AMD Radeon HD 8730M vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison

AMD
RADEON

AMD Radeon HD 8730M

CORE STATE Mars
VRAM 2 GB
CLOCK SPEED 700 MHz
TDP —
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2013
VS
NVIDIA
GEFORCE

GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
5,955
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: AMD Radeon HD 8730M vs NVIDIA GeForce RTX 4070 Ti SUPER AD102

The NVIDIA GeForce RTX 4070 Ti SUPER AD102 and the AMD Radeon HD 8730M represent two entirely different eras of GPU design, separated by over a decade of architectural evolution. The data shows a generational chasm in nearly every measurable specification, from process node and transistor count to memory bandwidth and raw compute throughput. This analysis walks through the benchmark data, architectural differences, and specification gaps to clarify where each part stands in the current hardware landscape.

Where Each One Wins

The benchmark results place these two GPUs in vastly different performance tiers. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 achieves an average benchmark score of 6270 across its tested workload, while the AMD Radeon HD 8730M records a score of 5955 in its benchmark test. While the raw score difference appears modest at roughly 5%, the context of the tests and the hardware behind them tells a more complete story.

The RTX 4070 Ti SUPER AD102 wins decisively in any scenario that demands modern rendering features, high-resolution textures, or ray-traced workloads. Its 16 GB of GDDR6X memory on a 256-bit bus delivers 672.3 GB/s of bandwidth, a figure that dwarfs the HD 8730M’s 28.80 GB/s from 2 GB of DDR3 on a 128-bit bus. The NVIDIA part also supports DirectX 12 Ultimate (12_2), while the AMD part only reaches DirectX 12 (11_1), meaning the newer card can handle the full suite of DX12 Ultimate features.

The AMD Radeon HD 8730M, however, holds relevance in a very different niche. Its 34th percentile ranking among all GPUs places it just below the RTX 4070 Ti SUPER AD102’s 36th percentile, but its 28 nm GCN 1.0 architecture was designed for a generation of laptops where power efficiency and modest 1080p gaming were the targets. The data shows its nearest rivals are all low-end or older parts — the NVIDIA Quadro K620M (0% delta), AMD Radeon HD 8750M (-0.3%), and Intel UHD Graphics 730 (0.4%) — indicating it competes in the entry-level integrated and discrete mobile space, not against modern desktop flagships.

Architecture Differences

The architectural gap between these two GPUs is immense. The RTX 4070 Ti SUPER AD102 is built on TSMC’s 5 nm process and packs 76,300 million transistors into a 609 mm² die, yielding a transistor density of 125.3 million transistors per square millimeter. In contrast, the HD 8730M uses TSMC’s 28 nm node with just 950 million transistors on a 77 mm² die, for a density of 12.3 million transistors per square millimeter. That is a tenfold difference in density and an eightyfold difference in raw transistor count.

NVIDIA’s AD102 chip implements the Ada Lovelace architecture, featuring 8448 shading units, 264 texture mapping units, 96 ROPs, 66 ray tracing cores, and 264 tensor cores. This hardware enables features that simply did not exist in the GCN 1.0 era, such as hardware-accelerated ray tracing and AI-driven tensor operations. The AMD Mars chip, by contrast, offers 384 shading units, 24 TMUs, and 8 ROPs, with no ray tracing or tensor core support whatsoever.

Clock speeds also reflect the architectural evolution. The RTX 4070 Ti SUPER AD102 runs at a 2340 MHz base clock and boosts to 2610 MHz, while the HD 8730M operates at 650 MHz base and 700 MHz boost. Memory technology differs fundamentally as well: GDDR6X at 21 Gbps effective on the NVIDIA side versus DDR3 at 1800 Mbps effective on the AMD side. The bus interface also differs, with PCIe 4.0 x16 on the newer card versus PCIe 3.0 x8 on the older one.

FAQ

Q: Which GPU has the higher benchmark score?

A: The NVIDIA GeForce RTX 4070 Ti SUPER AD102 scores 6270 in the 3DMark Steel Nomad DX12 test, while the AMD Radeon HD 8730M scores 5955 in the Geekbench OpenCL test. The NVIDIA part sits at the 36th percentile of all GPUs, slightly above the AMD part’s 34th percentile.

Q: How do their memory specifications compare?

A: The RTX 4070 Ti SUPER AD102 offers 16 GB of GDDR6X memory on a 256-bit bus with 672.3 GB/s bandwidth. The HD 8730M has 2 GB of DDR3 on a 128-bit bus with 28.80 GB/s bandwidth. The NVIDIA card provides over 23 times the memory bandwidth.

Q: What are the transistor and die size differences?

A: The RTX 4070 Ti SUPER AD102 contains 76,300 million transistors on a 609 mm² die, built on a 5 nm process. The HD 8730M has 950 million transistors on a 77 mm² die, using a 28 nm process. This results in a transistor density of 125.3 million per mm² for the NVIDIA part versus 12.3 million per mm² for the AMD part.

Q: Do both GPUs support ray tracing?

A: No. The RTX 4070 Ti SUPER AD102 includes 66 dedicated ray tracing cores and 264 tensor cores, supporting DirectX 12 Ultimate (12_2). The HD 8730M has no ray tracing or tensor cores and only supports DirectX 12 (11_1).

Q: What are their production statuses and release dates?

A: Both are end-of-life products. The RTX 4070 Ti SUPER AD102 was released on June 9, 2024, while the HD 8730M was released on March 31, 2013. The NVIDIA card’s launch MSRP was 799 USD.

Q: How do their pixel and texture rates differ?

A: The RTX 4070 Ti SUPER AD102 achieves 250.6 GPixel/s pixel rate and 689.0 GTexel/s texture rate. The HD 8730M manages 5.600 GPixel/s and 16.80 GTexel/s. The NVIDIA card is roughly 45 times faster in pixel throughput and 41 times faster in texture throughput.

Specification Differences

| Specification | NVIDIA GeForce RTX 4070 Ti SUPER AD102 | AMD Radeon HD 8730M |

|---|---|---|

| Architecture | Ada Lovelace | GCN 1.0 |

| Process Node | 5 nm | 28 nm |

| Transistors | 76,300 million | 950 million |

| Die Size | 609 mm² | 77 mm² |

| Transistor Density | 125.3M / mm² | 12.3M / mm² |

| Base Clock | 2340 MHz | 650 MHz |

| Boost Clock | 2610 MHz | 700 MHz |

| Memory Size | 16 GB | 2 GB |

| Memory Type | GDDR6X | DDR3 |

| Memory Bus Width | 256 bit | 128 bit |

| Memory Bandwidth | 672.3 GB/s | 28.80 GB/s |

| Shading Units | 8448 | 384 |

| TMUs | 264 | 24 |

| ROPs | 96 | 8 |

| RT Cores | 66 | None |

| Tensor Cores | 264 | None |

| Pixel Rate | 250.6 GPixel/s | 5.600 GPixel/s |

| Texture Rate | 689.0 GTexel/s | 16.80 GTexel/s |

| FP32 Performance | 44.10 TFLOPS | 537.6 GFLOPS |

| FP16 Performance | 44.10 TFLOPS (1:1) | None |

| TDP | 285 W | Not specified |

| Slot Width | Triple-slot | Not specified |

| Power Connectors | 1x 16-pin | Not specified |

| Suggested PSU | 600 W | Not specified |

| Bus Interface | PCIe 4.0 x16 | PCIe 3.0 x8 |

| DirectX Support | 12 Ultimate (12_2) | 12 (11_1) |

| Vulkan Support | 1.4 | 1.2.170 |

| Release Date | 2024-06-09 | 2013-03-31 |

| Predecessor | GeForce 30 | London |

| Successor | GeForce 50 | Gem System |

Head-to-Head Benchmarks

While the FACT PACK provides no direct head-to-head benchmark results between these two GPUs, the individual benchmark scores and nearest rival data offer a clear comparative picture. The RTX 4070 Ti SUPER AD102’s 3DMark Steel Nomad DX12 score of 6269.5 places it at the 36th percentile of all GPUs. Its nearest rivals are the NVIDIA GeForce RTX 5070 Ti SUPER (0% delta), the NVIDIA Quadro K620 (-0.2%), the AMD FirePro W600 (0.8%), and the AMD Radeon R7 M350 (-0.9%). These deltas are all within 1%, indicating that the RTX 4070 Ti SUPER AD102 sits in a tightly clustered performance band among its peers.

The HD 8730M’s Geekbench OpenCL score of 5955 puts it at the 34th percentile. Its nearest rivals include the NVIDIA Quadro K620M (0% delta), AMD Radeon HD 8750M (-0.3%), Intel UHD Graphics 730 (0.4%), and NVIDIA Quadro K4000 (-0.5%). Again, the delta values are minimal, showing that the HD 8730M performs consistently with its immediate contemporaries.

The interpretative leap comes from the specification data. The RTX 4070 Ti SUPER AD102’s FP32 compute of 44.10 TFLOPS is 82 times higher than the HD 8730M’s 537.6 GFLOPS. The pixel rate advantage is 45x, and the texture rate advantage is 41x. Even the memory bandwidth gap — 672.3 GB/s versus 28.80 GB/s — represents a 23x difference. These ratios suggest that in any modern gaming or compute workload, the NVIDIA card would outperform the AMD part by an order of magnitude or more, despite their adjacent percentile rankings, which are likely skewed by the different benchmark suites used.

The Verdict

The data presents an unambiguous conclusion for most use cases. The NVIDIA GeForce RTX 4070 Ti SUPER AD102 is the superior choice for any modern workload involving 3D rendering, ray tracing, high-resolution textures, or AI-assisted features. Its 5 nm Ada Lovelace architecture, 66 ray tracing cores, 264 tensor cores, and 44.10 TFLOPS of FP32 performance place it in an entirely different performance class than the HD 8730M. The 16 GB of GDDR6X memory with 672.3 GB/s bandwidth ensures it can handle large datasets and high-resolution assets without bottlenecking.

The AMD Radeon HD 8730M, however, is not without its place. Its 28 nm GCN 1.0 architecture, 384 shading units, and 2 GB of DDR3 memory were designed for a 2013-era mobile landscape. For legacy software, basic 2D acceleration, or systems where PCIe 3.0 x8 is the only available interface, it remains functional. Its 34th percentile ranking shows it still outperforms the lowest tier of GPUs in the database, and its nearest rivals include integrated graphics like the Intel UHD Graphics 730, meaning it can still handle light, older game titles or general desktop use.

Users building a modern system or upgrading for current-generation games should select the RTX 4070 Ti SUPER AD102 without hesitation, provided they have a 600 W PSU and triple-slot chassis clearance. Users maintaining a legacy laptop or system from the early 2010s may find the HD 8730M adequate for their existing software library, but no modern gaming or compute workload should be expected from it. The benchmark data, architectural details, and specification disparities all point to the same verdict: these are products from different eras, and the newer NVIDIA part wins on every objective measure.

DETAILED SPECIFICATIONS

SPECIFICATION
HD 8730M
RTX 4070 Ti SUPER AD102
Core Specs
Shading Units
384
8,448 +2100.0%
Shaders
384
8,448 +2100.0%
TMUs
24
264 +1000.0%
ROPs
8
96 +1100.0%
Compute Units
6
—
SM Count
—
66
Clocks
Base Clock
650 MHz
2340 MHz
Boost Clock
700 MHz
2610 MHz
Memory Clock
900 MHz 1800 Mbps effective
1313 MHz 21 Gbps effective
Memory
Memory Size
2 GB
16 GB
VRAM (MB)
2,048
16,384 +700.0%
Memory Type
DDR3
GDDR6X
Memory Bus
128 bit
256 bit
Bandwidth
28.80 GB/s
672.3 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
256 KB
48 MB
Performance
Pixel Rate
5.600 GPixel/s
250.6 GPixel/s
Texture Rate
16.80 GTexel/s
689.0 GTexel/s
FP32 (TFLOPS)
537.6 GFLOPS
44.10 TFLOPS
FP64 (TFLOPS)
33.60 GFLOPS (1:16)
689.0 GFLOPS (1:64)
FP16 (TFLOPS)
—
44.10 TFLOPS (1:1)
AI/RT
RT Cores
—
66
Tensor Cores
—
264
Power
TDP
—
285 W
TDP (W)
—
285
Suggested PSU
—
600 W
Power Connectors
—
1x 16-pin
Architecture
Architecture
GCN 1.0
Ada Lovelace
GPU Name
Mars
AD102
Generation
Solar System (HD 8700M)
GeForce 40
Process Size
28 nm
5 nm
Transistors
950 million
76,300 million
Die Size
77 mm²
609 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
125.3M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
3.0
CUDA
—
8.9
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
—
Triple-slot
Length
—
310 mm 12.2 inches
Height
—
140 mm 5.5 inches
Outputs
—
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
PCIe 3.0 x8
PCIe 4.0 x16
Other
Launch Price
—
799 USD
Production
End-of-life
End-of-life
Predecessor
London
GeForce 30
Successor
Gem System
GeForce 50
View Radeon HD 8730M Details View GeForce RTX 4070 Ti SUPER AD102 Details