AMD Radeon PRO W7800 vs NVIDIA A100 SXM4 80 GB Comparison
AMD Radeon PRO W7800
A100 SXM4 80 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO W7800 vs NVIDIA A100 SXM4 80 GB
NVIDIA A100 SXM4 80 GB and AMD Radeon PRO W7800 represent two fundamentally different approaches to professional computing. The A100 is a data-center accelerator built for compute density, while the W7800 is a workstation card aimed at real-time graphics and interactive workloads. The benchmark data shows the A100 holding a lead in the one shared test, but the W7800 counters with a much higher FP32 throughput and a modern display engine, making the choice heavily dependent on whether the workload is compute-bound or graphics-bound.
Where Each One Wins
The NVIDIA A100 SXM4 80 GB wins the only direct head-to-head benchmark available in the data: the Geekbench Vulkan test. In that test, the A100 scores 183,725 against the W7800's 175,422, a 4.7% margin for NVIDIA. This is a meaningful difference, placing the A100 at the 98th percentile of all GPUs, while the W7800 sits at the 97th percentile. In terms of raw benchmark average, the A100 also leads, with an average score of 183,725 compared to the W7800's 164,894, a difference of roughly 11%. However, the W7800 is not without its own strengths. Its FP32 compute is listed at 45.25 TFLOPS, more than double the A100's 19.49 TFLOPS, which suggests a clear advantage in single-precision compute tasks like simulation, scientific visualization, and certain rendering workloads.
The A100's victory in Vulkan is notable because Vulkan is a graphics API, not a pure compute test. This suggests the A100's architecture, despite being designed for AI and HPC, handles graphics workloads efficiently enough to outperform a dedicated workstation card from AMD. Yet, the W7800's advantage in FP32 throughput indicates it will win in scenarios that stress raw shader compute, such as real-time ray tracing, rasterization, and OpenCL-based rendering. The data shows a split: the A100 leads in the available cross-API benchmark, while the W7800's architectural specs point to superiority in traditional GPU compute and graphics pipelines. For a user evaluating these cards, the A100 is the safer bet for mixed compute and graphics, but the W7800 is likely the stronger choice for pure single-precision workloads.
Architecture Differences
The architectural divide between these two GPUs is stark. The A100 is built on NVIDIA's Ampere architecture, using the GA100 chip, fabricated on a 7 nm process at TSMC. It packs 54,200 million transistors onto a massive 826 mm² die, yielding a transistor density of 65.6 million per mm². The W7800, in contrast, uses AMD's RDNA 3.0 architecture with the Navi 31 chip, codenamed Plum Bonito. It's built on a more advanced 5 nm process, also at TSMC, with 57,700 million transistors on a smaller 529 mm² die, achieving a higher density of 109.1 million per mm². This means the W7800 gets more transistors into a smaller space, which is a key reason it can clock much higher.
Clock speeds differ dramatically. The A100 has a base clock of 1275 MHz and a boost of 1410 MHz, while the W7800 starts at 1895 MHz and boosts to 2525 MHz. That's a 1,115 MHz difference at boost, which explains the W7800's huge FP32 output despite having fewer shading units (4,480 vs. 6,912). The A100 compensates with more TMUs (432 vs. 280) and ROPs (160 vs. 128), but it also relies on dedicated tensor cores — 432 of them — which the W7800 lacks entirely. Conversely, the W7800 has 70 ray accelerators (RT cores), while the A100 has none listed. This is a clear sign that the W7800 is designed for real-time ray tracing, whereas the A100 is built for matrix math and AI inference.
Memory architecture is also divergent. The A100 uses 80 GB of HBM2e on a 5120-bit bus, delivering 2.04 TB/s of bandwidth. The W7800 uses 32 GB of GDDR6 on a 256-bit bus, providing 576.0 GB/s. The A100's bandwidth is 3.5 times higher, which is critical for large datasets and HPC workloads. However, the W7800's memory is faster per-pin (18 Gbps effective vs. 3.2 Gbps), just on a narrower bus. The A100 has no display outputs, while the W7800 offers 3x DisplayPort 2.1 and 1x mini-DisplayPort 2.1. The A100 is an OAM module with no power connectors, requiring an 800 W PSU suggestion, while the W7800 is a dual-slot card with 2x 8-pin connectors and a 600 W PSU suggestion. The W7800 also supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the A100 lists no API support, reinforcing its role as a compute-only device.
Head-to-Head Benchmarks
The single head-to-head benchmark available is Geekbench Vulkan. The A100 scores 183,725, and the W7800 scores 175,422. The A100 wins by 4.7%. To put this in context, the A100's nearest rival, the NVIDIA RTX 5000 Ada Generation, scores 184,664, just 0.5% ahead of the A100. The W7800's closest competitor, the NVIDIA RTX A5500, scores 165,217, which is 0.2% below the W7800. So, in the Vulkan test, the A100 sits right at the top of its peer group, while the W7800 is slightly above the RTX A5500 but below the RTX 4500 Ada Generation (166,094, 0.7% ahead of the W7800).
The 4.7% delta between the two cards is significant but not overwhelming. It suggests that in Vulkan-based workloads, the A100 has a real edge, but the W7800 is not far behind. However, the A100's average benchmark score of 183,725 is based on a single test, while the W7800 has two benchmarks: Geekbench Vulkan (175,422) and Geekbench OpenCL (154,366). The OpenCL score is notably lower than the Vulkan score, which indicates the W7800's performance varies by API. In OpenCL, the W7800 would be closer to the NVIDIA RTX A5500 (165,217) but still behind it. The A100's Vulkan score is its only data point, so its average is inflated by the absence of a lower OpenCL result. This is a caveat when comparing averages: the A100's 183,725 average reflects a single strong result, while the W7800's 164,894 average is dragged down by its weaker OpenCL showing. If the A100 were tested in OpenCL, it might not maintain the same lead.
Specification Differences
The two cards differ on nearly every major specification. The A100 uses 7 nm technology, while the W7800 uses 5 nm. The A100 has a die size of 826 mm², versus 529 mm² for the W7800. Transistor counts are close — 54,200 million for NVIDIA, 57,700 million for AMD — but density favors the W7800 at 109.1M per mm² vs. 65.6M per mm². Clock speeds are dramatically different: the A100 boosts to 1410 MHz, while the W7800 boosts to 2525 MHz. Memory is HBM2e for the A100 (80 GB, 5120-bit, 2.04 TB/s) versus GDDR6 for the W7800 (32 GB, 256-bit, 576.0 GB/s). The A100 has more shading units (6,912 vs. 4,480), more TMUs (432 vs. 280), and more ROPs (160 vs. 128), but the W7800 has higher pixel rate (323.2 GPixel/s vs. 225.6) and texture rate (707.0 GTexel/s vs. 609.1). FP32 compute is 45.25 TFLOPS for the W7800 versus 19.49 TFLOPS for the A100. FP16 is 90.50 TFLOPS for the W7800 versus 77.97 TFLOPS for the A100. The A100 has tensor cores (432) and no RT cores; the W7800 has RT cores (70) and no tensor cores. TDP is 400 W for the A100 versus 260 W for the W7800. The A100 is an OAM module with no display outputs; the W7800 is a dual-slot card with DisplayPort 2.1 outputs and dimensions of 280 mm x 110 mm x 40 mm. The A100 is end-of-life, released in November 2020, while the W7800 is active, released in April 2023. The W7800 has a launch MSRP of 2,499 USD.
FAQ
Q: Which card is faster in the Geekbench Vulkan test?
A: The NVIDIA A100 SXM4 80 GB scores 183,725, which is 4.7% higher than the AMD Radeon PRO W7800's 175,422.
Q: Does the W7800 have any compute advantage over the A100?
A: Yes, the W7800's FP32 throughput is 45.25 TFLOPS, more than double the A100's 19.49 TFLOPS, indicating a strong lead in single-precision tasks.
Q: Why does the A100 have a higher average benchmark score?
A: The A100's average of 183,725 comes from a single Vulkan test, while the W7800's average of 164,894 includes a lower OpenCL score of 154,366, which pulls its average down.
Q: Can either card output to a display?
A: Only the W7800 has display outputs, offering 3x DisplayPort 2.1 and 1x mini-DisplayPort 2.1. The A100 has no display outputs, making it unsuitable for direct monitor connection.
Q: Which card has more memory bandwidth?
A: The A100 has 2.04 TB/s of bandwidth from its HBM2e memory, which is 3.5 times the W7800's 576.0 GB/s from GDDR6.
Q: What is the difference in ray tracing support?
A: The W7800 has 70 RT cores, while the A100 lists no RT cores, meaning ray tracing is only supported on the AMD card.
The Verdict
The data points to a clear division of labor. If the workload is Vulkan-based graphics or mixed compute, the A100 SXM4 80 GB wins by 4.7% in the direct comparison, and its 98th percentile ranking supports its strength. Its massive 80 GB HBM2e pool with 2.04 TB/s bandwidth is unmatched for large datasets, and the 432 tensor cores make it the obvious choice for AI and deep learning inference. The A100 is a compute monster, but it's also an OAM module with no display outputs, end-of-life status, and a 400 W TDP, meaning it requires a server chassis and significant power infrastructure.
The W7800, on the other hand, is a self-contained workstation card. It has display outputs, a dual-slot form factor, and a lower 260 W TDP with 2x 8-pin connectors. Its FP32 performance of 45.25 TFLOPS is more than double the A100's, making it the superior choice for single-precision simulation, CAD, and real-time rendering. The 70 RT cores enable hardware ray tracing, which the A100 cannot do. Its 32 GB GDDR6 is ample for most workstation tasks, though not in the same league as the A100's capacity. The W7800 is also active and newer, with a launch MSRP of 2,499 USD. The verdict is straightforward: pick the A100 for compute density, AI, and massive memory bandwidth, and pick the W7800 for interactive graphics, ray tracing, and single-precision compute in a workstation environment. The A100 is the better score in the one test we have, but the W7800's architectural features argue for it in a different class of work.