AMD FirePro S10000 vs NVIDIA GeForce GTX 1060 5 GB Comparison
AMD FirePro S10000
GeForce GTX 1060 5 GB
PERFORMANCE BENCHMARKS
Analysis: AMD FirePro S10000 vs NVIDIA GeForce GTX 1060 5 GB
Head-to-Head Benchmarks
The benchmark data for the NVIDIA GeForce GTX 1060 5 GB and the AMD FirePro S10000 splits exactly one win apiece across the two recorded tests, but the magnitude of those wins is very different. The decisive margin comes in the Geekbench OpenCL test, where the GTX 1060 5 GB scores 33,397 against the FirePro S10000's 30,631. That is a 9% advantage for the NVIDIA card, a substantial gap in a compute-oriented workload that favors raw throughput. The FirePro S10000 does strike back in the Geekbench Vulkan test, scoring 34,145 versus 33,991 for the GTX 1060 5 GB, but the margin there is razor-thin — only 0.5%. In practical terms, that Vulkan result is effectively a statistical tie, whereas the OpenCL result shows a clear, measurable lead for the GTX 1060 5 GB.
Looking at the broader context, the GTX 1060 5 GB's average benchmark score of 33,694 places it in the 78th percentile of all GPUs, while the FirePro S10000's average of 32,388 sits at the 77th percentile. The difference in average score is 1,306 points, which translates to roughly a 4% overall advantage for the NVIDIA part. The nearest-rival data reinforces this positioning. The GTX 1060 5 GB sits within 0.9% of the AMD Radeon RX 480 (which scores 33,997) and within 0.8% of the AMD Radeon HD 7950 (33,951). It is essentially neck-and-neck with the NVIDIA RTX A5000 (33,622, a 0.2% delta) and trails the AMD Radeon RX 7700S (33,849) by only 0.5%. The FirePro S10000, meanwhile, is bracketed by the AMD Radeon RX 7900 GRE (32,456, a -0.2% delta) and the AMD FirePro S9300 X2 (32,540, -0.5%), with the AMD Radeon Pro 570X (32,176) sitting 0.7% behind it. These percentile and rival positions tell a consistent story: the GTX 1060 5 GB is the stronger overall performer, but the FirePro S10000 is not far off, and in Vulkan specifically it holds a slight edge.
FAQ
Q: Which GPU wins the OpenCL benchmark, and by how much?
A: The NVIDIA GeForce GTX 1060 5 GB wins the Geekbench OpenCL test with a score of 33,397 against the AMD FirePro S10000's 30,631, a 9% advantage.
Q: Does the AMD FirePro S10000 win any benchmark?
A: Yes, it wins the Geekbench Vulkan test with a score of 34,145 compared to the GTX 1060 5 GB's 33,991, though the margin is only 0.5%.
Q: How do the two cards compare in overall average benchmark score?
A: The GTX 1060 5 GB has an average benchmark score of 33,694, while the FirePro S10000 averages 32,388. This puts the NVIDIA card in the 78th percentile of all GPUs and the AMD card in the 77th percentile.
Q: What are the closest rivals to the GTX 1060 5 GB?
A: The closest rivals are the NVIDIA RTX A5000 (33,622, 0.2% delta), the AMD Radeon RX 7700S (33,849, -0.5% delta), the AMD Radeon HD 7950 (33,951, -0.8% delta), and the AMD Radeon RX 480 (33,997, -0.9% delta).
Q: What is the closest competitor to the FirePro S10000?
A: The AMD Radeon RX 7900 GRE is the closest, scoring 32,456 with a -0.2% delta. The AMD FirePro S9300 X2 (32,540, -0.5%) and AMD Radeon Pro 570X (32,176, 0.7%) are also nearby.
Q: Is the Vulkan result meaningful for choosing between these cards?
A: The 0.5% delta in Vulkan is within the noise of typical benchmark variance. The OpenCL 9% delta is the more significant differentiator, favoring the GTX 1060 5 GB.
The Verdict
The data points to a clear but not overwhelming recommendation. The NVIDIA GeForce GTX 1060 5 GB is the better overall card, with a higher average benchmark score (33,694 vs 32,388), a higher percentile ranking (78th vs 77th), and a decisive 9% win in OpenCL. The AMD FirePro S10000's only benchmark win is a 0.5% edge in Vulkan, which is too small to outweigh the NVIDIA card's advantages elsewhere. For users prioritizing compute performance in OpenCL workloads, the GTX 1060 5 GB is the obvious pick. For those specifically targeting Vulkan-based applications, the FirePro S10000 offers a marginal edge, but the difference is unlikely to be perceptible in real-world use. The GTX 1060 5 GB also has the benefit of a much more recent release date (December 2017 versus November 2012 for the FirePro S10000), though the data alone shows both are end-of-life products. A buyer choosing purely on benchmark results should gravitate toward the GTX 1060 5 GB, as it delivers a higher average score and a more substantial win in the heavier-weight compute test.
Specification Differences
The memory subsystems of these two cards are fundamentally different. The GTX 1060 5 GB uses 5 GB of GDDR5 on a 160-bit bus, yielding 160.2 GB/s of bandwidth. The FirePro S10000 has 3 GB of GDDR5 on a much wider 384-bit bus, producing 240.0 GB/s of bandwidth — a 50% advantage in raw memory throughput. Clock speeds also diverge significantly. The GTX 1060 5 GB runs at a base of 1506 MHz and boosts to 1709 MHz, while the FirePro S10000 sits at 825 MHz base and 950 MHz boost. The NVIDIA card's memory runs at 2002 MHz (8 Gbps effective), whereas the AMD card's memory is clocked at 1250 MHz (5 Gbps effective). Power demands are starkly different: the GTX 1060 5 GB has a 120 W TDP and requires a single 6-pin power connector, while the FirePro S10000 draws 375 W and needs two 8-pin connectors. The recommended power supply is 300 W for the NVIDIA card versus 750 W for the AMD card. Physical dimensions differ too — the GTX 1060 5 GB is 250 mm (9.8 inches) long, while the FirePro S10000 extends to 305 mm (12 inches) and adds a height specification of 111 mm (4.4 inches). Both are dual-slot cards with PCIe 3.0 x16 interfaces. Display outputs are another point of contrast: the GTX 1060 5 GB offers 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a, while the FirePro S10000 has 1x DVI and 4x mini-DisplayPort 1.2.
Architecture Differences
The two GPUs come from different architectural generations and process nodes. The GTX 1060 5 GB is built on NVIDIA's Pascal architecture, fabricated on a 16 nm process at TSMC. Its GP106 chip contains 4,400 million transistors on a 200 mm² die, yielding a transistor density of 22.0 million per mm². The FirePro S10000 uses AMD's GCN 1.0 architecture, built on a 28 nm process, also at TSMC. Its Tahiti chip packs 4,313 million transistors onto a 352 mm² die, for a density of 12.3 million per mm². The smaller, denser Pascal die gives the GTX 1060 5 GB a clear manufacturing advantage. The compute configuration also differs. The GTX 1060 5 GB has 1,280 shading units, 80 texture mapping units, and 40 ROPs. The FirePro S10000 has more shading units (1,792) and more TMUs (112), but fewer ROPs (32). These counts translate into very different pixel and texture rates. The GTX 1060 5 GB achieves 68.36 GPixel/s pixel fill rate and 136.7 GTexel/s texture rate. The FirePro S10000 manages only 30.40 GPixel/s and 106.4 GTexel/s. In floating-point compute, the GTX 1060 5 GB delivers 4.375 TFLOPS FP32, while the FirePro S10000 delivers 3.405 TFLOPS. The NVIDIA card also supports FP16 at 68.36 GFLOPS (1:64 ratio), whereas the AMD card has no FP16 specification listed. On the API front, the GTX 1060 5 GB supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The FirePro S10000 supports DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. Neither card has ray tracing or tensor cores.
Where Each One Wins
The GTX 1060 5 GB wins in OpenCL compute, delivering 9% higher performance than the FirePro S10000. This makes it the better choice for workloads that rely on OpenCL acceleration, such as certain scientific simulations, image processing, or cryptocurrency mining. Its higher FP32 throughput (4.375 TFLOPS vs 3.405 TFLOPS), higher pixel rate (68.36 GPixel/s vs 30.40 GPixel/s), and higher texture rate (136.7 GTexel/s vs 106.4 GTexel/s) all support this advantage. The NVIDIA card also has a lower TDP (120 W vs 375 W), which means it can be deployed in systems with a 300 W power supply rather than a 750 W unit, and it takes up less physical space. The FirePro S10000's wins are narrower but real. It edges out the GTX 1060 5 GB in Vulkan by 0.5%, which could matter for applications built specifically on that API. Its memory bandwidth is substantially higher (240.0 GB/s vs 160.2 GB/s), which can benefit memory-bound workloads even if the compute cores are slower. The wider 384-bit bus and 3 GB of VRAM may also be preferable for certain large datasets that fit within that capacity. However, the GTX 1060 5 GB has more total VRAM (5 GB vs 3 GB), which is often the limiting factor in modern workloads. The FirePro S10000's higher shading unit count (1,792 vs 1,280) and TMU count (112 vs 80) do not translate into benchmark wins, suggesting that its lower clock speeds (825 MHz base vs 1506 MHz) hold it back. For most users, the GTX 1060 5 GB is the more balanced performer, with a clear lead in the heavier compute test and a negligible deficit in the lighter one. The FirePro S10000 is only preferable in niche Vulkan-specific scenarios or where raw memory bandwidth outweighs compute throughput.