AMD FirePro W7000 vs NVIDIA GeForce GTX 1060 6 GB Comparison

AMD
RADEON

AMD FirePro W7000

CORE STATE Pitcairn
VRAM 4 GB
CLOCK SPEED —
TDP 150 W
BUS WIDTH 256 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2012
VS
NVIDIA
GEFORCE

GeForce GTX 1060 6 GB

CORE STATE GP106
VRAM 6 GB
CLOCK SPEED 1709 MHz
TDP 120 W
BUS WIDTH 192 bit
ARCHITECTURE Pascal
nm
PROCESS 16 nm
LAUNCH DATE 2016

PERFORMANCE BENCHMARKS

geekbench_opencl
17,808
32,322
geekbench_vulkan
22,001
18,659
geekbench_metal
N/A
14,587

Analysis: AMD FirePro W7000 vs NVIDIA GeForce GTX 1060 6 GB

The data shows a clear split between these two end-of-life workstation and consumer GPUs: the NVIDIA GeForce GTX 1060 6 GB dominates in raw compute and OpenCL performance, while the AMD FirePro W7000 counters with a surprising Vulkan win. The GTX 1060 holds a higher average benchmark score (21856 vs 19905) and a slightly better percentile ranking (67th vs 65th), but the FirePro’s victory in one modern API test prevents a total sweep.

Head-to-Head Benchmarks

The single most decisive result is in Geekbench OpenCL, where the NVIDIA GeForce GTX 1060 6 GB scores 32322 against the AMD FirePro W7000’s 17808. That is an 81.5% advantage for the GTX 1060, a massive margin that reflects the generational gulf between the two architectures. In practical terms, this means the GTX 1060 delivers nearly twice the raw compute throughput in OpenCL workloads, which is the dominant API for many professional rendering and compute tasks.

The AMD FirePro W7000 takes the Geekbench Vulkan test with a score of 22001, beating the GTX 1060’s 18659 by 15.2%. This is a notable upset because the GTX 1060 is the newer product with a more modern feature set, yet the FirePro’s GCN 1.0 architecture manages to outperform it in this specific API. The deltaPct of -15.2% (from the GTX 1060’s perspective) shows that the AMD card is not just barely ahead—it is substantially faster in Vulkan.

With each card winning one head-to-head benchmark, the overall picture is one of specialization. The GTX 1060’s win is far larger in magnitude (81.5% vs 15.2%), suggesting that its compute advantage is the more significant differentiator. The FirePro’s Vulkan win, while real, comes in a test where the GTX 1060 still posts a respectable score. The average benchmark scores reinforce this: the GTX 1060 sits at 21856, which is 9.8% higher than the FirePro’s 19905. The GTX 1060 also ranks closer to its nearest rivals, with the NVIDIA Quadro RTX 5000 at 21629 (just 1% lower) and the AMD Radeon RX 5700 at 22170 (1.4% higher). The FirePro’s closest rival, the NVIDIA Tesla K40m, sits at 19885, only 0.1% behind, indicating that the W7000 is right at the edge of its performance class.

Architecture Differences

The two cards come from different manufacturing generations and design philosophies. The NVIDIA GeForce GTX 1060 6 GB uses the GP106 chip built on TSMC’s 16 nm process, packing 4,400 million transistors into a 200 mm² die. The transistor density is 22.0M per mm², a figure that reflects the more advanced lithography. The AMD FirePro W7000, by contrast, uses the Pitcairn chip on TSMC’s 28 nm process, with 2,800 million transistors spread across a slightly larger 212 mm² die. Its transistor density is just 13.2M per mm².

The shading unit count is identical at 1280, and both have 80 texture mapping units, but the similarities end there. The GTX 1060 has 48 ROPs versus the FirePro’s 32, giving the NVIDIA card a 50% advantage in pixel throughput. The pixel rate figures confirm this: 82.03 GPixel/s for the GTX 1060 against 30.40 GPixel/s for the FirePro. The texture rates also diverge sharply, with the GTX 1060 delivering 136.7 GTexel/s versus 76.00 GTexel/s for the AMD card.

The memory subsystems are fundamentally different. The GTX 1060 uses 6 GB of GDDR5 on a 192-bit bus, achieving 192.2 GB/s of bandwidth. The FirePro W7000 has 4 GB of GDDR5 on a wider 256-bit bus, but its memory clock is lower (1200 MHz vs 2002 MHz), resulting in 153.6 GB/s of bandwidth. The GTX 1060’s bandwidth advantage is 25.1%, which matters for texture-heavy workloads. The FirePro’s wider bus does not compensate for its older, slower memory.

Clock speeds are another major divider. The GTX 1060 runs at a base clock of 1506 MHz with a boost of 1709 MHz, while the FirePro W7000’s base and boost clocks are not specified in the data. This clock advantage, combined with the newer architecture, drives the FP32 compute gap: 4.375 TFLOPS for the GTX 1060 versus 2.432 TFLOPS for the FirePro. The GTX 1060 also has a defined FP16 rate of 68.36 GFLOPS (1:64), while the FirePro has no FP16 specification listed.

Where Each One Wins

The NVIDIA GeForce GTX 1060 6 GB wins in any workload that stresses raw compute, pixel fill, or texture throughput. Its 81.5% OpenCL advantage makes it the clear choice for OpenCL-based rendering, simulation, or data processing tasks. The higher pixel rate (82.03 GPixel/s) and texture rate (136.7 GTexel/s) mean it will handle high-resolution framebuffers and complex shader work far more efficiently. The 6 GB memory capacity and higher bandwidth (192.2 GB/s) also give it more headroom for large datasets or high-resolution textures compared to the FirePro’s 4 GB and 153.6 GB/s.

The AMD FirePro W7000 wins in Vulkan-based workloads, where its 22001 score beats the GTX 1060’s 18659 by 15.2%. This makes it the better option for applications that rely heavily on the Vulkan API, which is increasingly common in modern game engines and some professional visualization tools. The FirePro’s four DisplayPort 1.2 outputs also give it a multi-monitor advantage over the GTX 1060’s mixed output set (1x DVI, 1x HDMI 2.0, 3x DisplayPort 1.4a), though the GTX 1060’s DisplayPort 1.4a supports higher bandwidth per connection.

For power efficiency, the GTX 1060 is the clear winner. Its 120 W TDP is 20% lower than the FirePro’s 150 W, yet it delivers 79.9% higher FP32 compute. The GTX 1060 also requires a 300 W suggested PSU versus 450 W for the FirePro, making it easier to integrate into existing systems. The GTX 1060 is a dual-slot card, while the FirePro is single-slot, so the AMD card has an advantage in dense multi-GPU configurations.

Specification Differences

The table below highlights only the fields where the two cards differ, excluding identical specifications.

| Specification | NVIDIA GeForce GTX 1060 6 GB | AMD FirePro W7000 |

|---|---|---|

| Architecture | Pascal | GCN 1.0 |

| Process Node | 16 nm | 28 nm |

| Transistors | 4,400 million | 2,800 million |

| Die Size | 200 mm² | 212 mm² |

| Transistor Density | 22.0M / mm² | 13.2M / mm² |

| Memory Size | 6 GB | 4 GB |

| Memory Bus Width | 192 bit | 256 bit |

| Memory Clock | 2002 MHz (8 Gbps effective) | 1200 MHz (4.8 Gbps effective) |

| Memory Bandwidth | 192.2 GB/s | 153.6 GB/s |

| ROPs | 48 | 32 |

| Pixel Rate | 82.03 GPixel/s | 30.40 GPixel/s |

| Texture Rate | 136.7 GTexel/s | 76.00 GTexel/s |

| FP32 Compute | 4.375 TFLOPS | 2.432 TFLOPS |

| FP16 Compute | 68.36 GFLOPS (1:64) | Not specified |

| TDP | 120 W | 150 W |

| Slot Width | Dual-slot | Single-slot |

| Suggested PSU | 300 W | 450 W |

| Display Outputs | 1x DVI, 1x HDMI 2.0, 3x DisplayPort 1.4a | 4x DisplayPort 1.2 |

| DirectX Support | 12 (12_1) | 12 (11_1) |

| Vulkan Support | 1.4 | 1.2.170 |

| Launch MSRP | 299 USD | 899 USD |

| Release Date | 2016-07-18 | 2012-06-12 |

| Predecessor | GeForce 900 | FirePro Terascale |

| Successor | GeForce 20 | Radeon Pro Polaris |

FAQ

Q: Which card has a higher average benchmark score?

A: The NVIDIA GeForce GTX 1060 6 GB scores 21856 on average, which is 9.8% higher than the AMD FirePro W7000’s 19905.

Q: Is the GTX 1060 faster in OpenCL?

A: Yes, significantly. The GTX 1060 scores 32322 in Geekbench OpenCL versus 17808 for the FirePro W7000, an 81.5% advantage.

Q: Does the FirePro W7000 win any benchmark?

A: Yes, it wins the Geekbench Vulkan test with a score of 22001, beating the GTX 1060’s 18659 by 15.2%.

Q: How do the memory bandwidth figures compare?

A: The GTX 1060 has 192.2 GB/s of bandwidth from its 192-bit bus, while the FirePro W7000 has 153.6 GB/s from a wider 256-bit bus but slower memory clocks.

Q: Which card has a higher transistor density?

A: The GTX 1060 has a density of 22.0M transistors per mm², compared to 13.2M for the FirePro W7000, reflecting its more advanced 16 nm process.

Q: What is the TDP difference?

A: The GTX 1060 has a 120 W TDP, which is 30 W lower than the FirePro W7000’s 150 W TDP.

The Verdict

The data points to the NVIDIA GeForce GTX 1060 6 GB as the superior overall performer for most use cases. Its 81.5% lead in OpenCL, higher FP32 compute (4.375 TFLOPS vs 2.432 TFLOPS), and better pixel and texture rates make it the stronger choice for compute-heavy professional workloads. The 25.1% bandwidth advantage and 50% more memory (6 GB vs 4 GB) further cement its position for large datasets. The lower TDP (120 W vs 150 W) and lower suggested PSU requirement (300 W vs 450 W) make it more efficient and easier to deploy.

The AMD FirePro W7000 is the pick only if Vulkan performance is the primary criterion, as its 15.2% win in that specific benchmark demonstrates. Its single-slot design and four DisplayPort outputs also make it attractive for multi-monitor setups in a compact chassis, and its wider 256-bit memory bus is a point in its favor for certain access patterns. However, the FirePro’s 28 nm process, lower transistor density, and lack of FP16 support show its age.

The GTX 1060’s launch MSRP of 299 USD is also significantly lower than the FirePro’s 899 USD, though both are end-of-life products. Given the GTX 1060’s wins in compute, memory, power, and efficiency, the verdict is clear: choose the GTX 1060 for anything beyond Vulkan-specific workloads. The FirePro W7000 remains relevant only as a specialized Vulkan performer or a multi-display workstation card where its slot width and output count are decisive.

DETAILED SPECIFICATIONS

SPECIFICATION
FirePro W7000
GTX 1060 6 GB
Core Specs
Shading Units
1,280
1,280 0.0%
Shaders
1,280
1,280 0.0%
TMUs
80
80 0.0%
ROPs
32
48 +50.0%
Compute Units
20
—
SM Count
—
10
Clocks
Base Clock
—
1506 MHz
Boost Clock
—
1709 MHz
GPU Clock
950 MHz
—
Memory Clock
1200 MHz 4.8 Gbps effective
2002 MHz 8 Gbps effective
Memory
Memory Size
4 GB
6 GB
VRAM (MB)
4,096
6,144 +50.0%
Memory Type
GDDR5
GDDR5
Memory Bus
256 bit
192 bit
Bandwidth
153.6 GB/s
192.2 GB/s
Cache
L1 Cache
16 KB (per CU)
48 KB (per SM)
L2 Cache
512 KB
1536 KB
Performance
Pixel Rate
30.40 GPixel/s
82.03 GPixel/s
Texture Rate
76.00 GTexel/s
136.7 GTexel/s
FP32 (TFLOPS)
2.432 TFLOPS
4.375 TFLOPS
FP64 (TFLOPS)
152.0 GFLOPS (1:16)
136.7 GFLOPS (1:32)
FP16 (TFLOPS)
—
68.36 GFLOPS (1:64)
Power
TDP
150 W
120 W
TDP (W)
150
120 -20.0%
Suggested PSU
450 W
300 W
Power Connectors
1x 6-pin
1x 6-pin
Architecture
Architecture
GCN 1.0
Pascal
GPU Name
Pitcairn
GP106
Generation
FirePro GCN (Wx000)
GeForce 10
Process Size
28 nm
16 nm
Transistors
2,800 million
4,400 million
Die Size
212 mm²
200 mm²
Foundry
TSMC
TSMC
Density
13.2M / mm²
22.0M / mm²
API Support
DirectX
12 (11_1)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
3.0
CUDA
—
6.1
Shader Model
6.5 (5.1)
6.8
Physical
Slot Width
Single-slot
Dual-slot
Length
242 mm 9.5 inches
250 mm 9.8 inches
Height
111 mm 4.4 inches
111 mm 4.4 inches
Outputs
4x DisplayPort 1.2
1x DVI1x HDMI 2.03x DisplayPort 1.4a
Bus Interface
PCIe 3.0 x16
PCIe 3.0 x16
Other
Launch Price
899 USD
299 USD
Production
End-of-life
End-of-life
Predecessor
FirePro Terascale
GeForce 900
Successor
Radeon Pro Polaris
GeForce 20
View FirePro W7000 Details View GeForce GTX 1060 6 GB Details