AMD FirePro W4190M vs AMD Radeon RX 9060 XT 16 GB Comparison

AMD
RADEON

AMD FirePro W4190M

CORE STATE Opal
VRAM 2 GB
CLOCK SPEED 900 MHz
TDP —
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2015
VS
AMD
RADEON

Radeon RX 9060 XT 16 GB

CORE STATE Navi 44
VRAM 16 GB
CLOCK SPEED 3130 MHz
TDP 160 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
4,505
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,093
passmark_directx_10
N/A
116
passmark_directx_11
N/A
185
passmark_directx_12
N/A
57
passmark_directx_9
N/A
305
passmark_g2d
N/A
1,169
passmark_g3d
N/A
20,099
passmark_gpu_compute
N/A
11,234

Analysis: AMD FirePro W4190M vs AMD Radeon RX 9060 XT 16 GB

The AMD Radeon RX 9060 XT 16 GB and the AMD FirePro W4190M occupy opposite ends of the hardware spectrum, separated by a decade of architectural evolution and market positioning. The RX 9060 XT is an active, high-performance desktop component built on RDNA 4.0, while the FirePro W4190M is an end-of-life mobile workstation GPU built on GCN 1.0. Their benchmark data shows a massive performance gulf, but the comparison is meaningful for understanding how far mobile and entry-level desktop graphics have come.

Head-to-Head Benchmarks

Direct head-to-head benchmark results are unavailable, but the aggregate data paints a stark picture. The RX 9060 XT 16 GB holds an average benchmark score of 4657, while the FirePro W4190M scores 4505. That raw difference of 152 points (3.4%) is deceptive, because the two are measured on entirely different benchmark suites. The RX 9060 XT was tested across a broad range of DirectX and compute workloads, while the FirePro W4190M has only a single Geekbench OpenCL score.

Looking at the RX 9060 XT’s individual results, its PassMark G3D score of 20099 dwarfs the FirePro’s lone data point. The RX 9060 XT also delivers 11234 in PassMark GPU compute and 1169 in PassMark G2D, none of which the FirePro has corresponding results for. The FirePro’s Geekbench OpenCL score of 4505 is roughly comparable to the RX 9060 XT’s average, but this is likely due to the differences in workload intensity—OpenCL compute on a 2015 mobile chip cannot be equated to modern DirectX 12 gaming performance.

The nearest rivals for each card further highlight the positioning. The RX 9060 XT’s nearest neighbors are the AMD Radeon R5 M320 (0% delta), NVIDIA Quadro P400 (-0.6%), NVIDIA GeForce GTX 970M (0.6%), and NVIDIA Quadro M3000M (0.8%). This places the RX 9060 XT in a strange spot—its average score is within 1% of several legacy mobile and entry-level desktop parts, despite its modern architecture. The FirePro W4190M’s nearest rivals are the AMD Radeon R7 M260 (0.1% delta), Intel HD Graphics P530 (-1.2%), AMD Radeon RX 560 (-1.4%), and AMD Radeon R5 M230 (-1.6%). The RX 560 being a rival at -1.4% suggests the FirePro is competitive with a much newer entry-level desktop card in OpenCL, but that is a narrow slice of performance.

In terms of raw throughput, the RX 9060 XT delivers 25.64 TFLOPS FP32, whereas the FirePro W4190M manages 691.2 GFLOPS. That is a 37x difference in raw compute. The pixel rate tells a similar story: 200.3 GPixel/s versus 7.2 GPixel/s. Texture rate is 400.6 GTexel/s versus 21.6 GTexel/s. These are not close numbers; they reflect fundamentally different hardware generations.

Architecture Differences

The architectural gap is enormous. The RX 9060 XT uses the Navi 44 chip on the RDNA 4.0 architecture, fabricated on TSMC’s 4 nm process. It packs 29,700 million transistors into a 199 mm² die, yielding a transistor density of 149.2M per mm². The FirePro W4190M uses the Opal chip on GCN 1.0 architecture, built on TSMC’s 28 nm process. It contains 950 million transistors on a 77 mm² die, with a density of just 12.3M per mm². That is a 31x transistor count difference and a 12x density difference.

The RX 9060 XT features 2048 shading units, 128 texture mapping units, 64 ROPs, and 32 ray tracing cores. The FirePro W4190M has 384 shading units, 24 TMUs, and 8 ROPs, with no ray tracing support. The RX 9060 XT also supports RDNA 4.0’s feature set, including DirectX 12 Ultimate (12_2), Vulkan 1.4, and OpenGL 4.6. The FirePro W4190M supports DirectX 12 (11_1), Vulkan 1.2.170, and OpenGL 4.6. The absence of ray tracing cores on the FirePro is a fundamental feature gap.

Clock speeds are another major divider. The RX 9060 XT has a base clock of 1700 MHz, a boost clock of 3130 MHz, and a game clock of 2530 MHz. The FirePro W4190M runs at a base of 825 MHz and a boost of 900 MHz. Memory configurations differ: the RX 9060 XT uses 16 GB of GDDR6 on a 128-bit bus at 2518 MHz (20.1 Gbps effective), yielding 322.3 GB/s bandwidth. The FirePro uses 2 GB of GDDR5 on a 128-bit bus at 1000 MHz (4 Gbps effective), yielding 64 GB/s. The RX 9060 XT also has a 1x 8-pin power connector and a 160 W TDP, while the FirePro is an MXM module with no power connector listed.

FAQ

Q: Which card has better raw compute performance?

A: The RX 9060 XT 16 GB delivers 25.64 TFLOPS FP32, while the FirePro W4190M manages 691.2 GFLOPS FP32. The RX 9060 XT is roughly 37x faster in raw floating-point throughput.

Q: Are these cards comparable in any benchmark?

A: Their average scores are close (4657 vs 4505), but they were tested on different suites. The RX 9060 XT has scores across PassMark and 3DMark, while the FirePro has only a Geekbench OpenCL result. The FirePro’s nearest rival, the AMD Radeon RX 560, sits at a -1.4% delta, suggesting it holds up in OpenCL compute but not in modern gaming workloads.

Q: What is the memory capacity and bandwidth difference?

A: The RX 9060 XT has 16 GB of GDDR6 with 322.3 GB/s bandwidth. The FirePro W4190M has 2 GB of GDDR5 with 64 GB/s bandwidth. The RX 9060 XT has 8x the capacity and 5x the bandwidth.

Q: Does the FirePro W4190M support ray tracing?

A: No. The FirePro W4190M has no ray tracing cores. The RX 9060 XT has 32 dedicated ray tracing cores and supports DirectX 12 Ultimate (12_2), which includes ray tracing features.

Q: Which card is more power efficient?

A: The data shows the RX 9060 XT has a TDP of 160 W, while the FirePro W4190M has no listed TDP. The RX 9060 XT achieves its performance on a 4 nm process, whereas the FirePro uses 28 nm, so efficiency differences are implied by process node and performance metrics.

Q: Are either of these cards still in production?

A: The RX 9060 XT is listed as Active production status. The FirePro W4190M is End-of-life. The RX 9060 XT was released on 2025-06-03, while the FirePro was released on 2015-11-11.

Specification Differences

The core specifications differ across every major category. The RX 9060 XT uses a 4 nm process, while the FirePro uses 28 nm. Transistor count is 29,700 million versus 950 million. Die size is 199 mm² versus 77 mm². The RX 9060 XT has a base clock of 1700 MHz and boost of 3130 MHz, versus 825 MHz and 900 MHz. Memory size is 16 GB GDDR6 versus 2 GB GDDR5. Bandwidth is 322.3 GB/s versus 64 GB/s. Shading units are 2048 versus 384. TMUs are 128 versus 24. ROPs are 64 versus 8. The RX 9060 XT has 32 ray tracing cores; the FirePro has none.

Pixel rate is 200.3 GPixel/s versus 7.2 GPixel/s. Texture rate is 400.6 GTexel/s versus 21.6 GTexel/s. FP32 compute is 25.64 TFLOPS versus 691.2 GFLOPS. The RX 9060 XT has a TDP of 160 W and uses a 1x 8-pin connector, while the FirePro is an MXM module with no power connector. The bus interface is PCIe 5.0 x16 versus PCIe 3.0 x8. Display outputs are 1x HDMI 2.1b and 2x DisplayPort 2.1a for the RX 9060 XT, versus portable device dependent for the FirePro. DirectX support is 12 Ultimate (12_2) versus 12 (11_1). Vulkan support is 1.4 versus 1.2.170. The RX 9060 XT has a launch MSRP of 349 USD; the FirePro has no listed launch MSRP.

Where Each One Wins

The RX 9060 XT 16 GB wins in every measurable category of raw performance. It is faster in pixel fill rate, texture fill rate, FP32 compute, memory bandwidth, and memory capacity. It also offers modern features like ray tracing, DirectX 12 Ultimate, PCIe 5.0, and DisplayPort 2.1a outputs. For gaming, content creation, or any GPU-accelerated workload that relies on current APIs, the RX 9060 XT is the clear choice. Its 27th percentile ranking among all GPUs, while modest, reflects a card that sits near the middle of the pack, outperforming many legacy parts but not competing with high-end modern GPUs.

The FirePro W4190M wins in portability and integration. As an MXM module with no power connector, it is designed for laptop or compact mobile workstations where the RX 9060 XT’s dual-slot, 160 W, 1x 8-pin design cannot fit. It also carries a smaller 77 mm² die, which is more space-efficient in constrained environments. Its 26th percentile ranking is nearly identical to the RX 9060 XT’s 27th, but that ranking is based on a single Geekbench OpenCL score, so it should not be interpreted as comparable overall performance.

In practical terms, the FirePro W4190M wins in legacy compatibility scenarios. It supports OpenGL 4.6, which matches the RX 9060 XT, and its GCN 1.0 architecture has broad driver support for older professional applications. It also has a lower 64 GB/s bandwidth requirement, which can be an advantage in power-constrained systems. However, for any workload that pushes the GPU beyond basic compute, the RX 9060 XT’s 16 GB of GDDR6 and 322.3 GB/s bandwidth provide a decisive edge in texture-heavy scenes and large datasets.

The benchmark data shows the RX 9060 XT is the superior performer in absolute terms, but the FirePro W4190M occupies a niche that the RX 9060 XT cannot serve: a low-power, mobile form factor with no external power requirement. For users with portable workstations from the mid-2010s, the FirePro remains a functional option. For anyone building or upgrading a desktop system in 2025, the RX 9060 XT offers a modern feature set and performance that the FirePro cannot approach.

DETAILED SPECIFICATIONS

SPECIFICATION
FirePro W4190M
RX 9060 XT 16 GB
Core Specs
Shading Units
384
2,048 +433.3%
Shaders
384
2,048 +433.3%
TMUs
24
128 +433.3%
ROPs
8
64 +700.0%
Compute Units
6
32 +433.3%
Clocks
Base Clock
825 MHz
1700 MHz
Boost Clock
900 MHz
3130 MHz
Game Clock
—
2530 MHz
Memory Clock
1000 MHz 4 Gbps effective
2518 MHz 20.1 Gbps effective
Memory
Memory Size
2 GB
16 GB
VRAM (MB)
2,048
16,384 +700.0%
Memory Type
GDDR5
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
64.00 GB/s
322.3 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
256 KB
4 MB
L3 Cache
—
32 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
7.200 GPixel/s
200.3 GPixel/s
Texture Rate
21.60 GTexel/s
400.6 GTexel/s
FP32 (TFLOPS)
691.2 GFLOPS
25.64 TFLOPS
FP64 (TFLOPS)
43.20 GFLOPS (1:16)
801.3 GFLOPS (1:32)
FP16 (TFLOPS)
—
25.64 TFLOPS (1:1)
AI/RT
RT Cores
—
32
Matrix Cores
—
64
Power
TDP
—
160 W
TDP (W)
—
160
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
GCN 1.0
RDNA 4.0
GPU Name
Opal
Navi 44
Codename
—
Strix Point
Generation
FirePro Mobile (Wx100M)
Navi IV (RX 9000)
Process Size
28 nm
4 nm
Transistors
950 million
29,700 million
Die Size
77 mm²
199 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
149.2M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
2.2
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
MXM Module
Dual-slot
Outputs
Portable Device Dependent
1x HDMI 2.1b2x DisplayPort 2.1a
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x16
Other
Launch Price
—
349 USD
Production
End-of-life
Active
Predecessor
FirePro Mobility
Navi III
Successor
Radeon Pro Mobile
—
View FirePro W4190M Details View Radeon RX 9060 XT 16 GB Details