AMD Radeon Pro WX 2100 vs AMD Radeon R7 M380 Comparison
AMD Radeon Pro WX 2100
Radeon R7 M380
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Pro WX 2100 vs AMD Radeon R7 M380
The AMD Radeon Pro WX 2100 and the AMD Radeon R7 M380 occupy the same 46th percentile in the global GPU benchmark distribution, yet they approach that standing from opposite directions. The R7 M380 is a mobile-oriented part built on an older architecture with a wider memory bus, while the WX 2100 is a professional desktop card with a newer process node and higher clock speeds. The single head-to-head benchmark available shows the R7 M380 leading, but the underlying specifications reveal a more nuanced split between compute throughput, memory bandwidth, and feature support.
Where Each One Wins
The data splits cleanly along workload type. The AMD Radeon R7 M380 wins the only direct comparison, posting a Geekbench OpenCL score of 9313 against the WX 2100’s 8536, a margin of 8.3%. That advantage comes primarily from its larger memory pool and wider bus. With 4 GB of DDR3 on a 128-bit interface, the M380 offers 32.00 GB/s of bandwidth, which is less than the WX 2100’s 48.00 GB/s, but its 4 GB capacity gives it more headroom for datasets that exceed the 2 GB ceiling of the professional card. In OpenCL compute tasks that are capacity-bound rather than bandwidth-bound, the M380 holds the edge.
The AMD Radeon Pro WX 2100 counters in raw throughput categories. Its 512 shading units run at a 1219 MHz boost clock, yielding 1,248.3 GFLOPS of FP32 and matching FP16 performance at a 1:1 ratio. The M380 has more shading units at 640, but they clock lower at 915 MHz boost, producing 1,171.2 GFLOPS of FP32 and no FP16 support at all. The WX 2100 also leads in pixel fill rate at 19.50 GPixel/s versus 14.64 GPixel/s, and in texture fill rate at 39.01 GTexel/s versus 36.60 GTexel/s. For workloads that hammer the ALUs or rely on rasterization throughput, the WX 2100 is the stronger card.
The WX 2100 also wins on API maturity. It supports DirectX 12 (12_0) and Vulkan 1.3, while the M380 is limited to DirectX 12 (11_1) and Vulkan 1.2.170. Both cards offer OpenGL 4.6. For modern compute or graphics applications that take advantage of newer API features, the WX 2100 is the safer bet.
Architecture Differences
The two GPUs come from different eras of AMD’s design philosophy. The Radeon Pro WX 2100 uses the Lexa chip, built on GCN 4.0 architecture and manufactured on a 14 nm process at GlobalFoundries. It packs 2,200 million transistors into a 103 mm² die, achieving a transistor density of 21.4 million per square millimeter. The Radeon R7 M380 uses the Tropo chip, based on the much older GCN 1.0 architecture, fabricated on a 28 nm process at TSMC. It contains 1,500 million transistors spread across a larger 123 mm² die, resulting in a lower density of 12.2 million per square millimeter. The process node advantage explains why the WX 2100 can deliver higher clock speeds and better fill rates from fewer transistors.
Memory configurations diverge sharply. The WX 2100 uses 2 GB of GDDR5 on a 64-bit bus, running at 1500 MHz with 6 Gbps effective, for a bandwidth of 48.00 GB/s. The M380 uses 4 GB of DDR3 on a 128-bit bus, running at 1000 MHz with 2 Gbps effective, for a bandwidth of 32.00 GB/s. The M380 has double the capacity but 33% less bandwidth. The WX 2100’s GDDR5 provides a memory speed advantage that matters for streaming textures or compute kernels, while the M380’s larger pool suits workloads with large working sets that fit within 4 GB.
The bus interface also differs: the WX 2100 runs at PCIe 3.0 x8, while the M380 runs at PCIe 3.0 x16. For a professional card designed for workstation tasks, the narrower x8 link is a deliberate trade-off given the 35 W TDP and single-slot form factor with no power connectors. The M380 has no published TDP, slot width, or power connector data, indicating it was intended as an integrated or semi-integrated mobile solution rather than a standalone card.
Feature sets reflect their target markets. The WX 2100 includes professional display outputs with 1x DisplayPort 1.4a and 2x mini-DisplayPort 1.4a, supporting modern monitors and multi-display setups. The M380 lists no display outputs at all, reinforcing its role as an OEM or laptop component. The WX 2100 also has a defined 168 mm length and 69 mm height, making it a compact single-slot card, while the M380 has no physical dimensions listed.
Head-to-Head Benchmarks
The only direct comparison in the data is Geekbench OpenCL, where the R7 M380 scores 9313 against the WX 2100’s 8536. That is an 8.3% deficit for the professional card. The M380’s victory here is notable because it achieves it with lower FP32 throughput (1,171.2 GFLOPS vs 1,248.3 GFLOPS) and lower texture fill rate (36.60 GTexel/s vs 39.01 GTexel/s). The likely explanation is the memory configuration: 4 GB of DDR3 on a 128-bit bus allows larger buffers and more parallel memory transactions than the WX 2100’s 2 GB on a 64-bit bus, even though the raw bandwidth is lower. OpenCL workloads often scale with memory capacity and access patterns, not just raw compute.
The WX 2100’s wins are in the specification sheet rather than a direct benchmark. Its FP32 output of 1,248.3 GFLOPS is 6.6% higher than the M380’s 1,171.2 GFLOPS. Its pixel rate of 19.50 GPixel/s is 33% higher than the M380’s 14.64 GPixel/s. Its texture rate of 39.01 GTexel/s is 6.6% higher than the M380’s 36.60 GTexel/s. Bandwidth is another clear win: 48.00 GB/s versus 32.00 GB/s, a 50% advantage for the WX 2100. These numbers suggest that in synthetic rasterization tests or compute kernels that are ALU-bound, the WX 2100 would outperform the M380, even though no such benchmark appears in the dataset.
The nearest rival data places both cards in similar company. The WX 2100’s average benchmark score is 9653, sitting between the NVIDIA Quadro P4000 at 9665 (0.1% ahead) and the NVIDIA Quadro K5000 at 9637 (0.2% behind). The M380’s average score is 9313, which is 0.1% ahead of the NVIDIA GeForce GTX 850M at 9302 and 1% ahead of the AMD Radeon Vega 8 at 9221. Both cards are clustered in a narrow performance band where single-digit percentage differences separate them from immediate competitors.
The Verdict
The data supports a clear split. For compute workloads that fit within 2 GB and favor high clock speeds, FP16 throughput, and modern API support, the AMD Radeon Pro WX 2100 is the better choice. Its 1,248.3 GFLOPS FP32 and matching FP16 capability, combined with Vulkan 1.3 and DirectX 12 (12_0), make it suitable for modern professional applications that leverage these features. The 48.00 GB/s bandwidth and 19.50 GPixel/s pixel rate also give it an edge in texture-heavy or rasterization-bound tasks.
For OpenCL workloads that require more than 2 GB of memory, the AMD Radeon R7 M380 is the winner. Its 4 GB capacity and 128-bit bus allow it to handle larger datasets, and its 9313 OpenCL score confirms that advantage in practice. The 8.3% lead over the WX 2100 in the head-to-head test is substantial enough to matter for users whose primary workload is OpenCL compute. The M380 also holds a slight edge in shading unit count at 640 versus 512, which can help in certain parallel workloads despite the lower clock speed.
The WX 2100 carries a launch MSRP of 149 USD, while the M380 has no listed launch price, but both cards are end-of-life products. The WX 2100 is a professional tool with defined physical dimensions, display outputs, and a 35 W TDP, making it a drop-in workstation component. The M380 has no such specifications, indicating it was always a mobile or OEM part. Users building or upgrading a desktop workstation should favor the WX 2100 for its modern architecture and professional feature set. Users with a laptop or embedded system that already contains an M380 can rely on its superior OpenCL performance and memory capacity.
FAQ
Q: Which GPU wins in the Geekbench OpenCL benchmark?
A: The AMD Radeon R7 M380 wins with a score of 9313, beating the AMD Radeon Pro WX 2100’s 8536 by 8.3%.
Q: Does the AMD Radeon Pro WX 2100 support FP16 compute?
A: Yes, the WX 2100 delivers 1,248.3 GFLOPS of FP16 performance at a 1:1 ratio with its FP32 output. The R7 M380 has no FP16 capability listed.
Q: What is the memory capacity difference between the two cards?
A: The R7 M380 has 4 GB of DDR3 on a 128-bit bus, while the WX 2100 has 2 GB of GDDR5 on a 64-bit bus. The WX 2100 has higher bandwidth at 48.00 GB/s versus 32.00 GB/s.
Q: Which GPU has better API support?
A: The WX 2100 supports DirectX 12 (12_0) and Vulkan 1.3, while the R7 M380 supports DirectX 12 (11_1) and Vulkan 1.2.170. Both offer OpenGL 4.6.
Q: How do the two cards compare in pixel fill rate?
A: The WX 2100 has a pixel rate of 19.50 GPixel/s, which is 33% higher than the R7 M380’s 14.64 GPixel/s.
Q: What is the transistor density difference?
A: The WX 2100’s Lexa chip has 21.4 million transistors per square millimeter on a 14 nm process, while the M380’s Tropo chip has 12.2 million per square millimeter on a 28 nm process.