AMD Instinct MI300 vs NVIDIA GeForce RTX 4060 Ti 16 GB Comparison
AMD Instinct MI300
GeForce RTX 4060 Ti 16 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Instinct MI300 vs NVIDIA GeForce RTX 4060 Ti 16 GB
Where Each One Wins
The AMD Instinct MI300 and NVIDIA GeForce RTX 4060 Ti 16 GB occupy entirely different corners of the hardware landscape. The MI300 is a compute accelerator with no display outputs, no graphics API support, and a zero pixel rate. Its recorded benchmark percentile sits at 50, with an average benchmark score of 0, meaning the database contains no gaming or graphics workload results for this part. The RTX 4060 Ti 16 GB, by contrast, is a consumer graphics card with a recorded 3DMark Steel Nomad DX12 score of 2907, placing it in the 18th percentile of all GPUs. This split immediately indicates that the MI300 is not designed for the same tasks as the RTX 4060 Ti, and any comparison of benchmark wins must acknowledge that the MI300 has no measured wins in conventional graphics tests.
The RTX 4060 Ti 16 GB wins in every measurable graphics benchmark category because it is the only one of the two with any benchmark entries. Its nearest rivals in the database include the NVIDIA RTX PRO 4000 Blackwell SFF with an average score of 2910 and a delta of -0.1 percent, the RTX 4060 Ti 8 GB at 2913 with a -0.2 percent delta, the RTX 4010 at 2893 with a 0.5 percent delta, and the Quadro P600 at 2923 with a -0.5 percent delta. The recorded data shows the 16 GB variant is essentially tied with the 8 GB version, just 0.2 percent behind, and sits within a narrow band of 30 points across all four rivals. The MI300's 50th percentile ranking with zero average score suggests it is not intended for the same benchmark suite, and the database records no wins for it in any test.
Architecture Differences
The architectural gap between these two is substantial. The MI300 uses AMD's CDNA 3.0 architecture with the Aqua Vanjaram chip, built on a 5 nm TSMC process. It packs 153,000 million transistors onto a 1017 mm² die, yielding a transistor density of 150.4 million per square millimeter. The RTX 4060 Ti 16 GB uses NVIDIA's Ada Lovelace architecture with the AD106 chip, also on a 5 nm TSMC process, but with 22,900 million transistors on an 188 mm² die, for a density of 121.8 million per square millimeter. The MI300's die is more than five times larger and holds nearly seven times the transistors.
Memory architecture diverges sharply. The MI300 carries 128 GB of HBM3 on an 8192-bit bus, delivering 5.32 TB/s of bandwidth. The RTX 4060 Ti 16 GB uses 16 GB of GDDR6 on a 128-bit bus with 288.0 GB/s. The MI300's memory bandwidth is over 18 times higher, and its capacity is eight times greater. The RTX 4060 Ti has 4352 shading units, 136 texture mapping units, 48 raster output units, 34 ray tracing cores, and 136 tensor cores. The MI300 lists 14080 shading units and 880 TMUs, but zero ROPs and no ray tracing or tensor core counts. The MI300's pixel rate is 0 MPixel/s, while its texture rate is 1,496.0 GTexel/s versus the RTX 4060 Ti's 344.8 GTexel/s.
Clock behavior also differs. The MI300 runs at a 1000 MHz base and 1700 MHz boost, with memory at 1300 MHz or 5.2 Gbps effective. The RTX 4060 Ti runs at 2310 MHz base and 2535 MHz boost, with memory at 2250 MHz or 18 Gbps effective. The RTX 4060 Ti has much higher core clocks, but the MI300 compensates with far more compute units and wider memory. The MI300's FP32 throughput is 47.87 TFLOPS, while the RTX 4060 Ti delivers 22.06 TFLOPS, both at 1:1 FP16 ratios. The MI300 is more than double the RTX 4060 Ti in raw FP32 compute.
Head-to-Head Benchmarks
The database records no head-to-head benchmark entries between these two parts. The wins count shows zero for both the MI300 (winsA: 0) and the RTX 4060 Ti (winsB: 0). This absence is itself informative: the MI300 has no entries in the benchmark suite that produced the RTX 4060 Ti's 3DMark Steel Nomad DX12 score. The MI300's average benchmark score is 0, and its percentile versus all GPUs is 50, which likely reflects its absence from the gaming-oriented test set rather than a competitive performance level.
For the RTX 4060 Ti 16 GB, the single recorded benchmark result is 2907 in 3DMark Steel Nomad DX12. Its nearest rivals show how tightly clustered this score is. The RTX PRO 4000 Blackwell SFF scores 2910, just 0.1 percent higher. The RTX 4060 Ti 8 GB scores 2913, 0.2 percent higher. The RTX 4010 scores 2893, 0.5 percent lower. The Quadro P600 scores 2923, 0.5 percent higher. The 16 GB model sits in the middle of a group spanning less than 1.1 percent total variation. The data suggests the 16 GB memory configuration does not meaningfully shift the measured graphics score compared to the 8 GB version, with a delta of only -0.2 percent.
The FP32 compute comparison, however, tells a different story. The MI300's 47.87 TFLOPS more than doubles the RTX 4060 Ti's 22.06 TFLOPS. Texture rate follows a similar pattern: 1,496.0 GTexel/s versus 344.8 GTexel/s, a 4.3 times advantage for the MI300. Bandwidth is even more lopsided at 5.32 TB/s versus 288.0 GB/s. These figures indicate that in compute-heavy workloads where the MI300 can operate, it would vastly outperform the RTX 4060 Ti, but the benchmark database contains no direct measurement to confirm this in a head-to-head test.
Specification Differences
The two parts differ across nearly every specification field. The MI300 uses CDNA 3.0 architecture with the Aqua Vanjaram chip, while the RTX 4060 Ti uses Ada Lovelace with AD106. The MI300 has 153,000 million transistors compared to 22,900 million, and a die size of 1017 mm² versus 188 mm². Transistor density favors the MI300 at 150.4M per mm² against 121.8M per mm².
Clocks show the RTX 4060 Ti running higher: 2310 MHz base and 2535 MHz boost versus 1000 MHz and 1700 MHz for the MI300. Memory clock is also higher on the RTX 4060 Ti at 2250 MHz (18 Gbps effective) versus 1300 MHz (5.2 Gbps effective). Memory capacity and bandwidth heavily favor the MI300: 128 GB of HBM3 on an 8192-bit bus with 5.32 TB/s, versus 16 GB of GDDR6 on a 128-bit bus with 288.0 GB/s.
Compute resources diverge completely. The MI300 has 14080 shading units and 880 TMUs, but zero ROPs. The RTX 4060 Ti has 4352 shading units, 136 TMUs, and 48 ROPs, plus 34 ray tracing cores and 136 tensor cores. The MI300 lists no ray tracing or tensor core counts. Pixel rate is 0 MPixel/s for the MI300 and 121.7 GPixel/s for the RTX 4060 Ti. Texture rate is 1,496.0 GTexel/s versus 344.8 GTexel/s. FP32 and FP16 both run at 47.87 TFLOPS for the MI300 and 22.06 TFLOPS for the RTX 4060 Ti.
Power and connectivity differ as well. The MI300 has a TDP of 600 W with 2x 8-pin power connectors and a suggested PSU of 1000 W. The RTX 4060 Ti has a TDP of 165 W with 1x 16-pin connector and a suggested PSU of 450 W. The MI300 uses PCIe 5.0 x16, while the RTX 4060 Ti uses PCIe 4.0 x8. The MI300 has no display outputs, while the RTX 4060 Ti has 1x HDMI 2.1 and 3x DisplayPort 1.4a. The MI300 lists no graphics API support, while the RTX 4060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. Dimensions show the MI300 at 267 mm long and 111 mm tall, while the RTX 4060 Ti is 240 mm long, 111 mm tall, and 40 mm wide. The RTX 4060 Ti is dual-slot; the MI300 has no listed slot width. Release dates differ: the MI300 launched January 3, 2023, and the RTX 4060 Ti launched May 17, 2023. The RTX 4060 Ti has a production status of end-of-life and a launch MSRP of 499 USD. The MI300 has no launch MSRP listed.
FAQ
Q: Which card has higher raw FP32 compute?
A: The AMD Instinct MI300 delivers 47.87 TFLOPS FP32, more than double the NVIDIA GeForce RTX 4060 Ti 16 GB's 22.06 TFLOPS.
Q: How do the memory configurations compare?
A: The MI300 has 128 GB of HBM3 on an 8192-bit bus with 5.32 TB/s bandwidth. The RTX 4060 Ti has 16 GB of GDDR6 on a 128-bit bus with 288.0 GB/s.
Q: What is the RTX 4060 Ti 16 GB's benchmark score relative to its nearest rivals?
A: Its 3DMark Steel Nomad DX12 score is 2907, which is 0.1 percent behind the RTX PRO 4000 Blackwell SFF (2910), 0.2 percent behind the RTX 4060 Ti 8 GB (2913), 0.5 percent ahead of the RTX 4010 (2893), and 0.5 percent behind the Quadro P600 (2923).
Q: Does the MI300 support graphics APIs?
A: No. The MI300 lists DirectX as N/A, OpenGL as N/A, and Vulkan as N/A, and it has no display outputs.
Q: What are the power requirements for each part?
A: The MI300 has a 600 W TDP with 2x 8-pin connectors and a suggested PSU of 1000 W. The RTX 4060 Ti has a 165 W TDP with 1x 16-pin connector and a suggested PSU of 450 W.
Q: Which part has more shading units?
A: The MI300 has 14080 shading units, while the RTX 4060 Ti has 4352 shading units.
The Verdict
The data makes the intended use cases clear. The AMD Instinct MI300 is a compute accelerator with enormous memory capacity, extreme bandwidth, and high FP32 throughput, but it lacks any graphics output, API support, or rasterization capability. Its 128 GB HBM3 pool at 5.32 TB/s and 47.87 TFLOPS FP32 position it for memory-bound and compute-heavy workloads that do not require display output. The absence of benchmark scores in the database reflects its target workload, not a deficiency.
The NVIDIA GeForce RTX 4060 Ti 16 GB is a conventional graphics card with a recorded 3DMark Steel Nomad DX12 score of 2907, placing it in the 18th percentile. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, has 48 ROPs, 34 ray tracing cores, and 136 tensor cores, and runs at significantly higher clocks (2535 MHz boost). Its 16 GB GDDR6 memory at 288.0 GB/s is modest compared to the MI300, but it is paired with display outputs and a dual-slot design.
Who should pick which depends entirely on workload. For any graphics, gaming, or ray tracing task, the RTX 4060 Ti 16 GB is the only viable option, as the MI300 cannot output video or run graphics APIs. For massive data-parallel compute with extreme memory capacity and bandwidth, the MI300's specifications dwarf the RTX 4060 Ti, though no direct benchmark confirms this. The 600 W TDP and 1000 W suggested PSU indicate a data-center-class installation, while the RTX 4060 Ti's 165 W TDP and 450 W suggested PSU fit a desktop. The RTX 4060 Ti is marked end-of-life, while the MI300 has no production status listed. The database's 50th percentile ranking for the MI300 with zero average score, against the RTX 4060 Ti's 18th percentile with a 2907 score, shows the two parts are measured on entirely different scales.