AMD Radeon Pro WX 2100 vs NVIDIA GeForce GTX 560 Ti Comparison

AMD
RADEON

AMD Radeon Pro WX 2100

CORE STATE Lexa
VRAM 2 GB
CLOCK SPEED 1219 MHz
TDP 35 W
BUS WIDTH 64 bit
ARCHITECTURE GCN 4.0
nm
PROCESS 14 nm
LAUNCH DATE 2017
VS
NVIDIA
GEFORCE

GeForce GTX 560 Ti

CORE STATE GF114
VRAM 1024 MB
CLOCK SPEED —
TDP 170 W
BUS WIDTH 256 bit
ARCHITECTURE Fermi 2.0
nm
PROCESS 40 nm
LAUNCH DATE 2011

PERFORMANCE BENCHMARKS

geekbench_opencl
8,536
10,690
geekbench_vulkan
10,770
N/A

Analysis: AMD Radeon Pro WX 2100 vs NVIDIA GeForce GTX 560 Ti

Head-to-Head Benchmarks

The only shared benchmark in the database is Geekbench OpenCL, and the result is decisive. The NVIDIA GeForce GTX 560 Ti scores 10,690 points, while the AMD Radeon Pro WX 2100 scores 8,536 points. That gives the GTX 560 Ti a 25.2% lead. This is not a small margin; it is a substantial performance gap in raw compute throughput.

Looking at the broader database context, the GTX 560 Ti sits at the 49th percentile of all GPUs, with an average benchmark score of 10,690. Its nearest rivals include the AMD Radeon RX 6600S at 10,629 (0.6% behind), the NVIDIA Quadro K2200 at 10,761 (0.7% ahead), the AMD Radeon R9 M275X at 10,582 (1% behind), and the AMD Radeon Pro 450 at 10,804 (1.1% ahead). The GTX 560 Ti is essentially in a tight cluster; its score is within roughly 1% of all four of those cards.

The Radeon Pro WX 2100, by contrast, sits at the 46th percentile, with an average benchmark score of 9,653. Its nearest rivals are the NVIDIA GeForce GTX 960M at 9,645 (0.1% behind), the NVIDIA Quadro P4000 at 9,665 (0.1% ahead), the NVIDIA Quadro K5000 at 9,637 (0.2% behind), and the NVIDIA Tesla C2070 at 9,716 (0.6% ahead). The WX 2100 is also in a tight cluster, but that cluster is roughly 1,000 points lower than the GTX 560 Ti’s cluster.

The head-to-head delta of 25.2% is far larger than any delta within either card’s nearest-rival group. In other words, the two cards are not competing in the same performance tier according to the database; the GTX 560 Ti is one full tier above the WX 2100 in OpenCL compute. The WX 2100 does have a separate Geekbench Vulkan score of 10,770, but the GTX 560 Ti has no recorded Vulkan score, so no direct comparison can be made in that API.

Benchmark results indicate that the GTX 560 Ti wins the only head-to-head test available, and it wins by a wide margin. The WX 2100’s OpenCL score is not close enough to call it competitive in compute workloads.

Architecture Differences

The two cards come from different manufacturers, different eras, and different design philosophies. The GTX 560 Ti uses the GF114 chip, built on NVIDIA’s Fermi 2.0 architecture, part of the GeForce 500 generation. The WX 2100 uses the Lexa chip, built on AMD’s GCN 4.0 architecture, part of the Radeon Pro Polaris (WX x100) generation.

The manufacturing process tells a large part of the story. The GTX 560 Ti is fabricated on a 40 nm process at TSMC, with 1,950 million transistors on a 332 mm² die, giving a transistor density of 5.9 million transistors per square millimeter. The WX 2100 is fabricated on a 14 nm process at GlobalFoundries, with 2,200 million transistors on a 103 mm² die, giving a transistor density of 21.4 million per square millimeter. The WX 2100 packs more transistors into far less silicon, which explains its dramatically lower power draw.

Shading unit counts differ as well. The GTX 560 Ti has 384 shading units, 64 texture mapping units, and 32 ROPs. The WX 2100 has 512 shading units, 32 TMUs, and 16 ROPs. The WX 2100 has one-third more shading units, but half the TMUs and half the ROPs. That imbalance shows up in the texture and pixel rates: the GTX 560 Ti achieves 52.67 GTexel/s and 13.17 GPixel/s, while the WX 2100 achieves 39.01 GTexel/s and 19.50 GPixel/s. The GTX 560 Ti is faster at texturing, the WX 2100 is faster at pixel filling.

Memory configurations are starkly different. The GTX 560 Ti has 1,024 MB of GDDR5 on a 256-bit bus, with a memory clock of 1,002 MHz (4 Gbps effective) and bandwidth of 128.3 GB/s. The WX 2100 has 2 GB of GDDR5 on a 64-bit bus, with a memory clock of 1,500 MHz (6 Gbps effective) and bandwidth of 48.00 GB/s. The GTX 560 Ti has more than 2.6 times the memory bandwidth, despite having half the capacity. The WX 2100’s narrow bus is a clear bottleneck for memory-heavy tasks.

Compute throughput is nearly identical on paper. The GTX 560 Ti delivers 1,263.4 GFLOPS FP32, while the WX 2100 delivers 1,248.3 GFLOPS FP32. That is a difference of about 1.2%, yet the OpenCL benchmark shows a 25.2% difference in favor of the GTX 560 Ti. This suggests the WX 2100’s memory bandwidth limitation or driver/API overhead is holding back its real-world compute performance. The WX 2100 also supports FP16 at 1,248.3 GFLOPS (1:1 ratio), which the GTX 560 Ti does not record at all.

Power and physical design are where the WX 2100 pulls far ahead. The GTX 560 Ti has a TDP of 170 W, requires two 6-pin power connectors, and a suggested PSU of 450 W. It is a dual-slot card, 229 mm long (9 inches). The WX 2100 has a TDP of 35 W, requires no power connectors, and a suggested PSU of 200 W. It is a single-slot card, 168 mm long (6.6 inches) and 69 mm high (2.7 inches). The WX 2100 draws less than one-fifth the power of the GTX 560 Ti.

Bus interface also differs. The GTX 560 Ti uses PCIe 2.0 x16, while the WX 2100 uses PCIe 3.0 x8. The newer standard and lower lane count roughly balance out in bandwidth, but the WX 2100 has access to newer PCIe features.

API support shows the WX 2100’s newer architecture. Both cards support DirectX 12, but the GTX 560 Ti is limited to feature level 11_0, while the WX 2100 supports feature level 12_0. OpenGL is identical at 4.6 for both. Vulkan is where the WX 2100 is clearly ahead: it supports Vulkan 1.3, while the GTX 560 Ti has no Vulkan support recorded in the database.

Display outputs also differ. The GTX 560 Ti offers 2x DVI and 1x mini-HDMI 1.3a. The WX 2100 offers 1x DisplayPort 1.4a and 2x mini-DisplayPort 1.4a. The WX 2100 is clearly designed for modern displays, while the GTX 560 Ti reflects the DVI-centric era of its release.

The Verdict

The data is clear: for raw OpenCL compute, the GTX 560 Ti wins by 25.2%. It also wins on texture rate, memory bandwidth, and has a much wider memory bus. If the only metric is the recorded benchmark, the GTX 560 Ti is the stronger card.

However, the WX 2100 wins on nearly every modern feature and efficiency metric. It draws 35 W versus 170 W, requires no auxiliary power connectors, fits in a single slot, and supports Vulkan 1.3 and DirectX 12 feature level 12_0. The GTX 560 Ti cannot run Vulkan at all, and its DirectX 12 support is limited to feature level 11_0.

The WX 2100 also has double the memory capacity (2 GB versus 1 GB), which matters for modern workloads that exceed 1 GB. Its pixel rate is higher (19.50 GPixel/s versus 13.17 GPixel/s), and it supports FP16 compute, which the GTX 560 Ti does not record.

The verdict depends on the use case. For pure compute in legacy or OpenCL-only environments, the GTX 560 Ti is the better performer. For any modern workload that uses Vulkan, requires more than 1 GB of memory, or must fit into a low-power, single-slot chassis, the WX 2100 is the only sensible choice.

FAQ

Q: Which card is faster in Geekbench OpenCL?

A: The NVIDIA GeForce GTX 560 Ti scores 10,690, while the AMD Radeon Pro WX 2100 scores 8,536. The GTX 560 Ti is 25.2% faster in this test.

Q: Does the AMD Radeon Pro WX 2100 support Vulkan?

A: Yes, it supports Vulkan 1.3. The GTX 560 Ti has no Vulkan support recorded in the database.

Q: How much memory does each card have?

A: The GTX 560 Ti has 1,024 MB of GDDR5 on a 256-bit bus. The WX 2100 has 2 GB of GDDR5 on a 64-bit bus.

Q: What is the power draw difference?

A: The GTX 560 Ti has a TDP of 170 W and needs two 6-pin power connectors. The WX 2100 has a TDP of 35 W and requires no power connectors.

Q: Which card has higher memory bandwidth?

A: The GTX 560 Ti has 128.3 GB/s of bandwidth, while the WX 2100 has 48.00 GB/s. The GTX 560 Ti offers more than 2.6 times the bandwidth.

Q: What DirectX feature levels do the cards support?

A: The GTX 560 Ti supports DirectX 12 (11_0), while the WX 2100 supports DirectX 12 (12_0). The WX 2100 has a higher feature level.

Where Each One Wins

The GTX 560 Ti wins in OpenCL compute, with a 25.2% higher score. It also wins in texture rate (52.67 GTexel/s versus 39.01 GTexel/s) and memory bandwidth (128.3 GB/s versus 48.00 GB/s). Its 256-bit memory bus is a major advantage for any workload that streams large amounts of data. The GTX 560 Ti also has more TMUs (64 versus 32) and more ROPs (32 versus 16), which helps in traditional rasterization scenarios.

The WX 2100 wins in pixel rate, achieving 19.50 GPixel/s versus the GTX 560 Ti’s 13.17 GPixel/s. It also wins on memory capacity with 2 GB versus 1 GB, which is critical for modern textures or compute datasets that exceed the GTX 560 Ti’s limit. The WX 2100 supports Vulkan 1.3, while the GTX 560 Ti has no Vulkan support. It also supports DirectX 12 feature level 12_0, higher than the GTX 560 Ti’s 11_0. The WX 2100’s FP16 capability (1,248.3 GFLOPS) is not available on the GTX 560 Ti. Finally, the WX 2100 wins on power efficiency by a massive margin: 35 W versus 170 W, with no power connectors required.

For workloads that are memory-bandwidth-bound or texture-heavy, the GTX 560 Ti is the stronger choice. For workloads that are pixel-bound, need more than 1 GB of VRAM, use Vulkan, or operate in a constrained power envelope, the WX 2100 is the better fit.

Specification Differences

| Specification | NVIDIA GeForce GTX 560 Ti | AMD Radeon Pro WX 2100 |

|---|---|---|

| Chip | GF114 | Lexa |

| Architecture | Fermi 2.0 | GCN 4.0 |

| Generation | GeForce 500 | Radeon Pro Polaris (WX x100) |

| Process Node | 40 nm | 14 nm |

| Foundry | TSMC | GlobalFoundries |

| Transistors | 1,950 million | 2,200 million |

| Die Size | 332 mm² | 103 mm² |

| Transistor Density | 5.9M / mm² | 21.4M / mm² |

| Base Clock | Not recorded | 925 MHz |

| Boost Clock | Not recorded | 1,219 MHz |

| Memory Clock | 1,002 MHz (4 Gbps effective) | 1,500 MHz (6 Gbps effective) |

| Memory Size | 1,024 MB | 2 GB |

| Memory Bus Width | 256 bit | 64 bit |

| Memory Bandwidth | 128.3 GB/s | 48.00 GB/s |

| Shading Units | 384 | 512 |

| TMUs | 64 | 32 |

| ROPs | 32 | 16 |

| Pixel Rate | 13.17 GPixel/s | 19.50 GPixel/s |

| Texture Rate | 52.67 GTexel/s | 39.01 GTexel/s |

| FP32 Performance | 1,263.4 GFLOPS | 1,248.3 GFLOPS |

| FP16 Performance | Not recorded | 1,248.3 GFLOPS (1:1) |

| TDP | 170 W | 35 W |

| Slot Width | Dual-slot | Single-slot |

| Power Connectors | 2x 6-pin | None |

| Suggested PSU | 450 W | 200 W |

| Bus Interface | PCIe 2.0 x16 | PCIe 3.0 x8 |

| Display Outputs | 2x DVI, 1x mini-HDMI 1.3a | 1x DisplayPort 1.4a, 2x mini-DisplayPort 1.4a |

| DirectX | 12 (11_0) | 12 (12_0) |

| Vulkan | Not recorded | 1.3 |

| Length | 229 mm (9 inches) | 168 mm (6.6 inches) |

| Height | Not recorded | 69 mm (2.7 inches) |

| Launch MSRP | 249 USD | 149 USD |

| Release Date | 2011-01-24 | 2017-06-03 |

DETAILED SPECIFICATIONS

SPECIFICATION
Pro WX 2100
GTX 560 Ti
Core Specs
Shading Units
512
384 -25.0%
Shaders
512
384 -25.0%
TMUs
32
64 +100.0%
ROPs
16
32 +100.0%
Compute Units
8
—
SM Count
—
8
Clocks
Base Clock
925 MHz
—
Boost Clock
1219 MHz
—
GPU Clock
—
823 MHz
Shader Clock
—
1645 MHz
Memory Clock
1500 MHz 6 Gbps effective
1002 MHz 4 Gbps effective
Memory
Memory Size
2 GB
1024 MB
VRAM (MB)
2,048
1,024 -50.0%
Memory Type
GDDR5
GDDR5
Memory Bus
64 bit
256 bit
Bandwidth
48.00 GB/s
128.3 GB/s
Cache
L1 Cache
16 KB (per CU)
64 KB (per SM)
L2 Cache
256 KB
512 KB
Performance
Pixel Rate
19.50 GPixel/s
13.17 GPixel/s
Texture Rate
39.01 GTexel/s
52.67 GTexel/s
FP32 (TFLOPS)
1,248.3 GFLOPS
1,263.4 GFLOPS
FP64 (TFLOPS)
78.02 GFLOPS (1:16)
105.3 GFLOPS (1:12)
FP16 (TFLOPS)
1,248.3 GFLOPS (1:1)
—
Power
TDP
35 W
170 W
TDP (W)
35
170 +385.7%
Suggested PSU
200 W
450 W
Power Connectors
None
2x 6-pin
Architecture
Architecture
GCN 4.0
Fermi 2.0
GPU Name
Lexa
GF114
Generation
Radeon Pro Polaris (WX x100)
GeForce 500
Process Size
14 nm
40 nm
Transistors
2,200 million
1,950 million
Die Size
103 mm²
332 mm²
Foundry
GlobalFoundries
TSMC
Density
21.4M / mm²
5.9M / mm²
API Support
DirectX
12 (12_0)
12 (11_0)
OpenGL
4.6
4.6
Vulkan
1.3
—
OpenCL
2.1
1.1
CUDA
—
2.1
Shader Model
6.7
5.1
Physical
Slot Width
Single-slot
Dual-slot
Length
168 mm 6.6 inches
229 mm 9 inches
Height
69 mm 2.7 inches
—
Outputs
1x DisplayPort 1.4a2x mini-DisplayPort 1.4a
2x DVI1x mini-HDMI 1.3a
Bus Interface
PCIe 3.0 x8
PCIe 2.0 x16
Other
Launch Price
149 USD
249 USD
Production
End-of-life
End-of-life
Predecessor
Radeon Pro GCN
GeForce 400
Successor
Radeon Pro Vega
GeForce 600
View Radeon Pro WX 2100 Details View GeForce GTX 560 Ti Details