AMD Radeon R5 M230 vs NVIDIA GeForce RTX 4070 GDDR6 Comparison

AMD
RADEON

AMD Radeon R5 M230

CORE STATE Jet
VRAM 2 GB
CLOCK SPEED —
TDP —
BUS WIDTH 64 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2014
VS
NVIDIA
GEFORCE

GeForce RTX 4070 GDDR6

CORE STATE AD104
VRAM 12 GB
CLOCK SPEED 2475 MHz
TDP 200 W
BUS WIDTH 192 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
4,577
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,334.5

Analysis: AMD Radeon R5 M230 vs NVIDIA GeForce RTX 4070 GDDR6

# AMD Radeon R5 M230 vs NVIDIA GeForce RTX 4070 GDDR6

The AMD Radeon R5 M230 and NVIDIA GeForce RTX 4070 GDDR6 occupy completely different corners of the GPU landscape. The R5 M230 is a 2014-era integrated-class part built on GCN 1.0, while the RTX 4070 GDDR6 is a 2024 discrete card from the Ada Lovelace generation. Benchmark data shows both parts landing near the 25th percentile of all GPUs, but for opposite reasons: the R5 M230 scores 4577 in Geekbench OpenCL against a field of older mobile parts, while the RTX 4070 GDDR6 scores 4334.5 in 3DMark Steel Nomad DX12 against a weaker comparison set. The specification gap is enormous — 320 shading units versus 5888, 16 GB/s versus 480 GB/s memory bandwidth — and the use cases could not be more different.

FAQ

Q: Which GPU has the higher benchmark score?

A: The AMD Radeon R5 M230 posts an average benchmark score of 4577 in Geekbench OpenCL, while the NVIDIA GeForce RTX 4070 GDDR6 scores 4334.5 in 3DMark Steel Nomad DX12. These are different test suites, so direct comparison is not meaningful, but the R5 M230's percentile rank of 27 vs the RTX 4070's 25 shows both sit near the same overall percentile among all GPUs.

Q: What is the memory configuration difference?

A: The R5 M230 uses 2 GB of DDR3 memory on a 64-bit bus, delivering 16.00 GB/s bandwidth. The RTX 4070 GDDR6 has 12 GB of GDDR6 memory on a 192-bit bus, delivering 480.0 GB/s — a 30x bandwidth advantage.

Q: Which GPU supports newer graphics APIs?

A: The RTX 4070 GDDR6 supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the R5 M230 supports DirectX 12 (11_1) and Vulkan 1.2.170. Both support OpenGL 4.6.

Q: What are the physical dimensions of the RTX 4070 GDDR6?

A: The RTX 4070 GDDR6 measures 240 mm in length, 110 mm in height, and 40 mm in width, making it a dual-slot card requiring one 16-pin power connector and a suggested 550 W power supply.

Q: Does the R5 M230 have ray tracing or tensor cores?

A: No. The R5 M230 has no RT or tensor cores listed. The RTX 4070 GDDR6 includes 46 ray tracing cores and 184 tensor cores.

Q: What is the production status of each GPU?

A: Both are end-of-life. The R5 M230 was released on 2014-01-06, and the RTX 4070 GDDR6 was released on 2024-08-19.

Where Each One Wins

The R5 M230 wins in scenarios where power draw and physical footprint are the primary constraints. As an integrated graphics processor with an IGP slot width, it requires no separate power connectors and fits into portable devices where the display outputs are "Portable Device Dependent." Its 28 nm process and 690 million transistors make it a low-complexity part that can be embedded into a system without expansion card considerations. For legacy applications and older DirectX 11-era workloads, the R5 M230's GCN 1.0 architecture with 320 shading units and 8 ROPs provides baseline 3D acceleration that matches or exceeds other GPUs in its class — its nearest rivals include the AMD Radeon RX 560 (0.2% ahead), Intel HD Graphics P530 (0.4% ahead), and NVIDIA Quadro M3000M (0.9% behind).

The RTX 4070 GDDR6 wins decisively in raw compute, memory throughput, and modern feature support. Its 5888 shading units, 184 TMUs, and 64 ROPs deliver pixel rates of 158.4 GPixel/s and texture rates of 455.4 GTexel/s — figures that dwarf the R5 M230's 4.880 GPixel/s and 12.20 GTexel/s. The 29.15 TFLOPS FP32 performance and 46 RT cores make it suitable for ray-traced workloads and compute-heavy applications. Its 12 GB GDDR6 memory with 480.0 GB/s bandwidth handles large textures and datasets that would exhaust the R5 M230's 2 GB DDR3 pool. The RTX 4070 GDDR6 also supports PCIe 4.0 x16 interface versus the R5 M230's PCIe 3.0 x8, and its display outputs include HDMI 2.1 and three DisplayPort 1.4a connectors for modern multi-monitor setups.

Architecture Differences

The R5 M230 is built on GCN 1.0 architecture using a 28 nm process at TSMC, with a die size of 56 mm² and 690 million transistors. The RTX 4070 GDDR6 uses Ada Lovelace architecture on a 5 nm TSMC process, with a die size of 294 mm² and 35,800 million transistors. Transistor density tells the story of process advancement: the R5 M230 packs 12.3M transistors per mm², while the RTX 4070 GDDR6 achieves 121.8M per mm² — a 10x density improvement.

The R5 M230's GCN 1.0 design has no dedicated ray tracing or tensor cores. It relies on 320 shading units arranged in a traditional compute unit layout, with 20 TMUs and 8 ROPs. The RTX 4070 GDDR6, by contrast, includes 5888 shading units, 184 TMUs, 64 ROPs, 46 RT cores, and 184 tensor cores. This adds hardware acceleration for ray tracing and AI-based workloads like DLSS, which the R5 M230 cannot perform.

API support also reflects the architectural divide. The R5 M230 lists DirectX 12 (11_1) and Vulkan 1.2.170, while the RTX 4070 GDDR6 lists DirectX 12 Ultimate (12_2) and Vulkan 1.4. Both support OpenGL 4.6, but the newer API versions on the RTX 4070 GDDR6 unlock features like mesh shaders and variable rate shading.

The memory subsystem differs fundamentally. The R5 M230 uses DDR3 memory at 1000 MHz (2 Gbps effective) on a 64-bit bus, yielding 16.00 GB/s bandwidth. The RTX 4070 GDDR6 uses GDDR6 at 2500 MHz (20 Gbps effective) on a 192-bit bus, yielding 480.0 GB/s — a 30x difference that massively impacts texture streaming and high-resolution rendering.

Specification Differences

The two GPUs differ in every major specification category:

  • Process Node: R5 M230 uses 28 nm; RTX 4070 GDDR6 uses 5 nm
  • Transistors: 690 million vs 35,800 million
  • Die Size: 56 mm² vs 294 mm²
  • Shading Units: 320 vs 5888
  • TMUs: 20 vs 184
  • ROPs: 8 vs 64
  • RT Cores: None vs 46
  • Tensor Cores: None vs 184
  • Pixel Rate: 4.880 GPixel/s vs 158.4 GPixel/s
  • Texture Rate: 12.20 GTexel/s vs 455.4 GTexel/s
  • FP32: 390.4 GFLOPS vs 29.15 TFLOPS
  • FP16: Not listed vs 29.15 TFLOPS (1:1)
  • Memory Size: 2 GB vs 12 GB
  • Memory Type: DDR3 vs GDDR6
  • Memory Bus: 64 bit vs 192 bit
  • Memory Bandwidth: 16.00 GB/s vs 480.0 GB/s
  • Base Clock: Not listed vs 1920 MHz
  • Boost Clock: Not listed vs 2475 MHz
  • Memory Clock: 1000 MHz (2 Gbps effective) vs 2500 MHz (20 Gbps effective)
  • TDP: Not listed vs 200 W
  • Slot Width: IGP vs Dual-slot
  • Power Connectors: None vs 1x 16-pin
  • Suggested PSU: None vs 550 W
  • Bus Interface: PCIe 3.0 x8 vs PCIe 4.0 x16
  • Display Outputs: Portable Device Dependent vs 1x HDMI 2.1, 3x DisplayPort 1.4a
  • Dimensions: Not listed vs 240 mm x 110 mm x 40 mm
  • Release Date: 2014-01-06 vs 2024-08-19

Head-to-Head Benchmarks

There are no direct head-to-head benchmark results between the R5 M230 and RTX 4070 GDDR6 in the data. Each GPU was tested under different benchmark suites, and the wins count is 0 for both. However, the available scores provide context for each part's standing among its peers.

The R5 M230's Geekbench OpenCL score of 4577 places it 0.2% behind the AMD Radeon RX 560 (4569 average score) and 0.4% behind the Intel HD Graphics P530 (4560). It is 0.9% ahead of the NVIDIA Quadro M3000M (4621 average score) and 1.1% ahead of the NVIDIA GeForce GTX 970M (4628). This cluster of scores — all within 1.2% of each other — indicates that the R5 M230 performs at parity with mid-range mobile GPUs from its era.

The RTX 4070 GDDR6's 3DMark Steel Nomad DX12 score of 4334.5 places it 0.6% behind the Intel Iris Pro Graphics 5200 (4360 average score) and 1.2% behind the NVIDIA GeForce 930M (4388). It is 0.9% ahead of the AMD FirePro W2100 (4295) and 1.2% ahead of the NVIDIA GeForce GTX 460M (4282). These rival scores are notably low for a modern GPU class, reflecting that the Steel Nomad benchmark's comparison pool includes older integrated and entry-level parts.

The percentile ranks confirm this pattern. The R5 M230 sits at the 27th percentile of all GPUs, while the RTX 4070 GDDR6 sits at the 25th percentile. This means both parts land in the lower quarter of the overall GPU distribution, despite the RTX 4070 GDDR6's vastly superior absolute specifications. The difference is the benchmark context: the R5 M230's nearest rivals are primarily mobile and integrated GPUs from around 2014-2016, while the RTX 4070 GDDR6's comparison set includes much older or lower-tier parts.

The Verdict

The benchmark data presents a clear split. The AMD Radeon R5 M230 is a legacy integrated GPU whose 4577 Geekbench OpenCL score places it alongside the AMD Radeon RX 560 (4569) and Intel HD Graphics P530 (4560). It belongs in thin-and-light devices where the IGP form factor, no power connector requirement, and portable-device-dependent display outputs are the defining constraints. Users who need basic 3D acceleration for older DirectX 11-era software and do not require discrete expansion slots would find it adequate.

The NVIDIA GeForce RTX 4070 GDDR6 is a modern discrete card with 12 GB GDDR6 memory, 5888 shading units, 46 RT cores, and 184 tensor cores. Its 4334.5 3DMark Steel Nomad DX12 score, while low in absolute percentile terms, comes from a benchmark that stresses DirectX 12 Ultimate features that the R5 M230 cannot run. The RTX 4070 GDDR6's 480.0 GB/s memory bandwidth, 158.4 GPixel/s pixel rate, and 29.15 TFLOPS FP32 performance make it suitable for ray-traced gaming, content creation, and compute workloads. It requires a dual-slot expansion slot, one 16-pin power connector, and a 550 W power supply, with physical dimensions of 240 mm length, 110 mm height, and 40 mm width.

The choice between these two GPUs is not a matter of benchmark scores — it is a matter of platform and workload. The R5 M230 is the only option for a system that cannot accommodate a discrete card, while the RTX 4070 GDDR6 is the clear pick for any build where performance and modern features matter. The data does not support any scenario where the R5 M230 would outperform the RTX 4070 GDDR6 in compute, memory bandwidth, or feature support. It simply occupies a different product category with different physical and power requirements.

DETAILED SPECIFICATIONS

SPECIFICATION
R5 M230
RTX 4070 GDDR6
Core Specs
Shading Units
320
5,888 +1740.0%
Shaders
320
5,888 +1740.0%
TMUs
20
184 +820.0%
ROPs
8
64 +700.0%
Compute Units
5
—
SM Count
—
46
Clocks
Base Clock
—
1920 MHz
Boost Clock
—
2475 MHz
GPU Clock
610 MHz
—
Memory Clock
1000 MHz 2 Gbps effective
2500 MHz 20 Gbps effective
Memory
Memory Size
2 GB
12 GB
VRAM (MB)
2,048
12,288 +500.0%
Memory Type
DDR3
GDDR6
Memory Bus
64 bit
192 bit
Bandwidth
16.00 GB/s
480.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
128 KB
36 MB
Performance
Pixel Rate
4.880 GPixel/s
158.4 GPixel/s
Texture Rate
12.20 GTexel/s
455.4 GTexel/s
FP32 (TFLOPS)
390.4 GFLOPS
29.15 TFLOPS
FP64 (TFLOPS)
24.40 GFLOPS (1:16)
455.4 GFLOPS (1:64)
FP16 (TFLOPS)
—
29.15 TFLOPS (1:1)
AI/RT
RT Cores
—
46
Tensor Cores
—
184
Power
TDP
—
200 W
TDP (W)
—
200
Suggested PSU
—
550 W
Power Connectors
—
1x 16-pin
Architecture
Architecture
GCN 1.0
Ada Lovelace
GPU Name
Jet
AD104
Generation
Gem System (R5 M200)
GeForce 40
Process Size
28 nm
5 nm
Transistors
690 million
35,800 million
Die Size
56 mm²
294 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
121.8M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
3.0
CUDA
—
8.9
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
110 mm 4.3 inches
Outputs
Portable Device Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 3.0 x8
PCIe 4.0 x16
Other
Launch Price
—
599 USD
Production
End-of-life
End-of-life
Predecessor
Solar System
GeForce 30
Successor
Polaris Mobile
GeForce 50
View Radeon R5 M230 Details View GeForce RTX 4070 GDDR6 Details