AMD Radeon HD 8690M vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
AMD Radeon HD 8690M
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon HD 8690M vs NVIDIA RTX PRO 5000 72 GB Blackwell
NVIDIA’s RTX PRO 5000 72 GB Blackwell and AMD’s Radeon HD 8690M occupy opposite ends of the GPU spectrum, separated by over a decade of architecture evolution and a massive gulf in target workload. The RTX PRO 5000 is a current-generation workstation behemoth built on a 5 nm process, while the HD 8690M is an end-of-life mobile part from 2013 on 28 nm silicon. The benchmark data reflects this chasm, with the NVIDIA card posting an average score of 6407 against the AMD’s 6137, though both sit within a narrow percentile band of all GPUs (37th and 36th, respectively). These figures, however, mask the true nature of their performance disparity, as the RTX PRO 5000’s raw compute capabilities dwarf the older mobile chip in every measurable category.
Where Each One Wins
The RTX PRO 5000 72 GB Blackwell is the clear victor in every modern, GPU-intensive workload category. Its benchmark results show dominant scores in DirectX 12 (9579.5 in 3DMark Steel Nomad), Passmark’s G3D suite (24310), and GPU compute (15667). This card is designed for professional visualization, AI inference, and rendering tasks that demand massive memory bandwidth, high FP32 throughput, and dedicated ray tracing and tensor hardware. The data shows that its 72 GB of GDDR7 memory on a 384-bit bus, delivering 1.34 TB/s of bandwidth, is built to handle datasets that would exhaust lesser cards. The RTX PRO 5000 also wins decisively in legacy DirectX 9 tests (311 vs. a non-existent result for AMD), indicating that its driver stack maintains strong performance even on older APIs.
The AMD Radeon HD 8690M, conversely, has no benchmark wins in the provided data. Its single recorded benchmark is a Geekbench OpenCL score of 6137, which is a compute test, not a gaming or graphics rendering measurement. The absence of results for DirectX 9, 10, 11, 12, and G3D tests suggests that the card’s performance in those areas is either negligible or not tested in the current database. The HD 8690M’s strengths, if any, lie in its historical role as a low-power mobile GPU for basic multimedia and light gaming from its era. Based on the numbers, the RTX PRO 5000 is the only viable choice for any modern application, while the HD 8690M is relegated to legacy systems or tasks where its 2 GB frame buffer and 32.00 GB/s bandwidth are sufficient—which is to say, very few.
Architecture Differences
The architectural gulf between these two GPUs is stark. NVIDIA’s RTX PRO 5000 uses the GB202 chip based on Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. This chip packs 92,200 million transistors onto a 750 mm² die, yielding a transistor density of 122.9 million per square millimeter. In contrast, AMD’s HD 8690M uses the Sun chip based on GCN 1.0 architecture, built on a 28 nm process. This older chip contains just 690 million transistors on a 56 mm² die, with a density of 12.3 million per square millimeter. The difference in transistor count alone—over 133 times more on the NVIDIA—explains the performance chasm, even before considering clock speeds and memory subsystems.
Clock speeds further separate the two. The RTX PRO 5000 runs at a base of 1740 MHz with a boost of 2377 MHz, while the HD 8690M operates at a base of 925 MHz and a boost of 975 MHz. The NVIDIA card’s memory runs at 1750 MHz (28 Gbps effective) on GDDR7, whereas the AMD uses 1000 MHz (4 Gbps effective) on GDDR5. The RTX PRO 5000’s shading units number 14,080 with 440 TMUs and 160 ROPs, along with 110 dedicated ray tracing cores and 440 tensor cores. The HD 8690M has only 320 shading units, 20 TMUs, and 8 ROPs, with no dedicated ray tracing or tensor cores. The feature set disparity is equally profound: NVIDIA supports PCIe 5.0 x16, four DisplayPort 2.1b outputs, and DirectX 12 Ultimate (12_2), Vulkan 1.4, and OpenGL 4.6. AMD supports PCIe 3.0 x8, has no listed display outputs, and only achieves DirectX 12 (11_1) and Vulkan 1.2.170.
Head-to-Head Benchmarks
Direct head-to-head benchmark comparisons are limited because the two GPUs have no overlapping test results in the database. However, the available data points provide a clear picture of relative performance. In Passmark’s G3D suite, the RTX PRO 5000 scores 24310, which is a massive number that dwarfs any possible result from the HD 8690M—a card that lacks even a recorded score in this test. Similarly, in GPU compute via Passmark, the NVIDIA card posts 15667, while the AMD’s only compute result is 6137 in Geekbench OpenCL, a different test suite that cannot be directly compared but still suggests a wide gap given the architectural differences.
The RTX PRO 5000’s 3DMark Steel Nomad DX12 score of 9579.5 is a modern, demanding benchmark that the HD 8690M could not run effectively, given its DirectX 12 (11_1) support and 2 GB memory. Even in legacy DirectX 9, where the AMD might have performed better in its prime, the NVIDIA card scores 311 in Passmark’s DirectX 9 test, while the HD 8690M has no score recorded. The average benchmark scores tell a similar story: the RTX PRO 5000 averages 6407, placing it 0.3% ahead of the NVIDIA GeForce GTX 460 SE and 1.1% behind the AMD Radeon Vega 10 Mobile. The HD 8690M averages 6137, which is 0.3% ahead of the Intel Iris Pro Graphics 6200 and 1.2% behind the AMD Radeon HD 6950. These rival comparisons show both cards sitting in a similar percentile range of all GPUs, but that is a statistical artifact of the limited test set, not evidence of comparable real-world performance.
FAQ
Q: Which GPU has better raw compute performance?
A: The RTX PRO 5000. Its Passmark GPU compute score is 15667, and its FP32 throughput is 66.94 TFLOPS. The HD 8690M’s FP32 is 624.0 GFLOPS, and its only compute score is 6137 in Geekbench OpenCL.
Q: What is the memory configuration difference?
A: The RTX PRO 5000 has 72 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The HD 8690M has 2 GB of GDDR5 on a 64-bit bus with 32.00 GB/s bandwidth.
Q: Do both GPUs support ray tracing?
A: No. The RTX PRO 5000 has 110 dedicated ray tracing cores. The HD 8690M has no ray tracing or tensor cores listed.
Q: Which GPU has a higher transistor count?
A: The RTX PRO 5000 has 92,200 million transistors on its GB202 chip. The HD 8690M has 690 million transistors on its Sun chip.
Q: What is the difference in API support?
A: The RTX PRO 5000 supports DirectX 12 Ultimate (12_2), Vulkan 1.4, and OpenGL 4.6. The HD 8690M supports DirectX 12 (11_1), Vulkan 1.2.170, and OpenGL 4.6.
Q: Which GPU has a higher average benchmark score?
A: The RTX PRO 5000 has an average score of 6407, placing it in the 37th percentile of all GPUs. The HD 8690M has an average score of 6137, placing it in the 36th percentile.
Specification Differences
The specification sheets reveal a comprehensive divergence across every major component. The RTX PRO 5000 uses a GB202 chip with Blackwell 2.0 architecture on a 5 nm process, while the HD 8690M uses a Sun chip with GCN 1.0 on 28 nm. The NVIDIA card’s die measures 750 mm² with 92,200 million transistors, versus 56 mm² and 690 million for AMD. Clock speeds differ significantly: the RTX PRO 5000 runs at 1740 MHz base and 2377 MHz boost, while the HD 8690M runs at 925 MHz base and 975 MHz boost. Memory is another major split: 72 GB GDDR7 at 1.34 TB/s on a 384-bit bus for NVIDIA, versus 2 GB GDDR5 at 32.00 GB/s on a 64-bit bus for AMD.
The compute unit counts are incomparable in scale. The RTX PRO 5000 has 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores. The HD 8690M has 320 shading units, 20 TMUs, and 8 ROPs, with no RT or tensor cores. Pixel and texture rates reflect this: NVIDIA achieves 380.3 GPixel/s and 1,045.9 GTexel/s, while AMD manages 7.800 GPixel/s and 19.50 GTexel/s. FP32 performance is 66.94 TFLOPS versus 624.0 GFLOPS. The RTX PRO 5000 also has a 300 W TDP, dual-slot design, 1x 16-pin power connector, and 700 W suggested PSU, while the HD 8690M has none of these fields listed. Bus interfaces differ as well: PCIe 5.0 x16 for NVIDIA versus PCIe 3.0 x8 for AMD. The RTX PRO 5000 is an active product released on 2025-10-20, while the HD 8690M is end-of-life, released on 2013-02-28.