AMD Radeon R9 M275X vs AMD Radeon RX 550 Comparison
AMD Radeon R9 M275X
Radeon RX 550
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R9 M275X vs AMD Radeon RX 550
The AMD Radeon RX 550 and AMD Radeon R9 M275X represent two distinct eras of AMD mobile graphics, separated by three years of architectural evolution. The data shows a fascinating split: the older R9 M275X edges ahead in one compute-oriented benchmark, while the newer RX 550 delivers a decisive victory in a modern graphics API test. Their overall performance profiles are remarkably close, with the RX 550 averaging 11,075 points and the R9 M275X averaging 10,582 points — a difference of roughly 4.7% in favor of the newer card, despite the R9 M275X possessing a higher raw shader count.
Head-to-Head Benchmarks
The two cards split their head-to-head matchups exactly one win apiece, but the magnitude of each victory tells a compelling story. In Geekbench OpenCL, the AMD Radeon R9 M275X scores 11,200 against the RX 550’s 11,063, a narrow 1.2% margin. This result is counterintuitive given the architectural gap, suggesting that the older card’s 640 shading units — 25% more than the RX 550’s 512 — can still translate into a slight advantage in certain compute workloads that are not heavily dependent on newer instruction sets or memory bandwidth optimizations.
The Geekbench Vulkan result, however, is where the RX 550 asserts its generational superiority. It scores 12,270 versus the R9 M275X’s 9,964, a commanding 23.1% lead. This is not a marginal improvement; it is a substantial leap that reflects the RX 550’s full support for Vulkan 1.3, compared to the R9 M275X’s older Vulkan 1.2.170 implementation. The delta is large enough to suggest that the RX 550 is not merely faster clock-for-clock but is fundamentally better equipped to handle modern graphics workloads that leverage explicit multi-threading and low-level hardware control.
Looking at the broader benchmark landscape, the RX 550’s average score of 11,075 places it in the 50th percentile of all GPUs, while the R9 M275X sits just below at the 49th percentile. The RX 550 also has a 3DMark Steel Nomad DX12 score of 127, a test the R9 M275X does not appear in the data for, highlighting the newer card’s ability to run contemporary DirectX 12 (12_0) workloads. The R9 M275X’s DirectX support is capped at 12 (11_1), which may exclude it from certain modern titles or force it to fall back on less efficient rendering paths. In terms of nearest rivals, the RX 550’s closest competitor is the NVIDIA GeForce GTX 1650 SUPER, which scores 11,047 — a mere 0.3% difference — while the R9 M275X trades blows with the AMD Radeon RX 550X, which is 1% faster.
Architecture Differences
The fundamental gap between these two GPUs lies in their process technology and compute architecture. The RX 550 is built on GlobalFoundries’ 14 nm node, packing 2,200 million transistors into a 103 mm² die, yielding a transistor density of 21.4 million per square millimeter. In contrast, the R9 M275X uses TSMC’s 28 nm process, with 1,500 million transistors spread across a larger 123 mm² die, resulting in a much lower density of 12.2 million per square millimeter. This density advantage is the primary driver of the RX 550’s efficiency, allowing it to deliver comparable or better performance while operating at a 50 W TDP — a figure not listed for the R9 M275X, but the architectural evidence implies a significant power draw difference.
The microarchitectures themselves are generations apart. The RX 550 employs GCN 4.0, the fourth iteration of AMD’s Graphics Core Next design, which introduced improved shader efficiency and better support for asynchronous compute. The R9 M275X uses the original GCN 1.0, a pioneering design that laid the groundwork but lacks the refinements of later versions. Clock speeds reinforce this divergence: the RX 550 runs at a base of 1100 MHz and boosts to 1183 MHz, while the R9 M275X is limited to 900 MHz base and 925 MHz boost. The RX 550’s higher clocks, combined with its newer architecture, explain why it can overcome a 128-shader-unit deficit in most scenarios.
Memory subsystems also differ notably. Both cards use 2 GB of GDDR5 on a 128-bit bus, but the RX 550 operates its memory at 1750 MHz (7 Gbps effective), delivering 112.0 GB/s of bandwidth. The R9 M275X’s memory runs at 1125 MHz (4.5 Gbps effective), yielding only 72.00 GB/s. This 55.6% bandwidth advantage for the RX 550 is critical for texture-heavy scenes and higher resolutions, even if it does not always show up in synthetic compute tests. Pixel and texture rates follow suit: the RX 550 achieves 18.93 GPixel/s and 37.86 GTexel/s, versus the R9 M275X’s 14.80 GPixel/s and 37.00 GTexel/s.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The AMD Radeon RX 550, with an average score of 11,075 versus the R9 M275X’s 10,582, a difference of 493 points or about 4.7%.
Q: Why does the older R9 M275X sometimes outperform the RX 550 in OpenCL?
A: The R9 M275X has 640 shading units compared to the RX 550’s 512, and in the Geekbench OpenCL test, this raw compute advantage yields a 1.2% higher score (11,200 vs 11,063), despite the newer architecture of the RX 550.
Q: How significant is the RX 550’s lead in Vulkan performance?
A: The RX 550 scores 12,270 against the R9 M275X’s 9,964, a 23.1% advantage. This is largely attributable to the RX 550’s Vulkan 1.3 support versus the R9 M275X’s older Vulkan 1.2.170.
Q: What are the architectural generations of these two GPUs?
A: The RX 550 is based on GCN 4.0 (chip codename Lexa, 14 nm process), while the R9 M275X uses GCN 1.0 (chip codename Venus, 28 nm process).
Q: Do both cards support the same level of DirectX?
A: No. The RX 550 supports DirectX 12 (12_0), while the R9 M275X is limited to DirectX 12 (11_1), which may affect compatibility with certain modern games.
Q: Which card has higher memory bandwidth?
A: The RX 550, at 112.0 GB/s, compared to the R9 M275X’s 72.00 GB/s — a 55.6% advantage for the newer card, due to faster memory clocks (1750 MHz vs 1125 MHz).
Specification Differences
| Specification | AMD Radeon RX 550 | AMD Radeon R9 M275X |
|---|---|---|
| Architecture | GCN 4.0 | GCN 1.0 |
| Process Node | 14 nm (GlobalFoundries) | 28 nm (TSMC) |
| Transistors | 2,200 million | 1,500 million |
| Die Size | 103 mm² | 123 mm² |
| Transistor Density | 21.4M / mm² | 12.2M / mm² |
| Base Clock | 1100 MHz | 900 MHz |
| Boost Clock | 1183 MHz | 925 MHz |
| Memory Clock | 1750 MHz (7 Gbps effective) | 1125 MHz (4.5 Gbps effective) |
| Memory Bandwidth | 112.0 GB/s | 72.00 GB/s |
| Shading Units | 512 | 640 |
| TMUs | 32 | 40 |
| Pixel Rate | 18.93 GPixel/s | 14.80 GPixel/s |
| Texture Rate | 37.86 GTexel/s | 37.00 GTexel/s |
| FP32 Performance | 1,211.4 GFLOPS | 1,184.0 GFLOPS |
| FP16 Performance | 1,211.4 GFLOPS (1:1) | Not specified |
| TDP | 50 W | Not specified |
| Bus Interface | PCIe 3.0 x8 | PCIe 3.0 x16 |
| DirectX Support | 12 (12_0) | 12 (11_1) |
| Vulkan Support | 1.3 | 1.2.170 |
| Release Date | 2017-04-19 | 2014-01-27 |
| Predecessor | Arctic Islands | Solar System |
| Successor | Vega | Polaris Mobile |
| Launch MSRP | 79 USD | Not specified |
The Verdict
The benchmark data paints a clear picture: the AMD Radeon RX 550 is the more capable and future-proof graphics processor. Its 23.1% lead in Vulkan performance is decisive, and its higher memory bandwidth (112.0 GB/s vs 72.00 GB/s) provides a substantial advantage in bandwidth-sensitive workloads. The RX 550 also achieves higher FP32 throughput (1,211.4 GFLOPS vs 1,184.0 GFLOPS) despite having fewer shading units, thanks to its superior clocks and architectural efficiency. The R9 M275X’s only benchmark win — a 1.2% margin in OpenCL — is too narrow to offset the RX 550’s generational advantages in modern APIs.
For users running legacy compute applications that are heavily optimized for raw shader count, the R9 M275X may hold a marginal edge, but this is a niche scenario. The RX 550’s support for DirectX 12 (12_0) and Vulkan 1.3 makes it the only sensible choice for current gaming or graphics workloads. Its 50th percentile ranking versus the R9 M275X’s 49th percentile confirms that it is not just newer but also slightly better positioned in the overall GPU landscape. The RX 550’s launch MSRP was 79 USD, but the data suggests its performance profile, rather than price, is what sets it apart.
Where Each One Wins
The AMD Radeon RX 550 wins in every scenario that involves modern graphics APIs or high-bandwidth memory access. Its Vulkan score of 12,270 is the standout figure, making it the clear choice for DirectX 12 and Vulkan gaming, where its 1.3 support and 12_0 feature level unlock performance that the R9 M275X cannot match. The RX 550’s 112.0 GB/s bandwidth also gives it an edge in texture-heavy applications, and its 18.93 GPixel/s pixel rate is 28% higher than the R9 M275X’s 14.80 GPixel/s, benefiting fill-rate-bound scenarios. The RX 550’s 50 W TDP and compact 145 mm length also suggest it is better suited for small-form-factor or low-power systems, though the R9 M275X’s power draw is not listed for direct comparison.
The AMD Radeon R9 M275X retains a narrow niche in legacy OpenCL compute workloads. Its 640 shading units and 40 TMUs give it a raw compute advantage that shows up in the Geekbench OpenCL score of 11,200, edging out the RX 550 by 1.2%. For applications that rely exclusively on older compute shaders and do not leverage Vulkan or modern DirectX features, the R9 M275X may perform marginally better. Its PCIe 3.0 x16 interface also offers double the bandwidth of the RX 550’s x8 link, which could matter in certain data-transfer-heavy compute tasks, though this does not translate to a benchmark win in the available data. Ultimately, the R9 M275X is a card of its era — functional for its time, but the RX 550’s architectural advancements make it the superior choice for virtually all current use cases.