AMD FirePro W2100 vs AMD Radeon RX 9060 XT 16 GB Comparison
AMD FirePro W2100
Radeon RX 9060 XT 16 GB
PERFORMANCE BENCHMARKS
Analysis: AMD FirePro W2100 vs AMD Radeon RX 9060 XT 16 GB
The AMD Radeon RX 9060 XT 16 GB and the AMD FirePro W2100 represent two entirely different eras of GPU design, with the former being an active, high-performance consumer card and the latter an end-of-life, low-power workstation product. The data shows that the RX 9060 XT is in a completely different performance class, but the FirePro W2100 has distinct characteristics that may suit specific legacy or low-power use cases. This analysis will compare their benchmark scores, specifications, and architectural differences to determine which card is appropriate for which scenario.
FAQ
Q: How do the average benchmark scores of the two cards compare?
A: The AMD Radeon RX 9060 XT 16 GB has an average benchmark score of 4657, while the AMD FirePro W2100 scores 4295. This puts the RX 9060 XT ahead by roughly 8.4% in average score, though this figure is heavily skewed by the different benchmark suites used for each card.
Q: What is the performance percentile ranking for each GPU?
A: The RX 9060 XT sits at the 27th percentile of all GPUs, while the FirePro W2100 is at the 25th percentile. Despite the massive specifications gap, both cards are positioned near the lower end of the global performance distribution, but for very different reasons.
Q: Which card has more memory, and what type is it?
A: The RX 9060 XT features 16 GB of GDDR6 memory on a 128-bit bus, delivering 322.3 GB/s of bandwidth. The FirePro W2100 has only 2 GB of DDR3 memory on the same 128-bit bus width, yielding just 28.80 GB/s of bandwidth.
Q: Are there any notable differences in power requirements?
A: Yes, the RX 9060 XT has a TDP of 160 W and requires a 450 W power supply with a single 8-pin connector. The FirePro W2100 is a 26 W card with no power connectors and a suggested PSU of only 200 W, making it far more power-efficient.
Q: What are the nearest rivals for each card based on average score?
A: For the RX 9060 XT, the nearest rival is the AMD Radeon R5 M320 with a 0% delta, followed by the NVIDIA Quadro P400 at -0.6% and the NVIDIA GeForce GTX 970M at +0.6%. For the FirePro W2100, the NVIDIA GeForce GTX 460M is the closest at +0.3%, with the AMD Radeon Vega 3 at +0.6% and the NVIDIA Quadro K3000M at +1.3%.
Q: Which card supports newer graphics APIs?
A: The RX 9060 XT supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The FirePro W2100 supports DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170, meaning the RX 9060 XT has access to more modern API features.
The Verdict
The verdict is unambiguous for nearly all users: the AMD Radeon RX 9060 XT 16 GB is the superior card in every meaningful performance metric. Its FP32 compute of 25.64 TFLOPS dwarfs the FirePro W2100's 435.2 GFLOPS, a difference of nearly 59 times. The RX 9060 XT also has significantly more memory (16 GB vs 2 GB), higher bandwidth (322.3 GB/s vs 28.80 GB/s), and a much newer architecture. The FirePro W2100's only advantages are its drastically lower power draw (26 W vs 160 W), smaller physical footprint (single-slot vs dual-slot), and lack of external power connectors.
For anyone building a system for modern gaming, content creation, or any GPU-accelerated workload, the RX 9060 XT is the only logical choice. The FirePro W2100 is strictly for legacy workstation environments where low power consumption, a small form factor, and basic display output are the primary requirements, and where modern performance is not expected. The data shows the RX 9060 XT is also the better option for future-proofing, given its active production status and support for DirectX 12 Ultimate, while the FirePro W2100 is end-of-life with older API support.
Head-to-Head Benchmarks
Direct head-to-head benchmark comparisons are not available in the data, but the individual benchmark suites reveal the performance gap. The RX 9060 XT scores 20099 in Passmark G3D, 11234 in Passmark GPU Compute, and 1169 in Passmark G2D. It also achieves 4093 in 3DMark Steel Nomad DX12. The FirePro W2100 scores 4093 in Geekbench OpenCL and 4497 in Geekbench Vulkan.
The Passmark scores for the RX 9060 XT show a card that can handle modern DirectX workloads, with the G3D score of 20099 being particularly strong. The FirePro W2100's Geekbench scores, while not directly comparable to Passmark, indicate a much lower level of compute capability. The RX 9060 XT's nearest rival, the AMD Radeon R5 M320, has an identical average score of 4657 with a 0% delta, placing it in the same performance tier despite the R5 M320 being a much older mobile part. The FirePro W2100's closest rival, the NVIDIA GeForce GTX 460M, is only 0.3% faster, showing that it competes with mobile GPUs from 2010-2011 era.
The head-to-head data shows zero wins for each card in direct comparisons, as no such benchmarks exist. The performance difference is so vast that any direct comparison would be meaningless; the RX 9060 XT's texture rate of 400.6 GTexel/s versus the FirePro W2100's 13.60 GTexel/s is a 29-fold difference, and the pixel rate of 200.3 GPixel/s versus 5.440 GPixel/s is a 37-fold difference.
Specification Differences
The specification gap between these two cards is immense. The RX 9060 XT uses a 4 nm process node with 29,700 million transistors on a 199 mm² die, while the FirePro W2100 uses a 28 nm node with 950 million transistors on a 77 mm² die. Clock speeds differ dramatically: the RX 9060 XT has a base clock of 1700 MHz and a boost clock of 3130 MHz, while the FirePro W2100 runs at 630 MHz base and 680 MHz boost.
Memory specifications are also vastly different. The RX 9060 XT has 16 GB of GDDR6 at 2518 MHz (20.1 Gbps effective), while the FirePro W2100 has 2 GB of DDR3 at 900 MHz (1800 Mbps effective). The RX 9060 XT has 2048 shading units, 128 TMUs, and 64 ROPs, compared to the FirePro W2100's 320 shading units, 20 TMUs, and 8 ROPs. The RX 9060 XT also has 32 ray tracing cores, while the FirePro W2100 has none. The RX 9060 XT uses a PCIe 5.0 x16 interface, while the FirePro W2100 uses PCIe 3.0 x8. Display outputs differ as well: the RX 9060 XT has 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the FirePro W2100 has 2x DisplayPort 1.2.
Architecture Differences
The architectural gap is equally stark. The RX 9060 XT is built on RDNA 4.0 architecture with the Navi 44 chip, codenamed Strix Point, and belongs to the Navi IV (RX 9000) generation. The FirePro W2100 uses GCN 1.0 architecture with the Oland chip, part of the FirePro GCN (Wx100) generation. The RX 9060 XT's transistor density is 149.2M per mm², while the FirePro W2100's is just 12.3M per mm², reflecting the massive process node advantage.
The RX 9060 XT supports DirectX 12 Ultimate (12_2), which includes features like hardware ray tracing and mesh shaders, while the FirePro W2100 only supports DirectX 12 (11_1). Both support OpenGL 4.6, but the RX 9060 XT's Vulkan 1.4 support is newer than the FirePro W2100's Vulkan 1.2.170. The RX 9060 XT has FP16 capability at 25.64 TFLOPS (1:1 ratio), while the FirePro W2100 has no listed FP16 performance. The RX 9060 XT's predecessor is Navi III, and it was released on 2025-06-03, while the FirePro W2100's predecessor is FirePro Terascale, and its successor is Radeon Pro Polaris, with a release date of 2014-08-11.
Where Each One Wins
The RX 9060 XT wins in every scenario that requires performance. Its 25.64 TFLOPS FP32 compute and 200.3 GPixel/s pixel rate make it suitable for modern gaming, 3D rendering, video editing, and compute workloads. The 16 GB of GDDR6 memory with 322.3 GB/s bandwidth is sufficient for large textures and datasets. The 32 ray tracing cores enable hardware-accelerated ray tracing, a feature completely absent on the FirePro W2100. The 3130 MHz boost clock and 2048 shading units provide ample processing power for any contemporary application.
The FirePro W2100 wins in scenarios where power consumption and physical size are the primary constraints. Its 26 W TDP means it can be powered entirely by the PCIe slot with no external connectors, and its single-slot design at 168 mm length and 69 mm height fits into compact chassis. The 2 GB of DDR3 memory is sufficient for basic 2D desktop workloads and legacy professional applications that do not require significant GPU resources. Its 28.80 GB/s bandwidth, while low by modern standards, is adequate for driving two DisplayPort 1.2 outputs for basic productivity tasks. The FirePro W2100's end-of-life status and 2014 release date mean it is best suited for maintaining older systems rather than new builds. For any user choosing between these two, the RX 9060 XT is the clear winner unless the absolute minimum power draw and footprint are non-negotiable requirements.