AMD Radeon HD 8950M vs AMD Radeon RX 570X Comparison

AMD
RADEON

AMD Radeon HD 8950M

CORE STATE Saturn
VRAM 2 GB
CLOCK SPEED —
TDP 100 W
BUS WIDTH 128 bit
ARCHITECTURE GCN 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2013
VS
AMD
RADEON

Radeon RX 570X

CORE STATE Polaris 20
VRAM 8 GB
CLOCK SPEED 1244 MHz
TDP 150 W
BUS WIDTH 256 bit
ARCHITECTURE GCN 4.0
nm
PROCESS 14 nm
LAUNCH DATE 2018

PERFORMANCE BENCHMARKS

geekbench_opencl
13,772
38,939
geekbench_vulkan
12,979
N/A
passmark_g2d
N/A
750
passmark_g3d
N/A
1,923

Analysis: AMD Radeon HD 8950M vs AMD Radeon RX 570X

AMD Radeon RX 570X vs AMD Radeon HD 8950M

Head-to-Head Benchmarks

The benchmark data shows a decisive victory for the AMD Radeon RX 570X, with a single head-to-head comparison that demonstrates an overwhelming performance gap. In the Geekbench OpenCL test, the RX 570X scores 38,939 points against the HD 8950M's 13,772 points. This represents a 182.7% advantage for the RX 570X — nearly three times the compute throughput of the older mobile part. The delta is so large that it underscores not just generational improvement but a fundamental shift in GPU capability between the two products.

Looking at broader benchmark averages, the RX 570X maintains a slim but consistent lead. Its average benchmark score of 13,871 places it 495 points ahead of the HD 8950M's 13,376 average. While the head-to-head OpenCL result shows a massive 182.7% gap, the overall average scores suggest that in mixed workloads — including 2D and 3D tests — the RX 570X's advantage narrows to approximately 3.7%. This discrepancy indicates that the HD 8950M performs relatively better in certain non-compute tasks, though it never overtakes the RX 570X in any recorded benchmark.

The RX 570X also holds a slight edge in the percentile rankings. It sits at the 55th percentile among all GPUs, while the HD 8950M sits at the 54th percentile. This one-percentile difference reflects the narrow average-score margin, even as the compute-specific OpenCL result shows a far more dramatic separation.

Examining the rival landscapes further contextualizes these scores. The RX 570X's nearest rivals include the NVIDIA RTX A2000 Mobile with an average score of 13,821 (0.4% ahead of the RX 570X), the AMD Radeon 660M at 13,812 (0.4% ahead), the AMD Radeon RX 7900 XT at 13,745 (0.9% ahead), and the NVIDIA Tesla K10 at 14,029 (1.1% behind). The HD 8950M's nearest rivals are clustered tighter: the AMD Radeon RX 5500M at 13,356 (0.2% ahead), the AMD FirePro M6100 at 13,354 (0.2% ahead), the AMD Radeon Pro 555 at 13,407 (0.2% behind), and the AMD Radeon Pro 555X at 13,321 (0.4% ahead). This comparison shows that both GPUs occupy similar performance tiers in aggregate, but the RX 570X's compute advantage is far more pronounced than its average-score lead suggests.

The wins tally confirms the direction: the RX 570X secures 1 win in the head-to-head benchmarks, while the HD 8950M secures 0. There is no benchmark category where the HD 8950M outperforms the RX 570X. The Geekbench OpenCL result is the only directly comparable test, and it is a landslide.

The Verdict

The data points to a clear conclusion: the AMD Radeon RX 570X is the superior GPU in every measured category. The 182.7% lead in Geekbench OpenCL is not a marginal improvement — it is a generational leap that reflects the RX 570X's newer architecture, higher transistor count, and more robust memory subsystem. Anyone prioritizing compute performance should choose the RX 570X without hesitation.

The HD 8950M, however, retains a niche. Its average benchmark score of 13,376 is within 3.7% of the RX 570X's 13,871, meaning that in real-world mixed workloads, the two GPUs may feel closer than the OpenCL numbers suggest. The HD 8950M also draws 100 W versus the RX 570X's 150 W, making it a more power-efficient option for portable devices where thermal and battery constraints matter. Its MXM Module form factor also indicates it was designed for upgradeable laptop implementations, whereas the RX 570X is a dual-slot desktop card.

For users with an existing HD 8950M system, the upgrade path to an RX 570X would deliver a transformative compute performance increase, but the average-score difference suggests that general desktop and 2D tasks would see only modest gains. For users building a new system with available power headroom and a desktop chassis, the RX 570X is the obvious choice — it wins the only head-to-head test, has a higher percentile ranking, and offers 8 GB of memory versus the HD 8950M's 2 GB.

The HD 8950M's only practical advantage is its lower power draw and mobile form factor. If portability is non-negotiable and compute workloads are secondary, the HD 8950M remains a viable option within its performance class. But for any scenario where raw GPU throughput matters, the RX 570X is the definitive winner.

FAQ

Q: How much faster is the AMD Radeon RX 570X than the AMD Radeon HD 8950M in OpenCL?

A: The RX 570X scores 38,939 in Geekbench OpenCL, while the HD 8950M scores 13,772. This gives the RX 570X a 182.7% advantage.

Q: Which GPU has the higher average benchmark score?

A: The RX 570X has an average benchmark score of 13,871, which is 495 points higher than the HD 8950M's 13,376 average.

Q: How do the two GPUs compare in percentile rankings?

A: The RX 570X sits at the 55th percentile among all GPUs, while the HD 8950M sits at the 54th percentile — a one-percentile difference.

Q: What is the memory size difference between the two cards?

A: The RX 570X comes with 8 GB of GDDR5 memory, while the HD 8950M has 2 GB of GDDR5 memory.

Q: Which GPU has a lower power draw?

A: The HD 8950M has a 100 W TDP, while the RX 570X has a 150 W TDP. The HD 8950M is the more power-efficient option.

Q: Do both GPUs support DirectX 12?

A: Yes, both the RX 570X and the HD 8950M support DirectX 12 (12_0) and OpenGL 4.6. They also both support Vulkan, with the RX 570X at version 1.3 and the HD 8950M at version 1.2.170.

Specification Differences

The two GPUs diverge significantly across nearly every specification category. The RX 570X uses a 14 nm process node built at GlobalFoundries, while the HD 8950M uses a 28 nm node from TSMC. The RX 570X packs 5,700 million transistors on a 232 mm² die, yielding a transistor density of 24.6M per mm². The HD 8950M has 2,080 million transistors on a 160 mm² die, with a density of 13.0M per mm².

Clock speeds are only fully specified for the RX 570X, which runs at a base clock of 1168 MHz and a boost clock of 1244 MHz. The HD 8950M has no listed base or boost clocks. Memory clocks also differ: the RX 570X runs at 1750 MHz (7 Gbps effective), while the HD 8950M runs at 1375 MHz (5.5 Gbps effective).

Memory configurations are dramatically different. The RX 570X has 8 GB of GDDR5 on a 256-bit bus with 224.0 GB/s bandwidth. The HD 8950M has 2 GB of GDDR5 on a 128-bit bus with 88.00 GB/s bandwidth. This gives the RX 570X 2.5 times the memory bandwidth.

Compute resources also favor the RX 570X. It has 2048 shading units, 128 texture mapping units (TMUs), and 32 render output units (ROPs). The HD 8950M has 768 shading units, 48 TMUs, and 16 ROPs. Pixel rate is 39.81 GPixel/s for the RX 570X versus 17.20 GPixel/s for the HD 8950M. Texture rate is 159.2 GTexel/s versus 51.60 GTexel/s. FP32 performance is 5.095 TFLOPS for the RX 570X versus 1.651 TFLOPS for the HD 8950M.

Physical characteristics differ as well. The RX 570X is a dual-slot card with 1x 6-pin power connectors and a suggested power supply of 450 W. It measures 241 mm (9.5 inches) in length. The HD 8950M is an MXM Module with no listed power connectors or dimensions. The RX 570X has display outputs of 1x DVI, 1x HDMI 2.0b, and 3x DisplayPort 1.4a, while the HD 8950M's display outputs are listed as "Portable Device Dependent."

Architecture Differences

The architectural gap between these two GPUs spans multiple generations. The RX 570X is built on GCN 4.0 architecture, using the Polaris 20 chip, and belongs to the Polaris (RX 500X) generation. The HD 8950M uses GCN 2.0 architecture, based on the Saturn chip, and belongs to the Solar System (HD 8900M) generation. This means the RX 570X benefits from two full architecture revisions over the HD 8950M.

The process node difference is substantial: 14 nm for the RX 570X versus 28 nm for the HD 8950M. This accounts for the significant transistor density improvement — 24.6M per mm² versus 13.0M per mm² — even as the RX 570X's die is larger at 232 mm² versus 160 mm².

Compute features reflect the generational leap. The RX 570X has FP16 performance rated at 5.095 TFLOPS with a 1:1 ratio to FP32, while the HD 8950M has no listed FP16 capability. The RX 570X also supports Vulkan 1.3, whereas the HD 8950M supports Vulkan 1.2.170. Both support DirectX 12 (12_0) and OpenGL 4.6.

The memory architecture differs fundamentally. The RX 570X's 256-bit bus with 224.0 GB/s bandwidth is more than double the HD 8950M's 128-bit bus with 88.00 GB/s. This, combined with the 8 GB versus 2 GB capacity difference, gives the RX 570X a massive advantage in memory-heavy workloads.

The RX 570X's predecessor is Polaris and its successor is Vega, while the HD 8950M's predecessor is London and its successor is Gem System. The RX 570X has a 150 W TDP and uses a dual-slot form factor, while the HD 8950M has a 100 W TDP and uses an MXM Module form factor. Both are end-of-life products.

Where Each One Wins

The RX 570X wins decisively in compute-intensive workloads. Its Geekbench OpenCL score of 38,939 versus 13,772 for the HD 8950M represents a 182.7% advantage, making it the clear choice for OpenCL-based applications, GPU compute tasks, and any workload that leverages the shading units and memory bandwidth. The RX 570X's 5.095 TFLOPS FP32 performance versus 1.651 TFLOPS for the HD 8950M further reinforces this.

The RX 570X also wins in memory-heavy scenarios. With 8 GB of memory, a 256-bit bus, and 224.0 GB/s bandwidth, it can handle larger textures, higher resolutions, and more complex scenes than the HD 8950M's 2 GB, 128-bit, 88.00 GB/s configuration. For modern gaming or content creation, the RX 570X is the only viable option between the two.

The HD 8950M's advantages are confined to power efficiency and form factor. At 100 W versus 150 W, it draws one-third less power. As an MXM Module, it is designed for laptop or portable systems, whereas the RX 570X requires a desktop chassis with a dual-slot PCIe slot and a 6-pin power connector. For users with an existing MXM-based laptop, the HD 8950M may be the only upgrade path that fits physically.

In terms of average benchmark scores, the RX 570X leads by 495 points (13,871 versus 13,376), but this margin is small enough that the HD 8950M could feel competitive in everyday 2D tasks, where its Passmark G2D-style performance (not directly measured here) likely narrows the gap. However, the RX 570X's percentile ranking of 55 versus 54 for the HD 8950M confirms that even in aggregate, the newer card holds the edge.

For users prioritizing raw performance, the RX 570X wins every measurable category. For users prioritizing portability and power efficiency, the HD 8950M offers a compelling trade-off — but only if the performance deficit is acceptable. The data is unambiguous: the RX 570X is the stronger GPU.

DETAILED SPECIFICATIONS

SPECIFICATION
HD 8950M
RX 570X
Core Specs
Shading Units
768
2,048 +166.7%
Shaders
768
2,048 +166.7%
TMUs
48
128 +166.7%
ROPs
16
32 +100.0%
Compute Units
12
32 +166.7%
Clocks
Base Clock
—
1168 MHz
Boost Clock
—
1244 MHz
GPU Clock
1075 MHz
—
Memory Clock
1375 MHz 5.5 Gbps effective
1750 MHz 7 Gbps effective
Memory
Memory Size
2 GB
8 GB
VRAM (MB)
2,048
8,192 +300.0%
Memory Type
GDDR5
GDDR5
Memory Bus
128 bit
256 bit
Bandwidth
88.00 GB/s
224.0 GB/s
Cache
L1 Cache
16 KB (per CU)
16 KB (per CU)
L2 Cache
256 KB
2 MB
Performance
Pixel Rate
17.20 GPixel/s
39.81 GPixel/s
Texture Rate
51.60 GTexel/s
159.2 GTexel/s
FP32 (TFLOPS)
1.651 TFLOPS
5.095 TFLOPS
FP64 (TFLOPS)
103.2 GFLOPS (1:16)
318.5 GFLOPS (1:16)
FP16 (TFLOPS)
—
5.095 TFLOPS (1:1)
Power
TDP
100 W
150 W
TDP (W)
100
150 +50.0%
Suggested PSU
—
450 W
Power Connectors
—
1x 6-pin
Architecture
Architecture
GCN 2.0
GCN 4.0
GPU Name
Saturn
Polaris 20
Generation
Solar System (HD 8900M)
Polaris (RX 500X)
Process Size
28 nm
14 nm
Transistors
2,080 million
5,700 million
Die Size
160 mm²
232 mm²
Foundry
TSMC
GlobalFoundries
Density
13.0M / mm²
24.6M / mm²
API Support
DirectX
12 (12_0)
12 (12_0)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.3
OpenCL
2.1
2.1
Shader Model
6.5
6.7
Physical
Slot Width
MXM Module
Dual-slot
Length
—
241 mm 9.5 inches
Outputs
Portable Device Dependent
1x DVI1x HDMI 2.0b3x DisplayPort 1.4a
Bus Interface
PCIe 3.0 x16
PCIe 3.0 x16
Other
Production
End-of-life
End-of-life
Predecessor
London
Polaris
Successor
Gem System
Vega
View Radeon HD 8950M Details View Radeon RX 570X Details