AMD Radeon R9 M290X vs AMD Radeon R9 M395X Comparison
AMD Radeon R9 M290X
Radeon R9 M395X
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R9 M290X vs AMD Radeon R9 M395X
FAQ
Q: What are the average benchmark scores for the AMD Radeon R9 M395X and the AMD Radeon R9 M290X?
A: The R9 M395X has an average benchmark score of 25,891, while the R9 M290X averages 23,276. The M395X sits at the 71st percentile of all GPUs, and the M290X sits at the 68th percentile.
Q: Which GPU wins in Geekbench Metal, and by how much?
A: The AMD Radeon R9 M395X wins Geekbench Metal with a score of 33,953 against the M290X's 24,524, a 38.4% advantage.
Q: Which GPU wins in Geekbench OpenCL?
A: The AMD Radeon R9 M290X wins Geekbench OpenCL, scoring 22,028 versus the M395X's 17,829, a 19.1% lead.
Q: How much memory does each card carry?
A: The R9 M395X has 8 GB of GDDR5 memory on a 256-bit bus, while the R9 M290X has 4 GB of GDDR5 memory on the same 256-bit bus width.
Q: What are the memory clock speeds and bandwidth figures?
A: The M395X runs memory at 1250 MHz (5 Gbps effective) with 160.0 GB/s bandwidth. The M290X runs memory at 1200 MHz (4.8 Gbps effective) with 153.6 GB/s bandwidth.
Q: What are the thermal design power ratings?
A: The R9 M395X has a TDP of 75 W, while the R9 M290X has a TDP of 100 W.
The Verdict
The data splits these two mobile GPUs cleanly by workload type. For Metal-based compute tasks, the AMD Radeon R9 M395X is the clear pick: its 33,953 Metal score is 38.4% above the M290X's 24,524, and its average benchmark score of 25,891 places it in the 71st percentile overall, versus the M290X's 68th percentile. The M395X also packs twice the memory (8 GB versus 4 GB) and a lower TDP (75 W versus 100 W), which suits heavier workloads in constrained chassis.
However, for OpenCL-centric applications, the AMD Radeon R9 M290X is the better choice. Its OpenCL score of 22,028 beats the M395X's 17,829 by 19.1%, a meaningful gap for users who rely on OpenCL compute pipelines. The M290X also has a higher pixel rate (28.80 GPixel/s versus 23.14 GPixel/s), which matters in certain rendering tasks. Its base clock of 850 MHz and boost of 900 MHz are explicitly recorded, whereas the M395X lists no base or boost clock in the database.
Choose the M395X if Metal performance, memory capacity, and power efficiency dominate your requirements. Choose the M290X if OpenCL throughput and pixel fill rate are the priority. Neither card wins outright; the benchmark record shows one win each across the two tests.
Head-to-Head Benchmarks
The Geekbench Metal test delivers the largest margin in this comparison. The R9 M395X scores 33,953 against the M290X's 24,524, producing a 38.4% delta. That is a substantial lead, placing the M395X far ahead in Metal-centric workloads. This aligns with its shading unit count: 2,048 versus 1,280 on the M290X, and its texture rate of 92.54 GTexel/s versus 72.00 GTexel/s. The M395X also has 128 texture mapping units, compared to 80 on the M290X, which likely contributes to its Metal advantage.
The Geekbench OpenCL test flips the result. The M290X scores 22,028, which is 19.1% higher than the M395X's 17,829. This is notable because the M395X has a higher FP32 rating (2.961 TFLOPS versus 2.304 TFLOPS) and more shading units. The recorded data shows the M290X winning despite lower raw FP32 throughput, suggesting that OpenCL performance is influenced by factors beyond shader count, such as driver optimization or memory subsystem behavior. The M290X's pixel rate is also higher at 28.80 GPixel/s versus 23.14 GPixel/s, which could help in certain OpenCL kernels.
Across both tests, the wins split evenly: one each. The average benchmark score still favors the M395X (25,891 versus 23,276), a 10.1% overall margin. The nearest rivals in the database reinforce this positioning: the M395X's closest competitor is the AMD FirePro W7100 at 25,856 (0.1% delta), while the M290X's closest rival is the AMD Radeon RX 6600M at 23,273 (0% delta). The M395X also sits near the AMD Radeon RX 6750 XT (26,011, -0.5% delta) and the NVIDIA GeForce RTX 3080 Ti Mobile (25,740, 0.6% delta), indicating it holds its own against modern discrete mobile parts in aggregate scoring.
Specification Differences
The two GPUs diverge on several recorded specifications. Memory size differs: the R9 M395X has 8 GB, the R9 M290X has 4 GB. Memory clock also differs: 1250 MHz (5 Gbps effective) versus 1200 MHz (4.8 Gbps effective), yielding 160.0 GB/s versus 153.6 GB/s bandwidth. The M395X has 2,048 shading units to the M290X's 1,280. Texture mapping units are 128 versus 80. Raster operation units are identical at 32.
Pixel rate differs: the M290X posts 28.80 GPixel/s, while the M395X posts 23.14 GPixel/s. Texture rate goes the other way: 92.54 GTexel/s on the M395X versus 72.00 GTexel/s on the M290X. FP32 compute is 2.961 TFLOPS on the M395X versus 2.304 TFLOPS on the M290X. The M395X lists FP16 at 2.961 TFLOPS (1:1 ratio), while the M290X has no recorded FP16 value.
TDP is lower on the M395X at 75 W, versus 100 W on the M290X. Base and boost clocks are only recorded for the M290X: 850 MHz base and 900 MHz boost. The M395X has no base or boost clock listed in the database. Both use PCIe 3.0 x16, MXM Module slot width, no power connectors, and portable-device-dependent display outputs. Both are end-of-life products with the same predecessor ("Solar System") and successor ("Polaris Mobile").
Architecture Differences
The architectural split is clear. The R9 M395X uses the Amethyst chip built on GCN 3.0 architecture, while the R9 M290X uses the Neptune chip on GCN 1.0. Both are manufactured on a 28 nm process at TSMC, but the die sizes and transistor counts differ substantially. The M395X has 5,000 million transistors on a 366 mm² die, giving a transistor density of 13.7M per mm². The M290X has 2,800 million transistors on a 212 mm² die, with a density of 13.2M per mm².
The M395X belongs to the "Gem System (R9 M300)" generation, while the M290X belongs to the "Gem System (R9 M200)" generation. Both are listed as having the same predecessor and successor, but the generation gap reflects a newer architecture on the M395X. The M395X supports DirectX 12 (12_0), whereas the M290X supports DirectX 12 (11_1). Both support OpenGL 4.6 and Vulkan 1.2.170.
The M395X's GCN 3.0 architecture brings a more modern feature set, including the 1:1 FP16 ratio, which is absent on the M290X. The M395X also carries more shading units and TMUs, which aligns with its higher texture rate and FP32 throughput. The M290X's GCN 1.0 design, despite older roots, posts a higher pixel rate and wins the OpenCL benchmark, indicating that architecture generation does not uniformly determine performance across all APIs.
Where Each One Wins
The AMD Radeon R9 M395X wins in Metal compute, aggregate benchmarking, and memory-heavy scenarios. Its 38.4% Metal lead is the single largest margin in this comparison. It also holds a 10.1% advantage in average benchmark score (25,891 versus 23,276). The 8 GB memory capacity doubles the M290X's 4 GB, which benefits workloads that exceed a 4 GB footprint. The lower TDP (75 W versus 100 W) makes it the more power-efficient option. Its 2.961 TFLOPS FP32 and 92.54 GTexel/s texture rate give it a raw throughput edge.
The AMD Radeon R9 M290X wins in OpenCL compute, posting a 19.1% higher score (22,028 versus 17,829). It also has a higher pixel rate (28.80 GPixel/s versus 23.14 GPixel/s), which can benefit rasterization-heavy tasks. The M290X's recorded base and boost clocks (850 MHz and 900 MHz) provide a reference point that the M395X lacks in the database. For users whose primary API is OpenCL, the M290X is the stronger choice despite its older GCN 1.0 architecture.
Use-case guidance: pick the M395X for Metal-based rendering, machine learning frameworks relying on Metal, or tasks needing large frame buffers. Pick the M290X for OpenCL-driven compute, pixel-fill-bound operations, or environments where the older architecture's driver profile is better established. The benchmark data shows no universal winner; the decision hinges entirely on the target API and workload.