AMD FirePro W2100 vs AMD Radeon RX 9060 XT 8 GB Comparison

AMD
RADEON

AMD FirePro W2100

CORE STATE Oland
VRAM 2 GB
CLOCK SPEED 680 MHz
TDP 26 W
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2014
VS
AMD
RADEON

Radeon RX 9060 XT 8 GB

CORE STATE Navi 44
VRAM 8 GB
CLOCK SPEED 3130 MHz
TDP 150 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 4.0
nm
PROCESS 4 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
4,093
N/A
geekbench_vulkan
4,497
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,093

Analysis: AMD FirePro W2100 vs AMD Radeon RX 9060 XT 8 GB

# Head-to-Head Benchmarks

The benchmark data presents a peculiar comparison. The AMD FirePro W2100, a 2014-era workstation card built on GCN 1.0 architecture, posts an average benchmark score of 4295. The AMD Radeon RX 9060 XT 8 GB, a 2025 release on RDNA 4.0, counters with an average score of 4093. That places the older card approximately 4.9% ahead in average benchmark score — a narrow margin that contradicts what the architectural differences might suggest.

Looking at individual tests, the FirePro W2100 records a Geekbench OpenCL score of 4093 and a Geekbench Vulkan score of 4497. The RX 9060 XT has a single recorded 3DMark Steel Nomad DX12 score of 4093. When comparing the two directly on OpenCL versus DX12 workloads, they land on identical numerical scores of 4093, though these tests measure different APIs and rendering paths. The RX 9060 XT's Vulkan score is not directly reported in the same benchmark suite, so cross-test comparisons remain limited.

The percentile rankings tell a similar story. The FirePro W2100 sits at the 25th percentile against all GPUs, while the RX 9060 XT sits just below at the 24th percentile. Both cards occupy nearly the same position in the overall performance distribution, despite the eleven-year gap in release dates and the complete overhaul in architecture. The FirePro W2100's nearest rivals include the NVIDIA GeForce GTX 460M (average score 4282, deltaPct 0.3), AMD Radeon Vega 3 (4268, deltaPct 0.6), NVIDIA GeForce RTX 4070 GDDR6 (4335, deltaPct -0.9), and NVIDIA Quadro K3000M (4241, deltaPct 1.3). The RX 9060 XT's nearest rivals are Intel HD Graphics 630 (4075, deltaPct 0.4), NVIDIA Quadro K2100M (4151, deltaPct -1.4), NVIDIA GeForce GT 755M (4033, deltaPct 1.5), and AMD Radeon R5 M330 (4170, deltaPct -1.8).

Notably, the RX 9060 XT trails its nearest rival, the Radeon R5 M330, by 1.8%, while the FirePro W2100 leads its closest competitor, the GeForce GTX 460M, by only 0.3%. The FirePro W2100 also sits within 0.9% of the GeForce RTX 4070 GDDR6 — a modern high-end card — which underscores how benchmark scores in this range cluster tightly regardless of generation.

# Where Each One Wins

The FirePro W2100 wins on raw average benchmark score, posting 4295 versus 4093 for the RX 9060 XT. This advantage of roughly 4.9% appears consistent across its two recorded tests: the OpenCL score of 4093 and the Vulkan score of 4497 both exceed the RX 9060 XT's single DX12 result of 4093. For applications that leverage OpenCL compute or Vulkan rendering, the FirePro W2100 demonstrates a measurable lead in the data.

The RX 9060 XT wins on architectural modernity and platform features. It supports DirectX 12 Ultimate (12_2) compared to the FirePro W2100's DirectX 12 (11_1), and it exposes Vulkan 1.4 versus 1.2.170. The RX 9060 XT also carries 32 dedicated ray tracing cores, a feature entirely absent from the FirePro W2100. For workloads that rely on DX12 Ultimate features — mesh shaders, variable rate shading, or ray-traced effects — the RX 9060 XT is the only card in this comparison that can execute them at all.

The FirePro W2100 wins on power efficiency in absolute terms, drawing 26 W TDP versus 150 W for the RX 9060 XT. It also requires no external power connectors and only a 200 W suggested PSU, while the RX 9060 XT needs a single 8-pin connector and a 450 W suggested PSU. For legacy workstation environments with limited power delivery, the FirePro W2100 is the drop-in option.

The RX 9060 XT wins decisively on memory bandwidth and capacity. It offers 8 GB of GDDR6 across a 128-bit bus, delivering 322.3 GB/s. The FirePro W2100 provides 2 GB of DDR3 on the same 128-bit bus, yielding only 28.80 GB/s. That is an 11.2x bandwidth advantage for the RX 9060 XT, which directly impacts texture-heavy workloads, large framebuffers, and compute tasks that stream data through memory.

# Architecture Differences

The two cards represent opposite ends of AMD's architectural timeline. The FirePro W2100 uses the Oland chip built on GCN 1.0, manufactured on a 28 nm TSMC process. It contains 950 million transistors on a 77 mm² die, yielding a transistor density of 12.3 million per square millimeter. The RX 9060 XT uses the Navi 44 chip on RDNA 4.0, built on a 4 nm TSMC process. It packs 29,700 million transistors into a 199 mm² die, achieving 149.2 million transistors per square millimeter — a 12.1x density improvement.

The compute resources differ by an order of magnitude. The FirePro W2100 has 320 shading units, 20 texture mapping units, and 8 raster output units. The RX 9060 XT has 2048 shading units, 128 TMUs, and 64 ROPs — 6.4x, 6.4x, and 8x more respectively. The RX 9060 XT also adds 32 ray tracing cores, which have no equivalent in the GCN 1.0 design. Peak FP32 throughput scales from 435.2 GFLOPS on the FirePro W2100 to 25.64 TFLOPS on the RX 9060 XT, a 58.9x increase. The RX 9060 XT also delivers FP16 at the same 25.64 TFLOPS rate (1:1 ratio), while the FirePro W2100 reports no FP16 capability.

Clock speeds tell a similar story. The FirePro W2100 runs at a 630 MHz base and 680 MHz boost, with memory at 900 MHz (1800 Mbps effective). The RX 9060 XT runs at 1700 MHz base, 2530 MHz game clock, and 3130 MHz boost, with memory at 2518 MHz (20.1 Gbps effective). Pixel rate jumps from 5.440 GPixel/s to 200.3 GPixel/s, and texture rate from 13.60 GTexel/s to 400.6 GTexel/s.

The memory subsystems reflect their eras. The FirePro W2100 uses DDR3 with 2 GB capacity, while the RX 9060 XT uses GDDR6 with 8 GB. Both use a 128-bit bus, but the effective bandwidth difference is massive. The bus interface also advances from PCIe 3.0 x8 on the FirePro W2100 to PCIe 5.0 x16 on the RX 9060 XT. Display outputs move from 2x DisplayPort 1.2 to 1x HDMI 2.1b and 2x DisplayPort 2.1a. The FirePro W2100 is single-slot with no power connectors; the RX 9060 XT is dual-slot with a single 8-pin connector. The FirePro W2100 is end-of-life, while the RX 9060 XT remains active in production.

# The Verdict

The data presents a counterintuitive picture. The FirePro W2100 holds a higher average benchmark score (4295 versus 4093) and a better percentile rank (25th versus 24th). But that lead is marginal — roughly 4.9% — and it comes from older, less demanding benchmark workloads. The Geekbench OpenCL and Vulkan tests that the FirePro W2100 excels at do not exercise the RX 9060 XT's modern feature set, including ray tracing, DX12 Ultimate pipelines, or its massive memory bandwidth advantage.

For users running legacy OpenCL or Vulkan workloads on older software stacks, the FirePro W2100's benchmark scores suggest it remains serviceable. Its 26 W power draw and lack of external power connectors make it suitable for low-power or legacy systems. Its 2 GB DDR3 memory and 28.80 GB/s bandwidth, however, will bottleneck any memory-intensive task.

For anyone building a new system or running modern DX12 workloads, the RX 9060 XT is the only rational choice. Its 8 GB GDDR6 memory, 322.3 GB/s bandwidth, 32 ray tracing cores, and 25.64 TFLOPS FP32 throughput dwarf the FirePro W2100's capabilities. The 3DMark Steel Nomad DX12 score of 4093, while numerically equal to the FirePro W2100's OpenCL score, represents a far more demanding modern workload. The RX 9060 XT's launch MSRP is 299 USD, which the FirePro W2100 lacks entirely — the older card was never priced in the same bracket.

The benchmark data alone does not favor one card overwhelmingly. The FirePro W2100 wins on raw average score; the RX 9060 XT wins on every architectural metric that matters for current software. The verdict depends entirely on the workload: legacy compute favors the FirePro W2100, modern rendering favors the RX 9060 XT.

# FAQ

Q: Which card has a higher average benchmark score?

A: The AMD FirePro W2100 has an average benchmark score of 4295, while the AMD Radeon RX 9060 XT 8 GB has an average score of 4093. The FirePro W2100 leads by approximately 4.9%.

Q: Does the RX 9060 XT support ray tracing?

A: Yes. The RX 9060 XT includes 32 dedicated ray tracing cores, a feature entirely absent from the FirePro W2100, which has no RT cores listed.

Q: How do the memory bandwidth figures compare?

A: The FirePro W2100 provides 28.80 GB/s of bandwidth from 2 GB of DDR3 on a 128-bit bus. The RX 9060 XT delivers 322.3 GB/s from 8 GB of GDDR6 on the same 128-bit bus width — an 11.2x advantage.

Q: What is the power consumption difference?

A: The FirePro W2100 has a TDP of 26 W and requires no power connectors, with a suggested PSU of 200 W. The RX 9060 XT has a TDP of 150 W, requires one 8-pin connector, and suggests a 450 W PSU.

Q: Which card supports newer DirectX features?

A: The RX 9060 XT supports DirectX 12 Ultimate (12_2), while the FirePro W2100 supports DirectX 12 (11_1). The RX 9060 XT also supports Vulkan 1.4 versus Vulkan 1.2.170 on the FirePro W2100.

Q: How do the nearest rivals compare for each card?

A: The FirePro W2100's closest rival is the NVIDIA GeForce GTX 460M at 4282 (deltaPct 0.3), followed by the AMD Radeon Vega 3 at 4268 (deltaPct 0.6). The RX 9060 XT's closest rival is the Intel HD Graphics 630 at 4075 (deltaPct 0.4), with the NVIDIA Quadro K2100M at 4151 (deltaPct -1.4) trailing it.

DETAILED SPECIFICATIONS

SPECIFICATION
FirePro W2100
RX 9060 XT 8 GB
Core Specs
Shading Units
320
2,048 +540.0%
Shaders
320
2,048 +540.0%
TMUs
20
128 +540.0%
ROPs
8
64 +700.0%
Compute Units
5
32 +540.0%
Clocks
Base Clock
630 MHz
1700 MHz
Boost Clock
680 MHz
3130 MHz
Game Clock
—
2530 MHz
Memory Clock
900 MHz 1800 Mbps effective
2518 MHz 20.1 Gbps effective
Memory
Memory Size
2 GB
8 GB
VRAM (MB)
2,048
8,192 +300.0%
Memory Type
DDR3
GDDR6
Memory Bus
128 bit
128 bit
Bandwidth
28.80 GB/s
322.3 GB/s
Cache
L1 Cache
16 KB (per CU)
—
L2 Cache
256 KB
4 MB
L3 Cache
—
32 MB
L0 Cache
—
32 KB per WGP
Performance
Pixel Rate
5.440 GPixel/s
200.3 GPixel/s
Texture Rate
13.60 GTexel/s
400.6 GTexel/s
FP32 (TFLOPS)
435.2 GFLOPS
25.64 TFLOPS
FP64 (TFLOPS)
27.20 GFLOPS (1:16)
801.3 GFLOPS (1:32)
FP16 (TFLOPS)
—
25.64 TFLOPS (1:1)
AI/RT
RT Cores
—
32
Matrix Cores
—
64
Power
TDP
26 W
150 W
TDP (W)
26
150 +476.9%
Suggested PSU
200 W
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
GCN 1.0
RDNA 4.0
GPU Name
Oland
Navi 44
Codename
—
Strix Point
Generation
FirePro GCN (Wx100)
Navi IV (RX 9000)
Process Size
28 nm
4 nm
Transistors
950 million
29,700 million
Die Size
77 mm²
199 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
149.2M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
2.2
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
168 mm 6.6 inches
—
Height
69 mm 2.7 inches
—
Outputs
2x DisplayPort 1.2
1x HDMI 2.1b2x DisplayPort 2.1a
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x16
Other
Launch Price
—
299 USD
Production
End-of-life
Active
Predecessor
FirePro Terascale
Navi III
Successor
Radeon Pro Polaris
—
View FirePro W2100 Details View Radeon RX 9060 XT 8 GB Details