AMD Instinct MI455X vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison
AMD Instinct MI455X
GeForce RTX 4070 Ti SUPER AD102
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI455X vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
The Verdict
The AMD Instinct MI455X and NVIDIA GeForce RTX 4070 Ti SUPER AD102 serve fundamentally different purposes, and the data makes that split clear. The MI455X is an Instinct-series compute accelerator with no display outputs, no DirectX support, and a 2300 W power envelope. It targets raw throughput workloads where graphics output is irrelevant. The RTX 4070 Ti SUPER AD102 is a GeForce 40-series consumer card with full display outputs, DirectX 12 Ultimate support, and a 285 W power draw. It targets gaming and workstation graphics.
The MI455X delivers 157.3 TFLOPS of FP32 and FP16 performance, while the RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS in both formats. That is a 3.57x FP32 advantage for the AMD part. However, the RTX 4070 Ti SUPER AD102 is the only one of the two with any recorded benchmark score: 6269.5 in 3DMark Steel Nomad DX12, with an average of 6270. The MI455X has no benchmark entries and a 50th percentile rank versus all GPUs, while the RTX 4070 Ti SUPER AD102 sits at the 36th percentile. The NVIDIA part also has a nearest rival, the RTX 5070 Ti SUPER, with an identical average score of 6270 and a delta of 0 percent. The Quadro K620 trails by 0.2 percent, the FirePro W600 leads by 0.8 percent, and the Radeon R7 M350 trails by 0.9 percent.
For buyers needing a graphics card with outputs, drivers, and gaming APIs, the RTX 4070 Ti SUPER AD102 is the only option. For buyers running compute workloads that can use 432 GB of HBM4 memory and 23.3 TB/s of bandwidth, the MI455X is the only option. The data does not show overlap.
Architecture Differences
The MI455X uses the CDNA 5.0 architecture, built on a 2 nm process at TSMC. The RTX 4070 Ti SUPER AD102 uses Ada Lovelace, built on a 5 nm process, also at TSMC. The MI455X packs 320,000 million transistors on a 2990 mm² die, for a density of 107.0 million transistors per mm². The NVIDIA part packs 76,300 million transistors on a 609 mm² die, for a density of 125.3 million per mm². Despite the smaller node, the AMD chip has lower transistor density, indicating a design optimized for massive memory controllers and compute arrays rather than density.
The MI455X uses the MI450 256CU chip. It has 32768 shading units and 1024 texture mapping units, with zero ROPs. It has no ray tracing cores and no tensor cores listed. The RTX 4070 Ti SUPER AD102 uses the AD102 chip with 8448 shading units, 264 TMUs, 96 ROPs, 66 RT cores, and 264 tensor cores. The AMD part reports a pixel rate of 0 MPixel/s, consistent with a compute-only accelerator that has no display pipeline. The NVIDIA part reports 250.6 GPixel/s and 689.0 GTexel/s, while the AMD part reports 2,457.6 GTexel/s.
Memory architecture diverges sharply. The MI455X uses 432 GB of HBM4 on a 24576-bit bus, delivering 23.3 TB/s of bandwidth. The RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X on a 256-bit bus, delivering 672.3 GB/s. The AMD memory clock is listed as 1900 MHz with 7.6 Gbps effective, while the NVIDIA memory clock is 1313 MHz with 21 Gbps effective. The AMD part has no display outputs, no power connectors listed, and uses an EAM Module slot width. The NVIDIA part is triple-slot, uses a 1x 16-pin connector, and lists a suggested PSU of 600 W versus 2700 W for the AMD part.
The MI455X uses PCIe 6.0 x16, while the RTX 4070 Ti SUPER AD102 uses PCIe 4.0 x16. The AMD part lists no DirectX, OpenGL, or Vulkan support. The NVIDIA part supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Where Each One Wins
The MI455X wins on sheer compute throughput. Its 157.3 TFLOPS FP32 and FP16 figures are roughly 3.57x the 44.10 TFLOPS of the NVIDIA part. Its texture rate of 2,457.6 GTexel/s is 3.57x the 689.0 GTexel/s of the RTX 4070 Ti SUPER AD102. The memory bandwidth gap is even larger: 23.3 TB/s versus 672.3 GB/s, a 34.7x advantage. The 432 GB capacity versus 16 GB is a 27x difference. The MI455X also uses a newer PCIe interface, 6.0 x16 versus 4.0 x16, and a newer memory type, HBM4 versus GDDR6X.
The RTX 4070 Ti SUPER AD102 wins on any task requiring graphics output. It has display outputs, 1x HDMI 2.1 and 3x DisplayPort 1.4a, while the MI455X has none. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, while the MI455X supports none. It has 96 ROPs for rasterization, while the MI455X has zero. It has 66 RT cores and 264 tensor cores, while the MI455X has none listed. The NVIDIA part also wins on power efficiency in absolute terms: 285 W versus 2300 W, a 8.1x difference in favor of the smaller card.
The recorded benchmark data only exists for the NVIDIA part. Its 3DMark Steel Nomad DX12 score of 6269.5 places it at the 36th percentile among all GPUs. The MI455X has no recorded benchmark scores and a 50th percentile placeholder rank, which means the database has no measured performance data for it. The RTX 4070 Ti SUPER AD102 matches its nearest rival, the RTX 5070 Ti SUPER, at 6270 average score with a 0 percent delta.
FAQ
Q: Which card has more FP32 compute power?
A: The AMD Instinct MI455X delivers 157.3 TFLOPS of FP32, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS. The AMD part has a 3.57x advantage in raw FP32 throughput.
Q: Does the AMD Instinct MI455X support gaming APIs?
A: No. The MI455X lists no DirectX, OpenGL, or Vulkan support. The RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Q: What memory configurations do the two cards use?
A: The MI455X uses 432 GB of HBM4 on a 24576-bit bus with 23.3 TB/s bandwidth. The RTX 4070 Ti SUPER AD102 uses 16 GB of GDDR6X on a 256-bit bus with 672.3 GB/s bandwidth.
Q: Which card has display outputs?
A: Only the RTX 4070 Ti SUPER AD102 has display outputs: 1x HDMI 2.1 and 3x DisplayPort 1.4a. The MI455X has no outputs and a pixel rate of 0 MPixel/s.
Q: What is the power requirement difference?
A: The MI455X has a TDP of 2300 W and a suggested PSU of 2700 W. The RTX 4070 Ti SUPER AD102 has a TDP of 285 W and a suggested PSU of 600 W.
Q: How does the RTX 4070 Ti SUPER AD102 compare to its nearest rival?
A: The RTX 4070 Ti SUPER AD102 averages 6270 in benchmarks. Its nearest rival, the NVIDIA GeForce RTX 5070 Ti SUPER, also averages 6270, for a 0 percent delta. The AMD FirePro W600 scores 6223, 0.8 percent lower, while the Quadro K620 scores 6282, 0.2 percent higher.
Head-to-Head Benchmarks
There are no directly recorded head-to-head benchmark entries in the database for these two products. The MI455X has no benchmark scores at all. The RTX 4070 Ti SUPER AD102 has a single entry: 3DMark Steel Nomad DX12 with a score of 6269.5. Its average benchmark score is 6270.
The nearest rival data for the RTX 4070 Ti SUPER AD102 provides context. The RTX 5070 Ti SUPER matches it exactly at 6270, a 0 percent delta. The Quadro K620 scores 6282, which is 0.2 percent higher. The AMD FirePro W600 scores 6223, which is 0.8 percent lower. The AMD Radeon R7 M350 scores 6327, which is 0.9 percent lower than the RTX 4070 Ti SUPER AD102. These deltas show that the RTX 4070 Ti SUPER AD102 sits in a tight cluster where differences are within 1 percent.
The MI455X cannot be included in any benchmark comparison because the database contains no measured scores for it. Its percentile rank of 50 is a placeholder, not a measured result. The FP32 and FP16 figures of 157.3 TFLOPS are identical, indicating a 1:1 ratio, whereas the RTX 4070 Ti SUPER AD102 also has a 1:1 ratio at 44.10 TFLOPS. The texture rate difference, 2,457.6 GTexel/s versus 689.0 GTexel/s, mirrors the FP32 ratio. The pixel rate difference is absolute: 0 MPixel/s versus 250.6 GPixel/s.
Specification Differences
The two cards differ across every major specification category except for foundry, which is TSMC for both.
Process node: The MI455X uses 2 nm, while the RTX 4070 Ti SUPER AD102 uses 5 nm.
Transistors and die: The MI455X has 320,000 million transistors on a 2990 mm² die. The RTX 4070 Ti SUPER AD102 has 76,300 million transistors on a 609 mm² die. Transistor density is 107.0M per mm² for AMD and 125.3M per mm² for NVIDIA.
Clocks: The MI455X has a 1000 MHz base and 2400 MHz boost. The RTX 4070 Ti SUPER AD102 has a 2340 MHz base and 2610 MHz boost. Memory clocks are 1900 MHz with 7.6 Gbps effective for AMD, and 1313 MHz with 21 Gbps effective for NVIDIA.
Memory: The MI455X has 432 GB of HBM4 on a 24576-bit bus with 23.3 TB/s bandwidth. The RTX 4070 Ti SUPER AD102 has 16 GB of GDDR6X on a 256-bit bus with 672.3 GB/s bandwidth.
Compute units: The MI455X has 32768 shading units, 1024 TMUs, and 0 ROPs. The RTX 4070 Ti SUPER AD102 has 8448 shading units, 264 TMUs, and 96 ROPs. The MI455X has no RT cores or tensor cores listed; the NVIDIA part has 66 RT cores and 264 tensor cores.
Rates: Pixel rate is 0 MPixel/s for AMD and 250.6 GPixel/s for NVIDIA. Texture rate is 2,457.6 GTexel/s for AMD and 689.0 GTexel/s for NVIDIA. FP32 and FP16 are both 157.3 TFLOPS for AMD and 44.10 TFLOPS for NVIDIA.
Power and cooling: TDP is 2300 W for AMD and 285 W for NVIDIA. Suggested PSU is 2700 W versus 600 W. Slot width is EAM Module for AMD and triple-slot for NVIDIA. Power connectors are listed as none for AMD and 1x 16-pin for NVIDIA.
Interface and outputs: Bus interface is PCIe 6.0 x16 for AMD and PCIe 4.0 x16 for NVIDIA. Display outputs are none for AMD and 1x HDMI 2.1 plus 3x DisplayPort 1.4a for NVIDIA.
APIs: AMD lists no DirectX, OpenGL, or Vulkan support. NVIDIA lists DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4.
Dimensions: Only the NVIDIA part has recorded dimensions: 310 mm length, 140 mm height, and 61 mm width. The AMD part has none listed.
Release and status: The MI455X has a release date of July 22, 2026, with no production status listed. The RTX 4070 Ti SUPER AD102 has a release date of June 9, 2024, and is marked end-of-life. The NVIDIA part has a launch MSRP of 799 USD. The AMD part has no launch MSRP. The NVIDIA part has a predecessor in GeForce 30 and a successor in GeForce 50. The AMD part lists Radeon Instinct as its predecessor and no successor.