AMD Radeon PRO W7700 vs NVIDIA A100 PCIe 80 GB Comparison

AMD
RADEON

AMD Radeon PRO W7700

CORE STATE Navi 32
VRAM 16 GB
CLOCK SPEED 2600 MHz
TDP 190 W
BUS WIDTH 256 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 5 nm
LAUNCH DATE 2023
VS
NVIDIA
GEFORCE

A100 PCIe 80 GB

CORE STATE GA100
VRAM 80 GB
CLOCK SPEED 1410 MHz
TDP 300 W
BUS WIDTH 5120 bit
ARCHITECTURE Ampere
nm
PROCESS 7 nm
LAUNCH DATE 2021

PERFORMANCE BENCHMARKS

geekbench_opencl
108,245
207,124
geekbench_vulkan
129,706
N/A

Analysis: AMD Radeon PRO W7700 vs NVIDIA A100 PCIe 80 GB

The NVIDIA A100 PCIe 80 GB and AMD Radeon PRO W7700 serve fundamentally different purposes, and the benchmark data reflects that split clearly. The A100 is a server-grade compute accelerator with a 99th percentile ranking among all GPUs, while the W7700 is a workstation card sitting at the 95th percentile. In the single available head-to-head OpenCL test, the A100 dominates with a score of 207,124 against the W7700’s 108,245—a 91.3% advantage. However, the W7700 brings modern display outputs, a much lower power draw, and a newer architecture to the table. The choice between them depends entirely on whether you need raw compute throughput or a practical, interactive workstation tool.

Where Each One Wins

The NVIDIA A100 PCIe 80 GB wins decisively in raw compute performance. Its Geekbench OpenCL score of 207,124 places it 91.3% ahead of the Radeon PRO W7700 in the only benchmark where both were tested. This is a compute-first card with no display outputs, designed for server racks and headless acceleration tasks. The data shows it outperforms the NVIDIA RTX 6000D by 5.7% and the Tesla V100S PCIe 32 GB by 6.5% in average benchmark scores, confirming its position at the top of the compute hierarchy. Its 99th percentile ranking across all GPUs underscores that this is a specialist tool for workloads that demand maximum floating-point throughput.

The AMD Radeon PRO W7700 wins in practicality and efficiency. It draws 190 W versus the A100’s 300 W, and it requires only a 450 W suggested PSU compared to 700 W for the A100. The W7700 also offers 4x DisplayPort 2.1 outputs, meaning it can drive modern monitors directly, while the A100 has no display outputs at all. In the Vulkan benchmark, the W7700 scores 129,706, which is higher than its OpenCL result of 108,245—indicating strong graphics API performance that the A100 cannot match since it has no Vulkan benchmark listed. The W7700’s average benchmark score of 118,976 puts it 1.3% ahead of the NVIDIA GB10 and 1.6% ahead of the RTX 4000 SFF Ada Generation, showing it is competitive within its own workstation class.

Architecture Differences

The architectural gap between these two GPUs is generational. The A100 uses the GA100 chip on NVIDIA’s Ampere architecture, built on TSMC’s 7 nm process. It packs 54,200 million transistors across an 826 mm² die, yielding a transistor density of 65.6 million per square millimeter. This massive chip includes 6912 shading units, 432 texture mapping units, 160 ROPs, and 432 tensor cores—the latter being critical for AI and machine learning workloads. The A100’s memory subsystem is equally imposing: 80 GB of HBM2e on a 5120-bit bus, delivering 1.94 TB/s of bandwidth. It has a base clock of 1065 MHz and a boost clock of 1410 MHz.

The W7700 is built on AMD’s RDNA 3.0 architecture with the Navi 32 chip, fabricated on a newer 5 nm process at TSMC. It contains 28,100 million transistors on a 346 mm² die, achieving a higher transistor density of 81.2 million per square millimeter. The chip has 3072 shading units, 192 TMUs, 96 ROPs, and 48 ray tracing cores—but no tensor cores. Its memory is 16 GB of GDDR6 on a 256-bit bus, providing 576.0 GB/s of bandwidth. Clocks are significantly higher: 1900 MHz base and 2600 MHz boost. The W7700 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the A100 lists no API support in the data.

The transistor density difference is telling: the W7700’s 5 nm process allows 81.2M transistors per mm² versus 65.6M for the A100’s 7 nm node. However, the A100’s sheer die size—826 mm² versus 346 mm²—gives it nearly double the total transistors, which explains its compute advantage.

Head-to-Head Benchmarks

The only direct comparison available is the Geekbench OpenCL test, and it is not close. The NVIDIA A100 scores 207,124, while the AMD W7700 manages 108,245. That is a 91.3% delta in favor of the A100—nearly double the performance. This result aligns with the A100’s positioning: it has 6912 shading units versus 3072, more than twice the TMUs (432 vs 192), and 1.94 TB/s of memory bandwidth versus 576 GB/s. The A100’s FP32 throughput is 19.49 TFLOPS, which is lower than the W7700’s 31.95 TFLOPS, yet the A100 still wins the OpenCL test by a wide margin—suggesting that memory bandwidth and tensor core performance play a larger role in this benchmark than raw shader count.

The W7700 has its own wins in the data, though not in the head-to-head table. Its Vulkan score of 129,706 is 19.8% higher than its OpenCL score, showing strong graphics API performance. The A100 has no Vulkan benchmark recorded, so the W7700 is the only card here with verified modern graphics API capability. In terms of rasterization rates, the W7700 achieves 249.6 GPixel/s pixel fill rate, slightly ahead of the A100’s 225.6 GPixel/s. However, the A100 counters with a texture rate of 609.1 GTexel/s versus the W7700’s 499.2 GTexel/s. The A100 also leads in FP16 compute at 77.97 TFLOPS (4:1 ratio) versus the W7700’s 63.90 TFLOPS (2:1 ratio), despite the W7700 having a higher FP32 figure.

The Verdict

The data dictates a clear split. Choose the NVIDIA A100 PCIe 80 GB if your priority is maximum compute throughput in a server environment. Its 91.3% OpenCL lead over the W7700, combined with 80 GB of HBM2e memory and 432 tensor cores, makes it the obvious choice for large-scale AI, scientific simulation, and data center workloads. The 99th percentile ranking and its position 5.7% ahead of the RTX 6000D confirm it sits at the top of the compute stack. Be prepared for the 300 W power draw, the 700 W PSU requirement, and the complete lack of display outputs—this card lives in a rack, not on a desk.

Choose the AMD Radeon PRO W7700 if you need a workstation card that can actually drive monitors. Its 4x DisplayPort 2.1 outputs, 190 W power draw, and 450 W PSU requirement make it far easier to integrate into a standard workstation. The Vulkan score of 129,706 shows it handles graphics APIs well, and its 31.95 TFLOPS FP32 performance is actually higher than the A100’s 19.49 TFLOPS. The W7700 is 1.3% ahead of the NVIDIA GB10 in average benchmark scores, showing it competes well among modern workstation options. It is also end-of-life for the A100 (production status: End-of-life), while the W7700 has no such status listed—meaning the A100 is a legacy purchase.

FAQ

Q: Which GPU has higher raw compute performance in OpenCL?

A: The NVIDIA A100 PCIe 80 GB scores 207,124 in Geekbench OpenCL, which is 91.3% higher than the AMD Radeon PRO W7700’s 108,245.

Q: Can either card output video to displays?

A: No for the A100—it has no display outputs. Yes for the W7700, which offers 4x DisplayPort 2.1 connections.

Q: What is the memory capacity and type difference?

A: The A100 has 80 GB of HBM2e with 1.94 TB/s bandwidth on a 5120-bit bus. The W7700 has 16 GB of GDDR6 with 576.0 GB/s bandwidth on a 256-bit bus.

Q: How do their power requirements compare?

A: The A100 draws 300 W with a suggested 700 W PSU, while the W7700 draws 190 W with a suggested 450 W PSU.

Q: Which card has tensor cores?

A: The A100 has 432 tensor cores. The W7700 has none listed in the data.

Q: How does the W7700’s Vulkan performance compare to its OpenCL performance?

A: The W7700 scores 129,706 in Geekbench Vulkan, which is higher than its OpenCL score of 108,245—a 19.8% improvement in the Vulkan API.

Specification Differences

| Specification | NVIDIA A100 PCIe 80 GB | AMD Radeon PRO W7700 |

|---|---|---|

| Architecture | Ampere | RDNA 3.0 |

| Process Node | 7 nm | 5 nm |

| Transistors | 54,200 million | 28,100 million |

| Die Size | 826 mm² | 346 mm² |

| Transistor Density | 65.6M / mm² | 81.2M / mm² |

| Base Clock | 1065 MHz | 1900 MHz |

| Boost Clock | 1410 MHz | 2600 MHz |

| Memory Size | 80 GB | 16 GB |

| Memory Type | HBM2e | GDDR6 |

| Memory Bus Width | 5120 bit | 256 bit |

| Memory Bandwidth | 1.94 TB/s | 576.0 GB/s |

| Shading Units | 6912 | 3072 |

| TMUs | 432 | 192 |

| ROPs | 160 | 96 |

| Tensor Cores | 432 | None |

| RT Cores | None listed | 48 |

| FP32 Performance | 19.49 TFLOPS | 31.95 TFLOPS |

| FP16 Performance | 77.97 TFLOPS (4:1) | 63.90 TFLOPS (2:1) |

| Pixel Rate | 225.6 GPixel/s | 249.6 GPixel/s |

| Texture Rate | 609.1 GTexel/s | 499.2 GTexel/s |

| TDP | 300 W | 190 W |

| Power Connectors | 8-pin EPS | 1x 8-pin |

| Suggested PSU | 700 W | 450 W |

| Display Outputs | No outputs | 4x DisplayPort 2.1 |

| Length | 267 mm (10.5 inches) | 241 mm (9.5 inches) |

| Height | 111 mm (4.4 inches) | 111 mm (4.4 inches) |

| DirectX Support | None listed | 12 Ultimate (12_2) |

| OpenGL Support | None listed | 4.6 |

| Vulkan Support | None listed | 1.4 |

| Release Date | June 27, 2021 | November 12, 2023 |

| Production Status | End-of-life | Not listed |

| Launch MSRP | Not listed | 999 USD |

DETAILED SPECIFICATIONS

SPECIFICATION
PRO W7700
A100 PCIe 80 GB
Core Specs
Shading Units
3,072
6,912 +125.0%
Shaders
3,072
6,912 +125.0%
TMUs
192
432 +125.0%
ROPs
96
160 +66.7%
Compute Units
48
—
SM Count
—
108
Clocks
Base Clock
1900 MHz
1065 MHz
Boost Clock
2600 MHz
1410 MHz
Memory Clock
2250 MHz 18 Gbps effective
1512 MHz 3 Gbps effective
Memory
Memory Size
16 GB
80 GB
VRAM (MB)
16,384
81,920 +400.0%
Memory Type
GDDR6
HBM2e
Memory Bus
256 bit
5120 bit
Bandwidth
576.0 GB/s
1.94 TB/s
Cache
L1 Cache
128 KB per Array
192 KB (per SM)
L2 Cache
2 MB
80 MB
L3 Cache
64 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
249.6 GPixel/s
225.6 GPixel/s
Texture Rate
499.2 GTexel/s
609.1 GTexel/s
FP32 (TFLOPS)
31.95 TFLOPS
19.49 TFLOPS
FP64 (TFLOPS)
998.4 GFLOPS (1:32)
9.746 TFLOPS (1:2)
FP16 (TFLOPS)
63.90 TFLOPS (2:1)
77.97 TFLOPS (4:1)
AI/RT
RT Cores
48
—
Tensor Cores
—
432
Matrix Cores
96
—
BF16
—
311.84 TFLOPS (16:1)
TF32
—
155.92 TFLOPs (8:1)
Power
TDP
190 W
300 W
TDP (W)
190
300 +57.9%
Suggested PSU
450 W
700 W
Power Connectors
1x 8-pin
8-pin EPS
Architecture
Architecture
RDNA 3.0
Ampere
GPU Name
Navi 32
GA100
Codename
Wheat Nas
—
Generation
Radeon Pro Navi (Navi III Series)
Server Ampere (Axx)
Process Size
5 nm
7 nm
Transistors
28,100 million
54,200 million
Die Size
346 mm²
826 mm²
Foundry
TSMC
TSMC
Density
81.2M / mm²
65.6M / mm²
API Support
DirectX
12 Ultimate (12_2)
—
OpenGL
4.6
—
Vulkan
1.4
—
OpenCL
2.2
3.0
CUDA
—
8.0
Shader Model
6.8
—
Physical
Slot Width
Dual-slot
Dual-slot
Length
241 mm 9.5 inches
267 mm 10.5 inches
Height
111 mm 4.4 inches
111 mm 4.4 inches
Outputs
4x DisplayPort 2.1
No outputs
Bus Interface
PCIe 4.0 x16
PCIe 4.0 x16
Other
Launch Price
999 USD
—
Production
—
End-of-life
Predecessor
Radeon Pro Vega
Tesla Turing
Successor
—
Server Ada
View Radeon PRO W7700 Details View A100 PCIe 80 GB Details