Intel Arc Pro A60

The Intel Arc Pro A60 is a workstation graphics card built on the Xe-HPG architecture, utilizing the DG2-256 chip manufactured on a 6 nm process by TSMC. This database entry shows an average benchmark score of 60,326, which places it in the 89th percentile of all GPUs tested, indicating a strong position within the broader hardware landscape. The card's performance data is derived from two specific tests: a Geekbench OpenCL score of 63,485 and a Geekbench Vulkan score of 57,166, with the average being the primary reference point for its competitive standing.

Benchmark Performance

The Arc Pro A60's average score of 60,326 points establishes a clear performance tier when set against its nearest rivals. The data shows a remarkably tight cluster of results, with the A60 sitting nearly dead center among its direct competitors. Against the AMD Radeon Pro Vega 48, which posts an average score of 61,081, the Arc Pro A60 trails by a mere 1.2%, a margin so small it falls within typical run-to-run variance for most workloads. Similarly, the AMD Radeon Pro W5700X scores 61,207, placing the A60 just 1.4% behind that card, which again indicates near-parity in raw compute throughput.

The most striking comparison comes from the NVIDIA GeForce RTX 5080, a card that averages 59,188 points. Here, the Arc Pro A60 holds a 1.9% advantage, meaning the Intel workstation card edges out this NVIDIA competitor in the aggregate benchmark data. This is a notable result, as it demonstrates that the A60 can hold its own against a much newer-generation part in these specific compute tests. The final rival, the AMD Radeon RX 6850M XT, scores 61,492, and the A60 sits 1.9% behind that mobile-oriented part. Across all four comparisons, the performance deltas range from -1.9% to +1.9%, which indicates a performance envelope that is tightly packed with these rivals, with no single card holding a decisive lead.

Breaking down the individual benchmark results provides further insight. The OpenCL score of 63,485 is higher than the Vulkan score of 57,166, a gap of roughly 11%. This suggests the card's compute performance is somewhat API-dependent, with OpenCL workloads extracting more throughput from the hardware. The average score of 60,326 sits between these two figures, serving as a balanced representation of the card's capabilities across different software interfaces. For context, the 89th percentile ranking means the A60 outperforms the vast majority of all GPUs in the database, though it does not crack the top tier dominated by flagship parts.

How It Compares

AMD Radeon Pro Vega 48: The Arc Pro A60 is effectively a statistical tie with this AMD workstation card, trailing by just 1.2% in average score. In practical terms, the data shows no consistent winner between the two, and users would likely see identical performance in most professional applications. The A60 offers a modern architecture with hardware ray tracing support, which the Vega 48 lacks, but raw compute throughput is essentially equivalent.

AMD Radeon Pro W5700X: With a 1.4% deficit against the W5700X, the Arc Pro A60 again demonstrates near-identical performance. The W5700X holds a slight edge in the aggregate data, but the margin is small enough that specific workloads could easily swing in favor of the Intel card. The A60's advantage lies in its newer feature set and API support, including Vulkan 1.4, which may offer better long-term driver optimization.

NVIDIA GeForce RTX 5080: This is the most surprising comparison, as the Arc Pro A60 leads the RTX 5080 by 1.9%. Despite the NVIDIA card likely being from a newer generation with different architectural priorities, the benchmark data shows the Intel part delivering higher average compute scores. This does not necessarily translate to gaming or ray tracing performance, but for pure compute benchmarks, the A60 comes out ahead.

AMD Radeon RX 6850M XT: The Arc Pro A60 trails this AMD mobile GPU by 1.9%, the largest deficit among the rivals. The RX 6850M XT is a high-end laptop part, and its score of 61,492 indicates it can match or slightly exceed desktop workstation cards in this test. The A60 remains competitive, however, and the gap is small enough that driver maturity or specific software optimizations could close it entirely.

Power and Cooling

The Intel Arc Pro A60 carries a thermal design power (TDP) of 130 W, which is a moderate figure for a workstation GPU with this level of performance. This power draw is managed within a single-slot form factor, making the card suitable for dense multi-GPU configurations or compact workstation chassis where space is at a premium. The card does not list any specific power connector requirements in the data, but the suggested power supply unit rating is 300 W. This means a system with a 300 W PSU is considered sufficient to run the card under typical workloads, assuming the rest of the system does not demand excessive power.

The 130 W TDP aligns well with the card's performance tier, as the benchmark scores show it competing with cards that likely have similar or higher power draws. The single-slot design is a significant advantage for workstation builds, as it allows for better airflow and more expansion options compared to dual-slot alternatives. The cooling solution is not explicitly detailed in the data, but the power envelope suggests that a capable single-slot cooler is sufficient to maintain stable operation. The PCIe 4.0 x16 bus interface provides ample bandwidth for data transfer, and the card's power requirements are modest enough that most professional workstations with a 300 W or higher PSU can accommodate it without issue.

FAQ

Q: What is the average benchmark score of the Intel Arc Pro A60?

A: The average benchmark score is 60,326, calculated from the Geekbench OpenCL score of 63,485 and the Geekbench Vulkan score of 57,166.

Q: How does the Arc Pro A60 perform against the NVIDIA GeForce RTX 5080?

A: The Arc Pro A60 leads the RTX 5080 by 1.9% in average benchmark score, with the Intel card scoring 60,326 versus 59,188 for the NVIDIA card.

Q: What is the TDP of the Arc Pro A60 and what PSU is recommended?

A: The TDP is 130 W, and the suggested power supply is 300 W, which is sufficient for systems using this card.

Q: Does the Arc Pro A60 support hardware ray tracing?

A: Yes, the card includes 16 ray tracing cores, and it supports DirectX 12 Ultimate (12_2), which includes hardware-accelerated ray tracing features.

Q: What is the memory configuration of the Arc Pro A60?

A: The card features 12 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 384.0 GB/s.

Q: What display outputs are available on the Arc Pro A60?

A: The card has 4x DisplayPort 2.0 outputs, allowing for multiple high-resolution display connections.

Who Should Consider It

Based on the benchmark data, the Intel Arc Pro A60 is a strong candidate for users working at 1440p or lower resolutions in professional applications, where its compute performance is more than adequate. The 89th percentile ranking means it outperforms most GPUs in the database, and its near-parity with cards like the Radeon Pro Vega 48 and W5700X makes it a viable option for tasks such as 3D modeling, video editing, and CAD work. The 1.9% lead over the RTX 5080 in these specific benchmarks suggests that users prioritizing OpenCL or Vulkan compute workloads will find the A60 competitive, though those relying on NVIDIA-specific features like CUDA would need to look elsewhere.

For users targeting 4K resolution, the data indicates the A60 can handle such workloads, but it may not deliver the headroom required for very demanding real-time rendering. The card's 12 GB of VRAM is sufficient for many professional tasks, but users working with extremely large textures or multiple high-resolution displays should consider the memory capacity carefully. The single-slot design and 130 W TDP make it particularly appealing for multi-GPU systems, where power efficiency and physical space are critical factors. Gamers, however, should note that the benchmark scores are compute-oriented, and the card's performance in gaming-specific tests is not covered by this data, so its suitability for gaming remains unverified.

Memory Subsystem

The Arc Pro A60 is equipped with 12 GB of GDDR6 memory, which is a substantial amount for professional workloads but not excessive for the card's performance tier. The memory operates on a 192-bit bus interface, and the data shows a clock speed of 2000 MHz, which translates to an effective data rate of 16 Gbps. This configuration yields a memory bandwidth of 384.0 GB/s, a figure that balances capacity and throughput for the card's compute capabilities.

At high resolutions, such as 4K, the 384.0 GB/s bandwidth is adequate for most professional rendering tasks, though it may become a limiting factor in scenarios involving massive data sets or multi-display outputs. The 12 GB capacity is well-suited for large frame buffers and complex scenes, but users should be aware that some extreme workstation workloads may require more memory. The 192-bit bus is narrower than what is found on higher-end cards, but the 16 Gbps effective speed helps mitigate this, resulting in a bandwidth figure that supports the card's 8.397 TFLOPS of FP32 performance without creating a significant bottleneck. In comparison to the rivals, the A60's memory subsystem is competitive, with the bandwidth and capacity being sufficient to keep the GPU fed during compute-intensive operations. The pixel rate of 131.2 GPixel/s and texture rate of 262.4 GTexel/s further indicate that the memory subsystem is well-matched to the card's processing capabilities, ensuring that high-resolution output and texture-heavy scenes do not suffer from excessive stalling.