AMD Radeon R7 M260 vs NVIDIA GeForce RTX 4070 GDDR6 Comparison
AMD Radeon R7 M260
GeForce RTX 4070 GDDR6
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R7 M260 vs NVIDIA GeForce RTX 4070 GDDR6
The Verdict
The data presents an extraordinary generational gulf. The AMD Radeon R7 M260 is a 28 nm GCN 3.0 part from 2014, while the NVIDIA GeForce RTX 4070 GDDR6 is a 5 nm Ada Lovelace chip from 2024. The RTX 4070 GDDR6 produces 29.15 TFLOPS of FP32 compute against the R7 M260's 752.6 GFLOPS — a 38-fold raw throughput advantage. Pixel rate tells a similar story: 158.4 GPixel/s versus 7.840 GPixel/s.
The benchmark database, however, shows both cards at nearly identical average scores (4499 for AMD, 4335 for NVIDIA) and percentile ranks (26th vs 25th). This is a database artifact: the R7 M260 has OpenCL and Vulkan scores, while the RTX 4070 GDDR6 only has a single 3DMark Steel Nomad DX12 score. No head-to-head benchmarks exist between these two, so direct comparison relies on architectural specs rather than shared test workloads.
For a buyer choosing between these, the data is unambiguous: the RTX 4070 GDDR6 supports DirectX 12 Ultimate (12_2), has 46 ray tracing cores and 184 tensor cores, and ships with 12 GB of GDDR6 memory on a 192-bit bus delivering 480.0 GB/s. The R7 M260 offers 2 GB of DDR3 on a 64-bit bus at 14.40 GB/s, with no ray tracing or tensor hardware. Anyone requiring modern gaming features — ray tracing, DLSS-class acceleration, high-resolution textures — must pick the NVIDIA card. The R7 M260 is end-of-life from 2014 and only makes sense for legacy systems or basic 2D workloads.
The RTX 4070 GDDR6's launch MSRP is 599 USD. The R7 M260 has no recorded launch MSRP.
Architecture Differences
The two GPUs share almost nothing architecturally. The R7 M260 uses the Topaz chip built on GCN 3.0, fabricated on a 28 nm process at TSMC. It packs 1,550 million transistors into a 125 mm² die, yielding a transistor density of 12.4 million per mm². The RTX 4070 GDDR6 uses the AD104 chip on Ada Lovelace, fabricated on a 5 nm process, also at TSMC. It contains 35,800 million transistors in a 294 mm² die — a density of 121.8 million per mm², roughly 10 times higher.
The R7 M260 has 384 shading units, 24 texture mapping units, and 8 ROPs. The RTX 4070 GDDR6 has 5,888 shading units, 184 TMUs, and 64 ROPs. The NVIDIA part also adds 46 RT cores and 184 tensor cores, neither of which exist on the AMD chip.
Memory architecture differs fundamentally. The AMD card uses 2 GB of DDR3 with a 64-bit bus, achieving 14.40 GB/s bandwidth. The NVIDIA card uses 12 GB of GDDR6 on a 192-bit bus, achieving 480.0 GB/s — a 33-fold increase in memory bandwidth. Clock speeds also diverge: the R7 M260 runs at 940 MHz base and 980 MHz boost, while the RTX 4070 GDDR6 runs at 1920 MHz base and 2475 MHz boost. Memory clocks are 900 MHz (1800 Mbps effective) versus 2500 MHz (20 Gbps effective).
The feature set diverges completely. The R7 M260 supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.2.170. The RTX 4070 GDDR6 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The NVIDIA card's PCIe interface is 4.0 x16 versus the AMD card's 3.0 x8. The RTX 4070 GDDR6 is a dual-slot card measuring 240 mm by 110 mm by 40 mm, requires a 550 W PSU, and uses a single 16-pin power connector rated at 200 W TDP. The R7 M260 has no listed TDP, slot width, or power connector data.
FAQ
Q: Which card has higher raw compute performance?
A: The RTX 4070 GDDR6 delivers 29.15 TFLOPS FP32 versus the R7 M260's 752.6 GFLOPS. This is a 38.7-fold difference in favor of the NVIDIA card.
Q: Do both cards support the same DirectX version?
A: No. The RTX 4070 GDDR6 supports DirectX 12 Ultimate (12_2), while the R7 M260 supports DirectX 12 (12_0). The NVIDIA card's 12_2 feature level enables advanced ray tracing and mesh shader capabilities.
Q: What is the memory configuration difference?
A: The R7 M260 has 2 GB of DDR3 on a 64-bit bus with 14.40 GB/s bandwidth. The RTX 4070 GDDR6 has 12 GB of GDDR6 on a 192-bit bus with 480.0 GB/s bandwidth — 6 times more capacity and 33 times more bandwidth.
Q: Why do both cards show similar average benchmark scores?
A: The R7 M260's average score of 4499 comes from OpenCL (3708) and Vulkan (5289) tests. The RTX 4070 GDDR6's average of 4335 comes from a single 3DMark Steel Nomad DX12 test (4334.5). The tests measure different workloads and are not directly comparable.
Q: Which card has ray tracing support?
A: Only the RTX 4070 GDDR6 has ray tracing cores — 46 of them. The R7 M260 has no RT cores listed.
Q: What are the production statuses?
A: Both cards are listed as end-of-life. The R7 M260 was released in 2014 and its successor is Polaris Mobile. The RTX 4070 GDDR6 was released in 2024 and its successor is GeForce 50.
Specification Differences
| Field | AMD Radeon R7 M260 | NVIDIA GeForce RTX 4070 GDDR6 |
|---|---|---|
| Architecture | GCN 3.0 | Ada Lovelace |
| Process Node | 28 nm | 5 nm |
| Transistors | 1,550 million | 35,800 million |
| Die Size | 125 mm² | 294 mm² |
| Transistor Density | 12.4M / mm² | 121.8M / mm² |
| Base Clock | 940 MHz | 1920 MHz |
| Boost Clock | 980 MHz | 2475 MHz |
| Memory Clock | 900 MHz / 1800 Mbps effective | 2500 MHz / 20 Gbps effective |
| Memory Size | 2 GB | 12 GB |
| Memory Type | DDR3 | GDDR6 |
| Memory Bus | 64 bit | 192 bit |
| Memory Bandwidth | 14.40 GB/s | 480.0 GB/s |
| Shading Units | 384 | 5,888 |
| TMUs | 24 | 184 |
| ROPs | 8 | 64 |
| RT Cores | None | 46 |
| Tensor Cores | None | 184 |
| Pixel Rate | 7.840 GPixel/s | 158.4 GPixel/s |
| Texture Rate | 23.52 GTexel/s | 455.4 GTexel/s |
| FP32 | 752.6 GFLOPS | 29.15 TFLOPS |
| FP16 | 752.6 GFLOPS (1:1) | 29.15 TFLOPS (1:1) |
| TDP | Not listed | 200 W |
| Slot Width | Not listed | Dual-slot |
| Power Connectors | Not listed | 1x 16-pin |
| Suggested PSU | Not listed | 550 W |
| Bus Interface | PCIe 3.0 x8 | PCIe 4.0 x16 |
| Display Outputs | Not listed | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| DirectX | 12 (12_0) | 12 Ultimate (12_2) |
| Vulkan | 1.2.170 | 1.4 |
| Release Date | 2014-06-10 | 2024-08-19 |
| Predecessor | Solar System | GeForce 30 |
| Successor | Polaris Mobile | GeForce 50 |
Head-to-Head Benchmarks
There are no shared benchmark results between the two GPUs in the database. The R7 M260's benchmarks consist of Geekbench OpenCL scoring 3,708 and Geekbench Vulkan scoring 5,289. These average to 4,499. The RTX 4070 GDDR6 has a single 3DMark Steel Nomad DX12 score of 4,334.5.
The nearest rivals for the R7 M260 include the AMD FirePro W4190M (average 4,505, -0.1% delta), Intel HD Graphics P530 (4,560, -1.3%), AMD Radeon RX 560 (4,569, -1.5%), and AMD Radeon R5 M230 (4,577, -1.7%). The RTX 4070 GDDR6's nearest rivals are the Intel Iris Pro Graphics 5200 (4,360, -0.6%), AMD FirePro W2100 (4,295, +0.9%), NVIDIA GeForce 930M (4,388, -1.2%), and NVIDIA GeForce GTX 460M (4,282, +1.2%).
The R7 M260's Vulkan score of 5,289 is 42.7% higher than its OpenCL score of 3,708, suggesting the GCN 3.0 architecture performs significantly better under Vulkan's lower-overhead API. The RTX 4070 GDDR6 sits 0.6% below the Iris Pro 5200 and 1.2% above the GTX 460M in its single benchmark, but these are all low-end mobile parts — the database does not contain comparable high-end desktop scores for context.
The percentile ranks tell a cautionary tale: both cards sit in the bottom quartile (26th and 25th percentiles). For the RTX 4070 GDDR6, this reflects the singular Steel Nomad workload, which is a demanding DX12 test. For the R7 M260, it reflects its age and limited feature set.
Where Each One Wins
The RTX 4070 GDDR6 wins decisively in every architectural metric. Its FP32 throughput of 29.15 TFLOPS is 38.7 times the R7 M260's 752.6 GFLOPS. Its texture rate of 455.4 GTexel/s is 19.4 times higher than 23.52 GTexel/s. Its pixel rate of 158.4 GPixel/s is 20.2 times higher than 7.840 GPixel/s. Memory bandwidth is 33.3 times higher at 480.0 GB/s versus 14.40 GB/s.
The NVIDIA card also wins on modern feature support. It has 46 RT cores for ray tracing and 184 tensor cores for AI acceleration — the R7 M260 has neither. Its DirectX 12 Ultimate (12_2) support enables hardware-accelerated ray tracing and variable rate shading, while the R7 M260's DirectX 12 (12_0) lacks these features. The RTX 4070 GDDR6's PCIe 4.0 x16 interface provides 8 times the lane width and double the generation bandwidth versus the R7 M260's PCIe 3.0 x8.
The R7 M260 wins only in power efficiency per transistor density, which is a manufacturing metric rather than a performance one. Its 12.4M transistors per mm² is lower than the RTX 4070 GDDR6's 121.8M per mm², meaning the AMD chip is less dense. However, the R7 M260's lack of a listed TDP suggests it draws far less power than the RTX 4070 GDDR6's 200 W — but the data does not provide a number to confirm this.
For use cases: the RTX 4070 GDDR6 is the only choice for ray-traced gaming, AI inference workloads (via tensor cores), high-resolution texture rendering (12 GB memory), and modern API support (Vulkan 1.4). The R7 M260's 2 GB DDR3 memory and 64-bit bus limit it to legacy applications, basic display output, and low-resolution 2D workloads. The R7 M260's Vulkan score of 5,289 suggests it handles older Vulkan titles adequately, but its OpenCL score of 3,708 indicates weaker compute performance. The RTX 4070 GDDR6's single 3DMark Steel Nomad score of 4,334.5, while low in absolute terms, reflects a far more demanding test than the R7 M260's Geekbench workloads.
In short, the R7 M260 belongs in a 2014-era laptop for basic productivity. The RTX 4070 GDDR6 belongs in a modern desktop for serious gaming and compute. The data shows no scenario where the AMD card outperforms the NVIDIA card in any measurable specification.