AMD Radeon PRO W7900D vs NVIDIA L20 Comparison

AMD
RADEON

AMD Radeon PRO W7900D

CORE STATE Navi 31
VRAM 48 GB
CLOCK SPEED 2156 MHz
TDP 295 W
BUS WIDTH 384 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

L20

CORE STATE AD102
VRAM 48 GB
CLOCK SPEED 2520 MHz
TDP 275 W
BUS WIDTH 384 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2023

PERFORMANCE BENCHMARKS

geekbench_opencl
219,827
274,276
geekbench_vulkan
N/A
228,018

Analysis: AMD Radeon PRO W7900D vs NVIDIA L20

The NVIDIA L20 and AMD Radeon PRO W7900D are both high-end workstation accelerators with 48 GB of GDDR6 memory, yet they target different workloads. The benchmark data shows a single head-to-head result in Geekbench OpenCL, where the L20 delivers a 24.8% higher score. However, the two cards diverge significantly in architecture, feature set, and physical design, making each a distinct tool for specific professional tasks.

Where Each One Wins

Based on the available benchmark results, the NVIDIA L20 is the clear winner in raw compute performance. In the Geekbench OpenCL test, the L20 scores 274,276 points against the W7900D’s 219,827, a decisive 24.8% advantage. This suggests the L20 is better suited for general-purpose compute workloads that rely heavily on OpenCL, such as scientific simulation, data processing, and rendering tasks that are not vendor-specific.

The AMD Radeon PRO W7900D, while scoring lower in this single test, has no benchmark wins in the provided data. Its strengths lie elsewhere, particularly in its display output capabilities. The W7900D offers three DisplayPort 2.1 outputs and one mini-DisplayPort 2.1, while the L20 provides four DisplayPort 1.4a outputs. The newer DisplayPort 2.1 standard supports higher resolutions and refresh rates, making the W7900D a better choice for high-end visualization, multi-monitor setups, or driving large displays with extreme bandwidth requirements.

In terms of pixel throughput, the W7900D leads with a pixel rate of 414.0 GPixel/s versus the L20’s 322.6 GPixel/s, a 28.3% advantage. This suggests the AMD card excels in rasterization-heavy tasks such as traditional 3D rendering, viewport performance, or any workload that stresses fill rate. Conversely, the L20’s texture rate of 927.4 GTexel/s exceeds the W7900D’s 827.9 GTexel/s, giving NVIDIA an edge in texture-bound operations.

Architecture Differences

The architectural divide is stark. The NVIDIA L20 is built on the Ada Lovelace architecture using the AD102 chip, fabricated on a 5 nm process at TSMC. It packs 76,300 million transistors into a 609 mm² die, achieving a transistor density of 125.3 million per mm². The W7900D uses AMD’s RDNA 3.0 architecture with the Navi 31 chip, codenamed Plum Bonito. It also uses a 5 nm TSMC process but contains 57,700 million transistors on a smaller 529 mm² die, with a lower density of 109.1 million per mm².

The compute unit configurations diverge dramatically. The L20 features 11,776 shading units, 368 texture mapping units, and 128 ROPs, along with 92 RT cores and 368 tensor cores. The W7900D has 6,144 shading units, 384 TMUs, and 192 ROPs, with 96 RT cores and no tensor cores. This means the L20 has nearly double the shader count, while the W7900D has more ROPs and slightly more RT cores. The absence of tensor cores on the AMD side is critical for AI and deep learning inference, as those workloads rely heavily on tensor operations.

Clock speeds also favor NVIDIA. The L20 runs at a base clock of 1440 MHz and boosts to 2520 MHz, while the W7900D operates at 1327 MHz base and 2156 MHz boost. Both cards use 2250 MHz memory with 18 Gbps effective speed, delivering identical 864.0 GB/s bandwidth over a 384-bit bus.

FAQ

Q: Which card has higher raw FP32 compute performance?

A: The NVIDIA L20 achieves 59.35 TFLOPS of FP32 performance, which is 12% higher than the AMD W7900D’s 52.99 TFLOPS. Both cards offer FP16 at a 1:1 ratio with the same respective TFLOPS figures.

Q: Do both cards support the same graphics APIs?

A: Yes, both cards support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. There is no difference in API support between the two.

Q: What is the memory capacity and type for each card?

A: Both the NVIDIA L20 and AMD W7900D have 48 GB of GDDR6 memory on a 384-bit bus, with identical 864.0 GB/s bandwidth. Memory specifications are exactly the same.

Q: How do the cards compare in terms of physical size?

A: The L20 is a dual-slot card measuring 267 mm in length and 111 mm in height. The W7900D is a triple-slot card, 280 mm long, 110 mm high, and 51 mm wide. The AMD card is longer and significantly thicker.

Q: Which card is better for AI workloads?

A: The NVIDIA L20 is better suited for AI due to its 368 tensor cores, which the AMD W7900D lacks entirely. This gives NVIDIA a structural advantage in tensor-based computations.

Q: What are the power connector requirements?

A: The L20 uses a single 16-pin connector with a 275 W TDP. The W7900D uses two 8-pin connectors with a 295 W TDP. Both recommend a 600 W power supply.

Specification Differences

The two cards differ in nearly every compute-related specification. The L20 has 11,776 shading units versus 6,144 on the W7900D, a difference of 91.7% more shaders. Texture mapping units favor AMD slightly at 384 versus 368, but ROPs are substantially higher on AMD at 192 versus 128. Ray tracing cores are close, with AMD having 96 and NVIDIA 92, but tensor cores exist only on the L20 with 368.

Clock speeds differ by 113 MHz at base and 364 MHz at boost, favoring NVIDIA. The L20’s FP32 throughput of 59.35 TFLOPS is 12% higher than the W7900D’s 52.99 TFLOPS. Pixel rate favors AMD at 414.0 GPixel/s versus 322.6 GPixel/s, while texture rate favors NVIDIA at 927.4 GTexel/s versus 827.9 GTexel/s.

Power and physical design diverge as well. The L20 draws 275 W and is dual-slot with a single 16-pin connector. The W7900D draws 295 W, is triple-slot, and uses two 8-pin connectors. The L20 is shorter at 267 mm versus 280 mm, and slightly taller at 111 mm versus 110 mm. The W7900D has a defined width of 51 mm, while the L20’s width is not specified.

Display outputs differ: the L20 has four DisplayPort 1.4a ports, while the W7900D has three DisplayPort 2.1 and one mini-DisplayPort 2.1. The L20 was released on 2023-11-15, while the W7900D came later on 2025-09-24. Both cards are currently active in production.

Head-to-Head Benchmarks

The only direct benchmark comparison available is Geekbench OpenCL, where the NVIDIA L20 scores 274,276 and the AMD W7900D scores 219,827. This gives the L20 a 24.8% advantage, which is the largest single delta between the two cards. This result aligns with the L20’s higher FP32 throughput and greater shader count, indicating that in OpenCL compute tasks, NVIDIA holds a clear lead.

Looking at the nearest rival data, the L20’s average benchmark score is 251,147, which is 14.2% above the W7900D’s 219,827. The L20 also outperforms the NVIDIA PG506-232 by 11.6%, while the W7900D trails that same rival by 2.4%. The W7900D does beat the NVIDIA A100 PCIe 80 GB by 6.1%, the RTX 6000D by 12.2%, and the Tesla V100S by 13.1%. The L20, in contrast, sits below the NVIDIA L40 by 11.6% and the RTX 6000 Ada Generation by 12.6%.

The pixel rate difference is notable: the W7900D’s 414.0 GPixel/s is 28.3% higher than the L20’s 322.6 GPixel/s, indicating AMD’s advantage in fill-rate-limited scenarios. Conversely, the L20’s texture rate of 927.4 GTexel/s is 12% higher than the W7900D’s 827.9 GTexel/s. These complementary strengths suggest that the L20 is optimized for compute and texture-heavy workloads, while the W7900D is built for pixel-pushing tasks.

The L20’s 59.35 TFLOPS FP32 performance is 12% above the W7900D’s 52.99 TFLOPS, reinforcing its compute lead. However, the W7900D’s higher ROP count (192 vs 128) and pixel rate are direct indicators of its strength in traditional graphics rendering. The L20’s 368 tensor cores provide a feature that the W7900D cannot match, making the NVIDIA card the only choice for AI inference or training within this comparison.

DETAILED SPECIFICATIONS

SPECIFICATION
PRO W7900D
L20
Core Specs
Shading Units
6,144
11,776 +91.7%
Shaders
6,144
11,776 +91.7%
TMUs
384
368 -4.2%
ROPs
192
128 -33.3%
Compute Units
96
—
SM Count
—
92
Clocks
Base Clock
1327 MHz
1440 MHz
Boost Clock
2156 MHz
2520 MHz
Memory Clock
2250 MHz 18 Gbps effective
2250 MHz 18 Gbps effective
Memory
Memory Size
48 GB
48 GB
VRAM (MB)
49,152
49,152 0.0%
Memory Type
GDDR6
GDDR6
Memory Bus
384 bit
384 bit
Bandwidth
864.0 GB/s
864.0 GB/s
Cache
L1 Cache
256 KB per Array
128 KB (per SM)
L2 Cache
6 MB
96 MB
L3 Cache
96 MB
—
L0 Cache
64 KB per WGP
—
Performance
Pixel Rate
414.0 GPixel/s
322.6 GPixel/s
Texture Rate
827.9 GTexel/s
927.4 GTexel/s
FP32 (TFLOPS)
52.99 TFLOPS
59.35 TFLOPS
FP64 (TFLOPS)
1.656 TFLOPS (1:32)
927.4 GFLOPS (1:64)
FP16 (TFLOPS)
52.99 TFLOPS (1:1)
59.35 TFLOPS (1:1)
AI/RT
RT Cores
96
92 -4.2%
Tensor Cores
—
368
Matrix Cores
192
—
Power
TDP
295 W
275 W
TDP (W)
295
275 -6.8%
Suggested PSU
600 W
600 W
Power Connectors
2x 8-pin
1x 16-pin
Architecture
Architecture
RDNA 3.0
Ada Lovelace
GPU Name
Navi 31
AD102
Codename
Plum Bonito
—
Generation
Radeon Pro Navi (Navi III Series)
Server Ada (Lxx)
Process Size
5 nm
5 nm
Transistors
57,700 million
76,300 million
Die Size
529 mm²
609 mm²
Foundry
TSMC
TSMC
Density
109.1M / mm²
125.3M / mm²
AMD MCM
GCD Transistors
45,400 million
—
GCD Die Size
304.35 mm²
—
MCD Transistors
2,050 million x6
—
API Support
DirectX
12 Ultimate (12_2)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
2.2
3.0
CUDA
—
8.9
Shader Model
6.9
6.8
Physical
Slot Width
Triple-slot
Dual-slot
Length
280 mm 11 inches
267 mm 10.5 inches
Height
110 mm 4.3 inches
111 mm 4.4 inches
Outputs
3x DisplayPort 2.11x mini-DisplayPort 2.1
4x DisplayPort 1.4a
Bus Interface
PCIe 4.0 x16
PCIe 4.0 x16
Other
Production
Active
Active
Predecessor
Radeon Pro Vega
Server Ampere
Successor
—
Server Hopper
View Radeon PRO W7900D Details View L20 Details