AMD Radeon HD 7970M vs AMD Radeon RX 7600 XT Comparison
AMD Radeon HD 7970M
Radeon RX 7600 XT
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon HD 7970M vs AMD Radeon RX 7600 XT
The Verdict
The data presents a striking generational divide. The AMD Radeon RX 7600 XT and the AMD Radeon HD 7970M are separated by more than a decade of architecture, yet their average benchmark scores place them as near-identical rivals. The RX 7600 XT holds a 0.4% lead in average score, with 17083 versus 17019 for the HD 7970M. This is a razor-thin margin, but the head-to-head benchmark tells a completely different story. In the only shared test, Geekbench OpenCL, the RX 7600 XT scores 92426, which is 443.1% higher than the HD 7970M’s 17019. This massive delta suggests the average score comparison is misleading.
The HD 7970M’s average score is based on a single OpenCL result, while the RX 7600 XT’s average is derived from ten tests, including modern DirectX 12 and Vulkan workloads. The verdict hinges on interpretation: if you look at the raw average, they are nearly tied; if you look at the specific compute test, the RX 7600 XT is in a different league. For any modern workload, the RX 7600 XT is the clear choice. The HD 7970M, being end-of-life and a mobile part, only makes sense in a legacy system where its MXM form factor is required. The data shows that the RX 7600 XT is not just a successor; it is a complete overhaul.
Architecture Differences
The architectural chasm between these two GPUs is vast. The RX 7600 XT is built on the RDNA 3.0 architecture, using the Navi 33 chip, while the HD 7970M relies on the ancient GCN 1.0 architecture with the Wimbledon chip. The manufacturing process has shrunk from 28 nm to 6 nm at TSMC, allowing the RX 7600 XT to pack 13,300 million transistors into a 204 mm² die, compared to the HD 7970M’s 2,800 million transistors on a larger 212 mm² die. This results in a transistor density of 65.2M / mm² for the new part versus a mere 13.2M / mm² for the old one.
The RX 7600 XT features 2048 shading units, 128 texture mapping units, 64 ROPs, and 32 dedicated ray tracing cores. The HD 7970M has 1280 shading units, 80 TMUs, and 32 ROPs, with no ray tracing hardware at all. Clock speeds are dramatically different: the RX 7600 XT boosts to 2755 MHz with a game clock of 2470 MHz, while the HD 7970M has no listed base or boost clocks. Memory configurations diverge sharply as well. The RX 7600 XT has 16 GB of GDDR6 on a 128-bit bus, delivering 288.0 GB/s of bandwidth, whereas the HD 7970M has 2 GB of GDDR5 on a 256-bit bus, yielding 153.6 GB/s. The newer card also supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the older card tops out at DirectX 12 (11_1) and Vulkan 1.2.170.
FAQ
Q: Is the AMD Radeon RX 7600 XT faster than the AMD Radeon HD 7970M?
A: In the only direct comparison available, the Geekbench OpenCL test, the RX 7600 XT scores 92426 versus 17019 for the HD 7970M. This represents a 443.1% advantage for the newer card. However, the average benchmark scores are nearly identical, with the RX 7600 XT at 17083 and the HD 7970M at 17019.
Q: Which GPU has more memory bandwidth?
A: The RX 7600 XT has 288.0 GB/s of bandwidth, while the HD 7970M has 153.6 GB/s. Despite the HD 7970M having a wider 256-bit memory bus, the RX 7600 XT’s faster GDDR6 memory at 18 Gbps effective more than compensates for its narrower 128-bit bus.
Q: Are these GPUs comparable in terms of average performance?
A: Based on the avgBenchmarkScore field, they are nearly tied. The RX 7600 XT averages 17083, and the HD 7970M averages 17019, a delta of just 0.4%. The RX 7600 XT’s nearest rival list includes the HD 7970M with a 0.4% positive delta, while the HD 7970M’s list includes the RX 7600 XT with a -0.4% negative delta.
Q: What are the major feature differences?
A: The RX 7600 XT supports ray tracing with 32 dedicated RT cores, which the HD 7970M lacks entirely. The newer card also has a higher DirectX 12 feature level (12_2 versus 11_1) and a newer Vulkan version (1.4 versus 1.2.170). The RX 7600 XT also offers DisplayPort 2.1 outputs, while the HD 7970M is portable-device dependent.
Q: Which GPU has a higher transistor count?
A: The RX 7600 XT has 13,300 million transistors, which is nearly five times the 2,800 million found on the HD 7970M. This increase is enabled by the smaller 6 nm process node compared to 28 nm.
Q: What is the power draw difference?
A: The RX 7600 XT has a TDP of 190 W, while the HD 7970M has a TDP of 100 W. The newer card requires a 450 W suggested PSU and a single 8-pin connector, whereas the HD 7970M is an MXM module with no power connectors.
Specification Differences
The two GPUs differ across nearly every specification field. The RX 7600 XT uses the RDNA 3.0 architecture with a Navi 33 chip, while the HD 7970M uses GCN 1.0 with a Wimbledon chip. The process node is 6 nm versus 28 nm. Transistor count is 13,300 million versus 2,800 million, with die sizes of 204 mm² and 212 mm² respectively. The RX 7600 XT has a base clock of 1980 MHz, boost clock of 2755 MHz, and game clock of 2470 MHz; the HD 7970M has no base, boost, or game clocks listed. Memory speed is 18 Gbps effective versus 4.8 Gbps effective.
Memory size is 16 GB versus 2 GB, type is GDDR6 versus GDDR5, and bus width is 128 bit versus 256 bit. Bandwidth is 288.0 GB/s versus 153.6 GB/s. Shading units are 2048 versus 1280, TMUs are 128 versus 80, ROPs are 64 versus 32. The RX 7600 XT has 32 RT cores; the HD 7970M has none. Pixel rate is 176.3 GPixel/s versus 27.20 GPixel/s, texture rate is 352.6 GTexel/s versus 68.00 GTexel/s, and FP32 is 22.57 TFLOPS versus 2.176 TFLOPS. TDP is 190 W versus 100 W. Slot width is dual-slot versus MXM Module. Bus interface is PCIe 4.0 x8 versus MXM-B (3.0).
Display outputs are 1x HDMI 2.1a with 3x DisplayPort 2.1 versus portable-device dependent. DirectX support is 12 Ultimate (12_2) versus 12 (11_1). Vulkan support is 1.4 versus 1.2.170. Dimensions are 204 mm by 115 mm for the RX 7600 XT, while the HD 7970M has no listed dimensions. Production status is Active versus End-of-life. Release dates are 2024-01-23 versus 2012-04-23. The RX 7600 XT has a launch MSRP of 329 USD.
Head-to-Head Benchmarks
The single head-to-head benchmark result is decisive. In the Geekbench OpenCL test, the RX 7600 XT scores 92426, while the HD 7970M scores 17019. This gives the RX 7600 XT a 443.1% advantage, marking it as the definitive winner of this test. The sheer magnitude of this delta suggests that the OpenCL workload is heavily dependent on the architectural improvements found in RDNA 3.0.
Looking at the broader benchmark suite for the RX 7600 XT, its performance in other tests is also notable. In 3DMark Steel Nomad DX12, it scores 2348. In Geekbench Vulkan, it scores 48366. Passmark tests show scores of 85 for DirectX 10, 167 for DirectX 11, 65 for DirectX 12, 228 for DirectX 9, 1030 for G2D, 17132 for G3D, and 8987 for GPU Compute. The HD 7970M has no results for these tests in the data, making a direct comparison impossible. However, the RX 7600 XT’s percentile rank of 60 against all GPUs matches the HD 7970M’s percentile, which is also 60.
The average benchmark scores are deceptively close. The RX 7600 XT’s avgBenchmarkScore of 17083 is only 0.4% higher than the HD 7970M’s 17019. Yet this convergence is an artifact of the HD 7970M having only one benchmark result. The RX 7600 XT’s nearest rivals include the NVIDIA GeForce GTX 690 (17037, delta 0.3%), the HD 7970M (17019, delta 0.4%), the NVIDIA GeForce RTX 3070 (17208, delta -0.7%), and the NVIDIA Tesla M4 (16932, delta 0.9%). The HD 7970M’s rivals include the GTX 690 (17037, delta -0.1%), the RX 7600 XT (17083, delta -0.4%), the Tesla M4 (16932, delta 0.5%), and the RTX 3070 (17208, delta -1.1%). This shows both cards are in a similar average performance tier, but the modern card’s peak performance is far higher.
Where Each One Wins
The RX 7600 XT wins decisively in compute-heavy workloads. Its Geekbench OpenCL score of 92426 dwarfs the HD 7970M’s 17019, indicating a massive advantage in general-purpose GPU computing. The data also shows the RX 7600 XT supports modern APIs like DirectX 12 Ultimate and Vulkan 1.4, making it the only viable option for contemporary games and applications that leverage these features. Its 16 GB of memory is eight times larger than the HD 7970M’s 2 GB, which is critical for high-resolution textures and large datasets. The presence of 32 RT cores means it can handle ray-traced workloads, a feature entirely absent from the HD 7970M.
The HD 7970M has virtually no wins in the data. Its only benchmark result is the OpenCL test where it loses by 443.1%. Its advantages are limited to physical characteristics: a lower TDP of 100 W versus 190 W, and its MXM module form factor, which is suited for laptops. It has no ray tracing support, a smaller memory pool, and older API support. The HD 7970M’s only potential niche is in legacy systems where its 256-bit memory bus and specific mobile form factor are required, but even then, its 153.6 GB/s bandwidth is lower than the RX 7600 XT’s 288.0 GB/s. The data clearly shows the RX 7600 XT is superior in every measurable performance category, leaving the HD 7970M as a historical artifact.