AMD Radeon PRO W7900D vs NVIDIA PG506-232 Comparison
AMD Radeon PRO W7900D
PG506-232
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO W7900D vs NVIDIA PG506-232
NVIDIA PG506-232 and AMD Radeon PRO W7900D are both professional workstation/server GPUs that occupy the 99th percentile of all GPUs in the database. The NVIDIA PG506-232 is an Ampere-generation server part built on the GA100 chip, while the AMD Radeon PRO W7900D is a RDNA 3.0 workstation card based on the Navi 31 die. Both cards deliver elite-level compute performance, but the benchmark data shows a narrow margin between them, with the NVIDIA card holding a slight edge in the single available OpenCL test.
Head-to-Head Benchmarks
The only direct benchmark comparison available is Geekbench OpenCL. In this test, the NVIDIA PG506-232 scores 225,124, while the AMD Radeon PRO W7900D scores 219,827. This gives NVIDIA a 2.4% advantage over AMD. While 2.4% is a modest margin, it is importantly the NVIDIA card achieves this with significantly different hardware characteristics, which we will examine in subsequent sections. The data shows that the PG506-232’s lead is consistent when compared to other rivals; it sits 8.7% ahead of the NVIDIA A100 PCIe 80 GB and 14.9% ahead of the NVIDIA RTX 6000D. The AMD card, by contrast, is 6.1% ahead of the A100 and 12.2% ahead of the RTX 6000D, but it trails the PG506-232 by that same 2.4% margin. Furthermore, the AMD card is 13.1% ahead of the NVIDIA Tesla V100S PCIe 32 GB, a rival that does not appear in the PG506-232’s nearest rivals list.
The delta percentages tell a clear story: both cards are closely matched, but the PG506-232 wins the only head-to-head test. The NVIDIA L20, another rival in the PG506-232’s list, scores 251,147, which is 10.4% higher than the PG506-232 and 12.5% higher than the AMD card. This places both cards in the upper echelon of professional GPUs, but neither is the absolute fastest in their respective peer groups. The data indicates that the PG506-232 has a slight but measurable performance advantage over the W7900D in OpenCL compute workloads.
Where Each One Wins
Based strictly on the benchmark results, the NVIDIA PG506-232 wins the single available test (Geekbench OpenCL) with a 2.4% higher score. This means that in raw OpenCL compute performance, the NVIDIA card is the winner. However, the AMD Radeon PRO W7900D does not win any benchmark tests in the dataset; it has zero wins. This is not to say the AMD card is uncompetitive — its score of 219,827 places it in the 99th percentile of all GPUs — but the data simply shows NVIDIA ahead in the one measurable dimension.
For use-case analysis, we must look at the specification differences to infer where each card might excel beyond the single benchmark. The AMD card has a much higher FP32 throughput (52.99 TFLOPS) compared to the NVIDIA card (10.32 TFLOPS), which suggests that in pure single-precision floating-point workloads, the AMD card could be significantly faster. However, the benchmark does not reflect this, possibly due to driver optimization or workload characteristics. Conversely, the NVIDIA card has a higher memory bandwidth (933.1 GB/s vs 864.0 GB/s) and a larger memory bus width (3072 bit vs 384 bit), which could favor memory-bandwidth-bound tasks. The AMD card counters with double the memory capacity (48 GB vs 24 GB), which is critical for large datasets that exceed 24 GB.
Architecture Differences
The architectural divide between these two cards is substantial. The NVIDIA PG506-232 is built on the Ampere architecture using the GA100 chip, fabricated on a 7 nm process at TSMC. It contains 54,200 million transistors on a die size of 826 mm², resulting in a transistor density of 65.6 million per mm². The AMD Radeon PRO W7900D uses the RDNA 3.0 architecture with the Navi 31 chip (codenamed Plum Bonito), fabricated on a 5 nm process, also at TSMC. It packs 57,700 million transistors onto a smaller 529 mm² die, achieving a much higher transistor density of 109.1 million per mm².
The NVIDIA card features 3584 shading units, 224 texture mapping units (TMUs), and 96 render output units (ROPs). It also includes 224 tensor cores but has no dedicated ray tracing cores. In contrast, the AMD card has 6144 shading units, 384 TMUs, and 192 ROPs, along with 96 ray tracing cores and no tensor cores. The AMD card’s shading unit count is nearly double that of the NVIDIA card, which partially explains its higher theoretical FP32 throughput. The NVIDIA card’s tensor cores are a key differentiator, as they enable accelerated AI and deep learning workloads that the AMD card cannot match with dedicated hardware. The AMD card does support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the NVIDIA card has no listed API support in the data, suggesting it is not intended for graphics workloads.
Specification Differences
The most striking difference is memory capacity: the AMD card offers 48 GB of GDDR6 memory, while the NVIDIA card has 24 GB of HBM2. This is a 2x difference in capacity. However, the NVIDIA card has a wider memory bus (3072 bit vs 384 bit) and higher bandwidth (933.1 GB/s vs 864.0 GB/s). The memory type also differs significantly — HBM2 versus GDDR6 — which affects latency and power characteristics.
Clock speeds are another major divergence. The AMD card has a base clock of 1327 MHz and a boost clock of 2156 MHz, while the NVIDIA card runs at 930 MHz base and 1440 MHz boost. The AMD card’s clocks are substantially higher, contributing to its 52.99 TFLOPS FP32 performance versus the NVIDIA card’s 10.32 TFLOPS. Both cards achieve a 1:1 FP16 to FP32 ratio, with the AMD card delivering 52.99 TFLOPS FP16 and the NVIDIA card delivering 10.32 TFLOPS FP16.
Power and physical specs also differ. The NVIDIA card has a TDP of 165 W and uses a single 8-pin EPS power connector, with a suggested PSU of 450 W. It is a dual-slot card measuring 267 mm in length and 112 mm in height. The AMD card is more power-hungry at 295 W TDP, requires two 8-pin connectors, and suggests a 600 W PSU. It is a triple-slot card, measuring 280 mm in length, 110 mm in height, and 51 mm in width. The NVIDIA card has no display outputs, while the AMD card offers 3x DisplayPort 2.1 and 1x mini-DisplayPort 2.1. The NVIDIA card is end-of-life, released in April 2021, while the AMD card is active, released in September 2025.
FAQ
Q: Which GPU is faster in the Geekbench OpenCL benchmark?
A: The NVIDIA PG506-232 scores 225,124, which is 2.4% higher than the AMD Radeon PRO W7900D’s score of 219,827.
Q: How much memory does each card have?
A: The AMD Radeon PRO W7900D has 48 GB of GDDR6 memory, while the NVIDIA PG506-232 has 24 GB of HBM2 memory.
Q: What is the FP32 performance difference?
A: The AMD card delivers 52.99 TFLOPS FP32, while the NVIDIA card delivers 10.32 TFLOPS FP32. The AMD card is substantially higher in theoretical single-precision throughput.
Q: Does either card have dedicated ray tracing hardware?
A: The AMD Radeon PRO W7900D has 96 ray tracing cores. The NVIDIA PG506-232 has no ray tracing cores listed, but it does have 224 tensor cores.
Q: What are the power requirements?
A: The NVIDIA PG506-232 has a TDP of 165 W and suggests a 450 W PSU. The AMD Radeon PRO W7900D has a TDP of 295 W and suggests a 600 W PSU.
Q: Which card supports display outputs?
A: The AMD Radeon PRO W7900D has 3x DisplayPort 2.1 and 1x mini-DisplayPort 2.1. The NVIDIA PG506-232 has no display outputs.
The Verdict
The data presents a clear picture for compute performance: the NVIDIA PG506-232 wins the only available benchmark, Geekbench OpenCL, with a 2.4% margin over the AMD Radeon PRO W7900D. Both cards sit in the 99th percentile of all GPUs, so this is a contest between top-tier hardware. If raw OpenCL compute is the priority, the NVIDIA card is the safer choice based on the measured score.
However, the specification data tells a different story for other potential use cases. The AMD card offers double the memory capacity (48 GB vs 24 GB), which is essential for workloads that require loading large models or datasets that exceed the NVIDIA card’s memory limit. The AMD card also has significantly higher FP32 throughput (52.99 TFLOPS vs 10.32 TFLOPS) and higher clock speeds (2156 MHz boost vs 1440 MHz boost), which could translate to faster performance in single-precision compute tasks that are not captured by the OpenCL benchmark. Additionally, the AMD card includes display outputs and API support (DirectX 12 Ultimate, OpenGL 4.6, Vulkan 1.4), making it a more versatile card for graphics or hybrid workloads.
The NVIDIA card, on the other hand, has higher memory bandwidth (933.1 GB/s vs 864.0 GB/s) and a wider memory bus (3072 bit vs 384 bit), which could benefit memory-bandwidth-sensitive applications. It also has tensor cores, which are absent from the AMD card, making it the better choice for AI and deep learning inference where tensor core acceleration is advantageous. The NVIDIA card is also more power-efficient, with a 165 W TDP versus the AMD’s 295 W, and it is physically smaller (dual-slot vs triple-slot), which may matter in dense server configurations. However, the NVIDIA card is end-of-life, while the AMD card is active, which could affect long-term availability and driver support. Ultimately, the NVIDIA PG506-232 wins the benchmark, but the AMD Radeon PRO W7900D offers compelling advantages in memory capacity, FP32 throughput, and feature set that make it a strong contender for specific workloads.