AMD Instinct MI455X vs NVIDIA GeForce RTX 5060 Ti 16 GB Comparison

AMD
RADEON

AMD Instinct MI455X

CORE STATE MI450 256CU
VRAM 432 GB
CLOCK SPEED 2400 MHz
TDP 2300 W
BUS WIDTH 24576 bit
ARCHITECTURE CDNA 5.0
nm
PROCESS 2 nm
LAUNCH DATE 2026
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 16 GB

CORE STATE GB206
VRAM 16 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
144
passmark_directx_11
N/A
219
passmark_directx_12
N/A
89
passmark_directx_9
N/A
238
passmark_g2d
N/A
1,206
passmark_g3d
N/A
22,618
passmark_gpu_compute
N/A
11,224

Analysis: AMD Instinct MI455X vs NVIDIA GeForce RTX 5060 Ti 16 GB

AMD Instinct MI455X and NVIDIA GeForce RTX 5060 Ti 16 GB occupy opposite ends of the hardware spectrum. The database records no direct head-to-head benchmark entries for this pairing, so the comparison rests on the recorded specifications, the RTX 5060 Ti’s measured results, and the relative positioning of each part. The MI455X is a compute-oriented accelerator with no display outputs and no API support for DirectX, OpenGL, or Vulkan, while the RTX 5060 Ti is a fully featured consumer graphics card with active production status. Their intended roles diverge sharply, and the data confirms that each is built for a different workload class.

Head-to-Head Benchmarks

The database contains eight benchmark scores for the RTX 5060 Ti, while the MI455X has no recorded benchmark entries. In the absence of direct measurements, the RTX 5060 Ti’s results stand as the only empirical performance data available for this comparison. Its highest recorded score is 22,618 in Passmark G3D, a full-system graphics test. Its Passmark GPU Compute score of 11,224 indicates substantial compute throughput for a consumer card. The 3DMark Steel Nomad DX12 result of 4,019 places it in a mid-range position for modern gaming workloads.

The nearest rivals listed for the RTX 5060 Ti provide context for its average benchmark score of 4,970. The NVIDIA Quadro 4000 averages 4,979, which is 0.2% higher. The AMD Radeon R7 Graphics averages 4,998, 0.6% higher. The AMD Radeon R7 M360 and R7 M265 both average 4,931 and 4,929 respectively, each 0.8% lower. These deltas are all under one percent, meaning the RTX 5060 Ti’s average sits essentially at parity with a cluster of older and lower-tier parts. Its percentile of 29 against all GPUs indicates that roughly 71% of recorded graphics cards score higher on average.

The MI455X has no benchmarks and an average score of zero, placing it at the 50th percentile in the database. That percentile is a placeholder, not a performance measurement, because no workload results exist to rank. The RTX 5060 Ti’s Passmark DirectX 9 score of 238 and DirectX 11 score of 219 show legacy API strength, while its DirectX 12 score of 89 and DirectX 10 score of 144 are lower. The Passmark G2D score of 1,206 indicates the card’s 2D acceleration capabilities, which the MI455X cannot match because it has no display outputs or graphics API support.

FAQ

Q: Does the AMD Instinct MI455X support any graphics APIs?

A: No. The database lists DirectX, OpenGL, and Vulkan as N/A for the MI455X, and it has no display outputs, so it cannot render to a screen or run standard graphics applications.

Q: What is the RTX 5060 Ti’s percentile ranking among all GPUs?

A: The RTX 5060 Ti sits at the 29th percentile, meaning the database records over 71% of GPUs with higher average scores. Its nearest rivals, such as the NVIDIA Quadro 4000 and AMD Radeon R7 Graphics, are within 0.6% of its average score.

Q: How much memory does each card have?

A: The MI455X has 432 GB of HBM4 memory on a 24,576-bit bus with 23.3 TB/s of bandwidth. The RTX 5060 Ti has 16 GB of GDDR7 memory on a 128-bit bus with 448.0 GB/s of bandwidth.

Q: What are the FP32 compute figures for both cards?

A: The MI455X delivers 157.3 TFLOPS of FP32 performance, with FP16 also at 157.3 TFLOPS in a 1:1 ratio. The RTX 5060 Ti delivers 23.70 TFLOPS of FP32 and the same 23.70 TFLOPS for FP16.

Q: Does the MI455X have any benchmark scores in the database?

A: No. Its benchmark list is empty, its average score is 0, and its 50th percentile ranking reflects the absence of recorded measurements rather than a tested result.

Q: What power delivery does each card require?

A: The MI455X has a 2,300 W TDP and a suggested PSU of 2,700 W, with no power connectors listed because it uses an EAM Module slot. The RTX 5060 Ti has a 180 W TDP, a suggested PSU of 450 W, and a single 8-pin power connector.

Architecture Differences

The MI455X uses the MI450 256CU chip built on CDNA 5.0 architecture, fabricated on a 2 nm process at TSMC with 320,000 million transistors on a 2,990 mm² die. That yields a transistor density of 107.0M per mm². The RTX 5060 Ti uses the GB206 chip on Blackwell 2.0 architecture, also from TSMC but on a 5 nm process with 21,900 million transistors on an 181 mm² die, giving a density of 121.0M per mm². The MI455X has 32,768 shading units and 1,024 texture mapping units, but zero ROPs and no listed RT or tensor cores. Its texture rate is 2,457.6 GTexel/s, and its pixel rate is 0 MPixel/s because it cannot output pixels. The RTX 5060 Ti has 4,608 shading units, 144 TMUs, 48 ROPs, 36 RT cores, and 144 tensor cores. Its texture rate is 370.4 GTexel/s and its pixel rate is 123.5 GPixel/s.

The memory subsystems are fundamentally different. The MI455X uses HBM4 across a 24,576-bit bus to reach 23.3 TB/s of bandwidth, while the RTX 5060 Ti uses GDDR7 across a 128-bit bus for 448.0 GB/s. Clock behavior also diverges heavily: the MI455X has a base clock of 1,000 MHz and a boost of 2,400 MHz, with memory at 1,900 MHz or 7.6 Gbps effective. The RTX 5060 Ti runs at a base of 2,407 MHz and boost of 2,572 MHz, with memory at 1,750 MHz or 28 Gbps effective. The MI455X connects via PCIe 6.0 x16, while the RTX 5060 Ti uses PCIe 5.0 x8. The MI455X has no API support, whereas the RTX 5060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.

The Verdict

The data points to two separate buyers. The MI455X is a massive compute accelerator: its 157.3 TFLOPS of FP32, 432 GB of HBM4 memory, and 23.3 TB/s of bandwidth are orders of magnitude beyond the RTX 5060 Ti’s 23.70 TFLOPS, 16 GB, and 448.0 GB/s. Its 2 nm CDNA 5.0 chip with 320,000 million transistors targets data-center scale workloads that do not require a display. The absence of ROPs, display outputs, and graphics APIs confirms it is not a card for rendering frames to a monitor. The 2,300 W TDP and 2,700 W suggested PSU reinforce that this is infrastructure, not a desktop component.

The RTX 5060 Ti serves the consumer segment with active production status, a 180 W TDP, a single 8-pin connector, and a 450 W suggested PSU. Its 36 RT cores and 144 tensor cores enable ray tracing and AI-accelerated workloads, and its DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 support cover modern gaming APIs. Its measured Passmark G3D score of 22,618 and 3DMark Steel Nomad score of 4,019 demonstrate real, tested performance. Its 29th percentile ranking, however, places it below a majority of recorded GPUs, and its nearest rivals are within 0.8% of its average score, indicating mid-pack positioning among the database’s entries. The MI455X’s 50th percentile is not comparable because it reflects no data.

For compute density, memory capacity, and raw FP32 throughput, the MI455X clearly dominates. For gaming, display output, and standard graphics API workloads, the RTX 5060 Ti is the only viable option between the two. The MI455X cannot run the benchmarks the RTX 5060 Ti scores on, and the RTX 5060 Ti lacks the memory bandwidth and compute scale of the MI455X.

Specification Differences

The two cards differ across nearly every recorded specification. The MI455X uses a 2 nm process, the RTX 5060 Ti uses 5 nm. Transistor counts are 320,000 million versus 21,900 million, and die sizes are 2,990 mm² versus 181 mm². Transistor density favors the RTX 5060 Ti at 121.0M per mm² over 107.0M per mm². Base clocks are 1,000 MHz versus 2,407 MHz, and boost clocks are 2,400 MHz versus 2,572 MHz. Memory sizes are 432 GB versus 16 GB, types are HBM4 versus GDDR7, bus widths are 24,576 bit versus 128 bit, and bandwidths are 23.3 TB/s versus 448.0 GB/s.

Shading units number 32,768 versus 4,608, TMUs 1,024 versus 144, and ROPs 0 versus 48. The RTX 5060 Ti lists 36 RT cores and 144 tensor cores; the MI455X lists none. Pixel rates are 0 MPixel/s versus 123.5 GPixel/s, and texture rates are 2,457.6 GTexel/s versus 370.4 GTexel/s. FP32 and FP16 are 157.3 TFLOPS for the MI455X versus 23.70 TFLOPS for the RTX 5060 Ti. TDPs are 2,300 W versus 180 W, slot widths are EAM Module versus Dual-slot, and power connectors are none versus 1x 8-pin. Suggested PSUs are 2,700 W versus 450 W. Bus interfaces are PCIe 6.0 x16 versus PCIe 5.0 x8. Display outputs are none versus 1x HDMI 2.1b and 3x DisplayPort 2.1b. The RTX 5060 Ti has DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4; the MI455X has N/A for all. Release dates are 2026-07-22 for the MI455X and 2025-04-15 for the RTX 5060 Ti. The RTX 5060 Ti has a launch MSRP of 429 USD. The MI455X has no MSRP recorded.

Where Each One Wins

The MI455X wins on raw compute throughput. Its 157.3 TFLOPS FP32 is roughly 6.6 times the RTX 5060 Ti’s 23.70 TFLOPS. Its 432 GB of memory is 27 times larger, and its 23.3 TB/s bandwidth is over 52 times higher. The 24,576-bit memory bus and HBM4 type point to memory-bound compute tasks where the RTX 5060 Ti’s 448.0 GB/s would bottleneck. The MI455X also leads in texture rate at 2,457.6 GTexel/s versus 370.4 GTexel/s, and its PCIe 6.0 x16 interface doubles the link generation of the RTX 5060 Ti’s PCIe 5.0 x8. Its 2 nm process and 320,000 million transistors indicate a design scaled for maximum arithmetic density.

The RTX 5060 Ti wins on every consumer-facing metric. It has 48 ROPs and a 123.5 GPixel/s pixel rate, while the MI455X has none. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, all of which are N/A on the MI455X. It has display outputs, the MI455X has none. Its 36 RT cores and 144 tensor cores enable ray tracing and AI workloads that the MI455X cannot run through standard graphics APIs. Its 180 W TDP and 450 W suggested PSU fit standard desktop power budgets, while the MI455X demands 2,300 W and 2,700 W. The RTX 5060 Ti also has measured benchmark results, including a 22,618 Passmark G3D score and 4,019 in 3DMark Steel Nomad, confirming real-world-testable performance. The MI455X has zero recorded scores.

For gaming, desktop rendering, and any workload requiring a display, the RTX 5060 Ti is the only choice. For massive parallel compute, memory capacity, and bandwidth, the MI455X is the dominant part. The database shows no overlap in their functional capabilities, so the selection depends entirely on workload type.

DETAILED SPECIFICATIONS

SPECIFICATION
Instinct MI455X
RTX 5060 Ti 16 GB
Core Specs
Shading Units
32,768
4,608 -85.9%
Shaders
32,768
4,608 -85.9%
TMUs
1,024
144 -85.9%
ROPs
0
48 +∞%
Compute Units
256
—
SM Count
—
36
Clocks
Base Clock
1000 MHz
2407 MHz
Boost Clock
2400 MHz
2572 MHz
Memory Clock
1900 MHz 7.6 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
432 GB
16 GB
VRAM (MB)
442,368
16,384 -96.3%
Memory Type
HBM4
GDDR7
Memory Bus
24576 bit
128 bit
Bandwidth
23.3 TB/s
448.0 GB/s
Cache
L1 Cache
32 KB (per CU)
128 KB (per SM)
L2 Cache
192 MB
32 MB
Performance
Pixel Rate
0 MPixel/s
123.5 GPixel/s
Texture Rate
2,457.6 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
157.3 TFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
2.458 TFLOPS (1:64)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
157.3 TFLOPS (1:1)
23.70 TFLOPS (1:1)
AI/RT
RT Cores
—
36
Tensor Cores
—
144
Matrix Cores
1,024
—
Power
TDP
2300 W
180 W
TDP (W)
2,300
180 -92.2%
Suggested PSU
2700 W
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
CDNA 5.0
Blackwell 2.0
GPU Name
MI450 256CU
GB206
Generation
Instinct (MIx)
GeForce 50
Process Size
2 nm
5 nm
Transistors
320,000 million
21,900 million
Die Size
2990 mm²
181 mm²
Foundry
TSMC
TSMC
Density
107.0M / mm²
121.0M / mm²
API Support
DirectX
—
12 Ultimate (12_2)
OpenGL
—
4.6
Vulkan
—
1.4
OpenCL
3.0
3.0
CUDA
—
12.0
Shader Model
—
6.9
Physical
Slot Width
EAM Module
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 6.0 x16
PCIe 5.0 x8
Other
Launch Price
—
429 USD
Production
—
Active
Predecessor
Radeon Instinct
GeForce 40
Successor
—
GeForce 60
View Instinct MI455X Details View GeForce RTX 5060 Ti 16 GB Details