 24 GB | 8 GB |
| Memory Type | GDDR7 | GDDR5 |
| Memory Bus Width | 192 bit | 256 bit |
| Memory Bandwidth | 672.0 GB/s | 160.0 GB/s |
| Memory Clock | 1750 MHz 28 Gbps effective | 1250 MHz 5 Gbps effective |
| Shading Units | 8960 | 2048 |
| TMUs | 280 | 128 |
| ROPs | 96 | 32 |
| RT Cores | 70 | null |
| Tensor Cores | 280 | null |
| FP32 Performance | 36.83 TFLOPS | 2.961 TFLOPS |
| Pixel Rate | 197.3 GPixel/s | 23.14 GPixel/s |
| Texture Rate | 575.4 GTexel/s | 92.54 GTexel/s |
| TDP | 140 W | 75 W |
| Slot Width | Single-slot | MXM Module |
| Power Connectors | 1x 16-pin | None |
| Bus Interface | PCIe 5.0 x16 | PCIe 3.0 x16 |
| Display Outputs | 4x DisplayPort 2.1b | Portable Device Dependent |
| DirectX Support | 12 Ultimate (12_2) | 12 (12_0) |
| Vulkan Support | 1.4 | 1.2.170 |
| Production Status | Active | End-of-life |
| Release Date | 2025-03-17 | 2015-05-04 |