AMD FirePro M5100 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison
AMD FirePro M5100
RTX PRO 5000 72 GB Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD FirePro M5100 vs NVIDIA RTX PRO 5000 72 GB Blackwell
The AMD FirePro M5100 and the NVIDIA RTX PRO 5000 72 GB Blackwell represent two extremes of the GPU spectrum, separated by twelve years of architectural evolution. The data paints a clear picture of generational progress, but also reveals surprising quirks in how benchmark scores are aggregated.
Head-to-Head Benchmarks
The benchmark data offers a fragmented comparison. The AMD FirePro M5100 has a single recorded score in Geekbench OpenCL, achieving 6,830 points. This places it in the 38th percentile of all GPUs, with its nearest rival being the AMD Radeon R7 M370 at 6,764 points (a 1% delta) and the NVIDIA GeForce GT 1010 at 6,698 points (a 2% delta). The FirePro M5100 also edges out the NVIDIA GeForce GTX 675M by 1.7% and the AMD Radeon R5 M240 by 2.1% in this specific test.
The NVIDIA RTX PRO 5000's score profile is entirely different. Its PassMark G3D score of 24,310 is its most impressive result, while its PassMark GPU Compute score reaches 15,667. However, the RTX PRO 5000's average benchmark score across all tests is just 6,407, which is lower than the FirePro M5100's single-score average of 6,830. This counterintuitive situation stems from the RTX PRO 5000's inclusion of legacy DirectX tests where it scores surprisingly low — 175 in DirectX 10, 219 in DirectX 11, 78 in DirectX 12, and 311 in DirectX 9. These low legacy scores drag down its average, placing it in the 37th percentile, with nearest rivals like the NVIDIA GeForce GTX 460 SE and GTX 580M both at 6,389 (0.3% delta) and the AMD Radeon Vega 10 Mobile at 6,476 (a 1.1% delta against the RTX card).
The data suggests a paradox. In modern compute workloads, the RTX PRO 5000's 66.94 TFLOPS of FP32 performance versus the FirePro M5100's 992.0 GFLOPS indicates a massive performance gulf. The RTX PRO 5000's 3DMark Steel Nomad DX12 score of 9,579.5 further demonstrates its dominance in contemporary rendering. Yet the averaging methodology creates a misleading overall comparison, where the 2013 mobile chip appears statistically competitive with a 2025 workstation behemoth. The real story is that the RTX PRO 5000's PassMark G3D score alone is roughly 3.5 times higher than the FirePro's entire OpenCL score, revealing the true scale of performance difference in modern workloads.
Architecture Differences
The architectural gap between these two GPUs is vast. The AMD FirePro M5100 uses the Venus chip based on GCN 1.0 architecture, manufactured on a 28 nm process at TSMC. It contains 1,500 million transistors on a 123 mm² die, yielding a transistor density of 12.2M per mm². Its memory subsystem consists of 2 GB of GDDR5 on a 128-bit bus, providing 72.00 GB/s of bandwidth. The GPU has 640 shading units, 40 texture mapping units, and 16 raster output pipelines, delivering 12.40 GPixel/s pixel rate and 31.00 GTexel/s texture rate.
The NVIDIA RTX PRO 5000 employs the GB202 chip based on Blackwell 2.0 architecture, also built by TSMC but on a 5 nm process. This chip packs 92,200 million transistors on a 750 mm² die, with a transistor density of 122.9M per mm² — roughly ten times denser than the FirePro. Its memory configuration is drastically different: 72 GB of GDDR7 on a 384-bit bus, providing 1.34 TB/s of bandwidth. The RTX PRO 5000 contains 14,080 shading units, 440 TMUs, 160 ROPs, 110 ray tracing cores, and 440 tensor cores. Its pixel rate reaches 380.3 GPixel/s and texture rate hits 1,045.9 GTexel/s.
Clock speeds also reflect the generational leap. The FirePro M5100 runs at 725 MHz base and 775 MHz boost, while the RTX PRO 5000 operates at 1,740 MHz base and 2,377 MHz boost. Memory clocks differ similarly: 1,125 MHz (4.5 Gbps effective) versus 1,750 MHz (28 Gbps effective). The RTX PRO 5000 supports FP16 at 66.94 TFLOPS (1:1 ratio), a feature entirely absent from the FirePro M5100's specifications. API support also diverges, with the FirePro offering DirectX 12 (11_1) and Vulkan 1.2.170, while the RTX PRO 5000 provides DirectX 12 Ultimate (12_2) and Vulkan 1.4.
FAQ
Q: Why does the RTX PRO 5000 have a lower average benchmark score than the FirePro M5100 despite being vastly more powerful?
A: The RTX PRO 5000's average of 6,407 includes legacy DirectX tests where it scores extremely low (78 in DirectX 12, 175 in DirectX 10). The FirePro M5100's average of 6,830 comes from a single Geekbench OpenCL score of 6,830. The averaging methodology penalizes the modern card for its poor legacy API performance.
Q: How do the memory bandwidth figures compare between the two GPUs?
A: The RTX PRO 5000's 1.34 TB/s bandwidth is dramatically higher than the FirePro M5100's 72.00 GB/s. This represents a roughly 18.6x difference in memory throughput, reflecting the 384-bit bus and GDDR7 technology versus the 128-bit bus and GDDR5.
Q: What is the transistor density difference and what does it imply?
A: The RTX PRO 5000 has a transistor density of 122.9M per mm², while the FirePro M5100 has 12.2M per mm². This tenfold density advantage on the 5 nm process versus 28 nm enables the RTX card to pack 92,200 million transistors versus 1,500 million on the FirePro.
Q: Are there any benchmark tests where the FirePro M5100 outperforms the RTX PRO 5000?
A: Yes, in the Geekbench OpenCL test, the FirePro M5100 scores 6,830, which is higher than the RTX PRO 5000's average of 6,407. However, the RTX PRO 5000's individual scores like PassMark G3D at 24,310 and GPU Compute at 15,667 far exceed the FirePro's result.
Q: What are the thermal and power characteristics of each GPU?
A: The RTX PRO 5000 has a TDP of 300 W and requires a 700 W suggested PSU, with a 1x 16-pin power connector. The FirePro M5100 has no TDP listed in the data and uses an MXM module form factor with no separate power connector specified.
Q: Which GPU supports ray tracing and tensor cores?
A: Only the RTX PRO 5000 includes dedicated hardware for these features, with 110 ray tracing cores and 440 tensor cores. The FirePro M5100 from the GCN 1.0 era has no such specialized units.
Specification Differences
The two GPUs differ across nearly every specification category. The process node shifts from 28 nm to 5 nm, and transistor count jumps from 1,500 million to 92,200 million. Die size expands from 123 mm² to 750 mm². Memory capacity goes from 2 GB GDDR5 to 72 GB GDDR7, with bus width increasing from 128-bit to 384-bit. Bandwidth rises from 72.00 GB/s to 1.34 TB/s.
Core configurations show massive scaling: shading units grow from 640 to 14,080, TMUs from 40 to 440, and ROPs from 16 to 160. The RTX PRO 5000 adds 110 RT cores and 440 tensor cores, features absent from the FirePro. Clock speeds increase from 725/775 MHz to 1,740/2,377 MHz. Pixel rate jumps from 12.40 to 380.3 GPixel/s, and texture rate from 31.00 to 1,045.9 GTexel/s. FP32 performance scales from 992.0 GFLOPS to 66.94 TFLOPS, with FP16 support only on the newer card.
The form factor changes from MXM Module with MXM-A (3.0) interface to a Dual-slot card with PCIe 5.0 x16. The RTX PRO 5000 uses a 1x 16-pin power connector and suggests a 700 W PSU, while the FirePro lists no power connector or PSU requirement. Display outputs differ from "Portable Device Dependent" to 4x DisplayPort 2.1b. The RTX PRO 5000 has physical dimensions of 267 mm length, 111 mm height, and 40 mm width, while the FirePro has no dimensions listed. Production status moves from End-of-life to Active, with release dates of 2013-10-15 and 2025-10-20 respectively.
Where Each One Wins
The AMD FirePro M5100 wins in the Geekbench OpenCL benchmark, scoring 6,830 points. This suggests it retains some relevance in specific OpenCL compute workloads, particularly those optimized for GCN architecture. Its MXM form factor also makes it suitable for portable workstation applications, though its end-of-life status limits current usability.
The NVIDIA RTX PRO 5000 dominates in virtually every other measurable category. Its PassMark G3D score of 24,310 demonstrates overwhelming superiority in 3D graphics performance. The GPU Compute score of 15,667 indicates strong compute capability for modern workloads. The 3DMark Steel Nomad DX12 score of 9,579.5 shows excellent DirectX 12 performance. Its 66.94 TFLOPS FP32 and FP16 performance enables heavy computational tasks, while the 72 GB GDDR7 memory with 1.34 TB/s bandwidth supports massive datasets. The inclusion of RT and tensor cores makes it suitable for ray-traced rendering and AI workloads, capabilities the FirePro completely lacks. The RTX PRO 5000's active production status, PCIe 5.0 interface, and four DisplayPort 2.1b outputs position it for modern workstation integration.
The Verdict
The data directs different buyers to each card. The AMD FirePro M5100 is a product of its 2013 era, suitable only for legacy systems or specific OpenCL workloads where its 6,830 score proves competitive. Its end-of-life status and 2 GB memory limit severely restrict modern use cases. The RTX PRO 5000 is the clear choice for any current or future workstation build requiring maximum performance. Its 24,310 PassMark G3D score, 66.94 TFLOPS compute, and 72 GB memory capacity make it the decisive winner for professionals working with large datasets, real-time rendering, or AI applications. The 300 W TDP and 700 W PSU requirement are reasonable trade-offs for the performance envelope. The RTX PRO 5000's 37th percentile ranking, while dragged down by legacy API tests, does not reflect its actual capability in contemporary software. For anyone choosing between these two, the RTX PRO 5000 is the only rational option for new deployments. The FirePro M5100's only advantage lies in its lower score in the single Geekbench OpenCL test, which is insufficient to recommend it for any serious workload. The specification gap is so vast that the comparison almost seems unfair — the RTX PRO 5000's transistor count alone is over 61 times higher than the FirePro's, encapsulating over a decade of semiconductor progress in a single chip.