AMD Radeon PRO W6400 vs NVIDIA GeForce GTX 1060 5 GB Comparison
AMD Radeon PRO W6400
GeForce GTX 1060 5 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon PRO W6400 vs NVIDIA GeForce GTX 1060 5 GB
The AMD Radeon PRO W6400 and NVIDIA GeForce GTX 1060 5 GB represent two distinct eras of GPU design, separated by five years of architectural evolution. The data shows the W6400, a modern RDNA 2.0 part built on a 6 nm process, decisively outperforms the older Pascal-based GTX 1060 in both recorded benchmarks, despite the latter having a wider memory bus and more shading units. The W6400’s average benchmark score of 37,157 places it in the 80th percentile of all GPUs, while the GTX 1060’s 33,694 average sits in the 78th percentile. These results reveal that architectural efficiency and clock speed can overcome raw hardware counts, making the W6400 the stronger performer in the tests available.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The AMD Radeon PRO W6400 achieves an average benchmark score of 37,157, which is 10.3% higher than the NVIDIA GeForce GTX 1060 5 GB’s average of 33,694. The W6400 also holds a higher percentile rank at 80 versus the GTX 1060’s 78.
Q: How does the W6400 perform in Vulkan compared to the GTX 1060?
A: The W6400 wins the Geekbench Vulkan test with a score of 39,286, beating the GTX 1060’s 33,991 by a significant 15.6% margin. This is the largest performance gap between the two cards in any recorded test.
Q: What are the memory specifications of each card?
A: The W6400 comes with 4 GB of GDDR6 memory on a 64-bit bus, providing 128.0 GB/s of bandwidth. The GTX 1060 offers 5 GB of GDDR5 memory on a 160-bit bus, yielding a higher 160.2 GB/s bandwidth.
Q: Which card has a higher transistor density?
A: The AMD Radeon PRO W6400 has a transistor density of 50.5 million transistors per mm², which is dramatically higher than the GTX 1060’s 22.0 million per mm². This is a result of the W6400’s smaller 6 nm process node.
Q: Is the GTX 1060 a dual-slot card?
A: Yes, the NVIDIA GeForce GTX 1060 5 GB is a dual-slot card and requires a 1x 6-pin power connector. In contrast, the AMD Radeon PRO W6400 is a single-slot card that requires no power connectors.
Q: What is the difference in FP16 performance?
A: The W6400 delivers 7.130 TFLOPS of FP16 performance at a 2:1 ratio, while the GTX 1060 only manages 68.36 GFLOPS at a 1:64 ratio. This represents a massive advantage for the W6400 in half-precision compute tasks.
The Verdict
Based strictly on benchmark data, the AMD Radeon PRO W6400 is the clear winner for compute workloads. It wins both head-to-head tests, with a 4.9% lead in OpenCL and a 15.6% lead in Vulkan. Its average benchmark score of 37,157 is superior to the GTX 1060’s 33,694, and it sits closer to more powerful rivals like the NVIDIA GeForce RTX 4070, which scores 37,648 (a mere 1.3% delta). The GTX 1060, in contrast, is closely matched with the AMD Radeon RX 480, which scores 33,997 (a 0.9% delta). For users prioritizing modern API performance and efficiency, the W6400 is the obvious choice.
The NVIDIA GeForce GTX 1060 5 GB still holds relevance for those who need more memory capacity (5 GB vs 4 GB) and higher memory bandwidth (160.2 GB/s vs 128.0 GB/s). Its wider 160-bit bus and higher texture rate of 136.7 GTexel/s versus the W6400’s 111.4 GTexel/s could benefit certain memory-heavy or texture-bound tasks. However, in raw compute scores, it lags behind. The GTX 1060’s nearest rival, the NVIDIA RTX A5000, scores 33,622, which is only 0.2% lower, indicating the GTX 1060 is at the lower end of its performance tier. The data suggests the GTX 1060 is best suited for legacy applications or scenarios where the larger frame buffer outweighs raw compute speed.
Head-to-Head Benchmarks
The AMD Radeon PRO W6400 demonstrates a clean sweep in the head-to-head benchmarks, winning both recorded tests. In the Geekbench OpenCL test, the W6400 scores 35,027 against the GTX 1060’s 33,397, a 4.9% advantage. While this is a modest lead, it is consistent with the W6400’s higher boost clock of 2321 MHz compared to the GTX 1060’s 1709 MHz. The W6400’s newer architecture allows it to extract more performance per clock, despite having only 768 shading units versus the GTX 1060’s 1,280.
The most striking difference appears in the Geekbench Vulkan test, where the W6400 scores 39,286, beating the GTX 1060’s 33,991 by a substantial 15.6%. This large delta highlights the W6400’s superior support for modern graphics APIs. The W6400 supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the GTX 1060 is limited to DirectX 12 (12_1). This generational gap in API support likely explains why the W6400 excels in Vulkan, a test that leverages low-level hardware access. The GTX 1060’s nearest rival in its own benchmark pool, the AMD Radeon RX 480, scores 33,997, which is only 0.9% higher, showing that the GTX 1060 is performance-pinned in this range.
Specification Differences
The two cards differ significantly in their core specifications. The AMD Radeon PRO W6400 is built on a 6 nm process with 5,400 million transistors on a 107 mm² die, resulting in a transistor density of 50.5M per mm². In contrast, the NVIDIA GeForce GTX 1060 5 GB uses a 16 nm process with 4,400 million transistors on a much larger 200 mm² die, giving it a density of just 22.0M per mm². The W6400’s clock speeds are substantially higher, with a base of 2039 MHz and boost of 2321 MHz, compared to the GTX 1060’s 1506 MHz base and 1709 MHz boost.
Memory configurations also diverge sharply. The W6400 has 4 GB of GDDR6 memory on a 64-bit bus, with a bandwidth of 128.0 GB/s and an effective memory speed of 16 Gbps. The GTX 1060 offers 5 GB of GDDR5 on a 160-bit bus, with a higher bandwidth of 160.2 GB/s but a slower effective speed of 8 Gbps. The GTX 1060 also has more shading units (1,280 vs 768), texture mapping units (80 vs 48), and raster output units (40 vs 32). Despite this, the W6400 achieves a higher pixel rate of 74.27 GPixel/s versus the GTX 1060’s 68.36 GPixel/s, while the GTX 1060 wins on texture rate at 136.7 GTexel/s versus 111.4 GTexel/s.
Power and physical specifications also differ. The W6400 has a TDP of just 50 W and is a single-slot card with no power connectors, requiring only a 250 W PSU. The GTX 1060 has a 120 W TDP, is a dual-slot card with a 1x 6-pin connector, and requires a 300 W PSU. The GTX 1060 is also longer at 250 mm (9.8 inches), while the W6400’s dimensions are not listed. The bus interface differs as well, with the W6400 using PCIe 4.0 x4 and the GTX 1060 using PCIe 3.0 x16.
Architecture Differences
The architectural divide between these GPUs is vast. The AMD Radeon PRO W6400 is based on RDNA 2.0 architecture, manufactured on a 6 nm process at TSMC. It features 12 ray tracing cores, a capability entirely absent from the GTX 1060. The W6400 supports DirectX 12 Ultimate (12_2), which includes features like hardware ray tracing and variable rate shading, while the GTX 1060 only supports DirectX 12 (12_1). Both cards support OpenGL 4.6 and Vulkan 1.4, but the W6400’s Vulkan implementation is clearly more efficient given its benchmark lead.
The GTX 1060 uses NVIDIA’s Pascal architecture, which lacks dedicated ray tracing or tensor cores. Its FP16 performance is severely limited at 68.36 GFLOPS (1:64 ratio), whereas the W6400 delivers 7.130 TFLOPS (2:1 ratio). The W6400’s FP32 performance is 3.565 TFLOPS, which is lower than the GTX 1060’s 4.375 TFLOPS, yet the W6400 still wins in benchmarks—proof of its architectural efficiency and higher clock speeds. The GTX 1060 is part of the GeForce 10-series, succeeding the GeForce 900 and preceding the GeForce 20, while the W6400 belongs to the Radeon Pro Navi (Navi II Series) generation, succeeding the Radeon Pro Vega. Both cards are end-of-life, but the W6400’s newer release date (January 2022 vs December 2017) and modern features make it the more future-proof option in compute scenarios.