Downfall

The AMD Ryzen 5 5600G paired with the Intel Arc B570 delivers a highly playable experience in Downfall across most configurations, though the data reveals a clear performance ceiling at higher settings. The measured results show a system that scales predictably with resolution, but the relationship between settings and frame rate is more complex than a simple linear progression. This analysis breaks down the measured FPS data to explain where the bottleneck lies, how the CPU and GPU each contribute, and which settings offer the optimal balance.

Resolution Scaling

The FPS data from 1080p to 4K paints a clear picture of how the system handles increasing pixel counts. At 1080p with Low settings, the combo produces 163 FPS average. Moving to 1440p drops that to 116 FPS, a 29% reduction, while 4K sees a further drop to 72 FPS, which is a 38% reduction from the 1440p figure. This scaling pattern indicates that the GPU is the primary limiting factor as resolution increases, but the CPU still has headroom to push higher frame rates at lower resolutions.

At Medium settings, the scaling is even more revealing. The 1080p result of 133 FPS drops to 95 FPS at 1440p (a 29% decrease) and then to 59 FPS at 4K (a 38% decrease from 1440p). The consistency of these percentage drops across Low and Medium settings suggests a well-behaved rendering pipeline where the GPU workload scales linearly with pixel count. The 4K Medium result also includes measured minimum and maximum FPS of 50 and 68, respectively, indicating that while the average is 59 FPS, there is a 30% variance between the lowest and highest frames, pointing to occasional stutters during intense scenes.

High settings show a similar pattern but with lower absolute numbers. The 1080p High result of 109 FPS drops to 78 FPS at 1440p and further to 49 FPS at 4K. The 4K High result is notably below the 60 FPS threshold that many consider the baseline for smooth gameplay, suggesting that 4K High is not a viable option for this hardware. The Ultra preset tells a more definitive story: 68 FPS at 1080p, 49 FPS at 1440p, and only 30 FPS at 4K. The 4K Ultra result is barely playable, and the 1440p Ultra result is borderline.

The data suggests that the limiting component at higher resolutions is unambiguously the GPU. The Intel Arc B570’s memory bandwidth of 380.0 GB/s and 10 GB of GDDR6 memory are sufficient for 1080p and 1440p, but the 4K results show the card struggling to maintain frame rates above 60 FPS except at Low settings. Conversely, the CPU’s role is more pronounced at 1080p, where the frame rates exceed 100 FPS in most settings, indicating that the Ryzen 5 5600G can feed the GPU adequately without becoming a bottleneck at these lower resolutions.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. For a horror game like Downfall, which typically relies on single-threaded performance for game logic and physics, the CPU’s capabilities are sufficient. The processor’s benchmark scores reflect a solid mid-range performer: the Cinebench R23 single-core score is 1409, and the multi-core score is 10551. The Geekbench scores are 1801 single-core and 8428 multi-core.

In the context of the measured FPS data, the CPU role becomes clearer when examining the 1080p Low result of 163 FPS. This high frame rate suggests the CPU can process game logic well beyond 144 FPS, which is often the refresh rate ceiling for many monitors. The fact that 1080p Medium drops to 133 FPS and 1080p High drops to 109 FPS indicates that the GPU is starting to take over the workload as settings increase, but the CPU still has headroom. The 1080p Ultra result of 68 FPS shows a dramatic drop, which is more attributable to the GPU’s inability to handle the increased visual effects than any CPU limitation.

The 6-core, 12-thread configuration is well-suited for modern games, and the L3 cache of 16 MB helps with data locality. The processor’s memory bandwidth of 51.2 GB/s for DDR4 dual-channel memory is adequate for feeding the GPU without creating a bottleneck. Comparing to its nearest rivals, the Ryzen 5 5600G has an average benchmark score of 21088, which is essentially tied with the Intel Core i3-1220P (21066, 0.1% delta) and the Intel Core Ultra 7 256V (21112, -0.1% delta). This indicates it performs on par with these competitors, and the measured FPS results confirm that the CPU is not the limiting factor in Downfall at 1080p.

At 4K, the CPU role diminishes further. The 4K Low result of 72 FPS is only 44% of the 1080p Low result, and the 4K Ultra result of 30 FPS is less than half of the 1080p Ultra result. This scaling shows that the GPU is the dominant bottleneck at higher resolutions, and the CPU’s performance has little impact on the final frame rate. The processor’s 65 W TDP and 7 nm process node also suggest it runs efficiently, which is beneficial for sustained gaming sessions.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution. For 1080p, the data shows that Medium settings at 133 FPS average (with a min of 113 and max of 153) provide an excellent balance between visual quality and performance. The High preset at 109 FPS is also viable, but the 24 FPS difference between Medium and High may not justify the visual upgrade for all users. The Ultra preset at 68 FPS is still playable, but the drop from High to Ultra is significant (41 FPS), making it less appealing unless visual fidelity is the absolute priority.

For 1440p, the Medium settings at 95 FPS average (with a min of 81 and max of 110) are the sweet spot. This provides a smooth experience well above the 60 FPS threshold, and the measured minimum of 81 FPS indicates that even the most demanding scenes stay fluid. The High preset at 78 FPS is also acceptable, but the 17 FPS drop from Medium to High may be noticeable in fast-paced moments. The Low preset at 116 FPS is unnecessarily high for most displays, and the Ultra preset at 49 FPS falls below the 60 FPS target, making it less recommended.

For 4K, the data shows that Low settings at 72 FPS are the only preset that consistently exceeds 60 FPS. The Medium preset at 59 FPS is borderline, and the High preset at 49 FPS is playable but not ideal. The Ultra preset at 30 FPS is not recommended for any serious gaming session. For the best experience at 4K, Low settings are the clear choice, as they provide a 22% performance uplift over Medium (72 vs 59 FPS) while still offering a playable frame rate. If visual quality is more important than frame rate, Medium is viable, but users should expect occasional drops to 50 FPS based on the measured minimum.

How This Combo Ranks

The AMD Ryzen 5 5600G and Intel Arc B570 combination ranks 2343 out of 2928 tested combos in Downfall. This places it in the 80th percentile of all tested configurations, meaning roughly 80% of other combos perform better. This ranking is somewhat surprising given the strong 1080p results, but it suggests that the system’s performance at higher resolutions drags down its overall standing. The combo’s rank is likely influenced by the GPU’s limitations at 4K, as well as the fact that many competing setups may feature more powerful graphics cards.

The GPU’s percentile ranking of 65 (vs all GPUs) and the CPU’s percentile ranking of 74 (vs all CPUs) provide context for the combo’s overall position. The GPU is a mid-range performer, while the CPU is slightly above average. The combo’s rank of 2343 indicates that while this system is capable of delivering solid performance in Downfall, it is not a top-tier configuration. The measured FPS data supports this: at 1080p, the system outperforms what its ranking might suggest, but at 4K, the performance falls short of what more powerful GPUs would achieve.

The Intel Arc B570’s nearest rivals include the NVIDIA GeForce RTX 3070 Mobile (0.1% delta), the Intel Arc A750 (-0.1% delta), and the AMD Radeon R9 M390X (0.4% delta). These comparisons show that the B570 is very closely matched with these GPUs in synthetic benchmarks, but the measured FPS in Downfall indicates that real-world performance can vary. The RTX 3070 Mobile being a laptop GPU is notable, as it suggests the B570 competes with mobile-class hardware despite being a desktop card.

FAQ

*Q: What is the best resolution for this combo in Downfall?*

A: The data shows 1080p provides the highest frame rates, with 163 FPS at Low, 133 FPS at Medium, and 109 FPS at High. 1440p is also viable with Medium settings at 95 FPS, but 4K only reaches 72 FPS at Low settings.

*Q: Can this system run Downfall at 4K with playable frame rates?*

A: The measured results show that only Low settings at 4K achieve an average of 72 FPS. Medium settings average 59 FPS, and High settings average 49 FPS, while Ultra averages 30 FPS.

Q: How does the CPU affect performance at 1080p versus 4K?

A: At 1080p, the CPU has more influence, as shown by the 163 FPS Low result, indicating the CPU can drive high frame rates. At 4K, the GPU becomes the primary bottleneck, with the CPU having minimal impact on the final FPS.

Q: What is the difference in performance between Medium and High settings at 1440p?

A: The data shows Medium settings average 95 FPS, while High settings average 78 FPS, a difference of 17 FPS. The Medium preset also has a measured minimum of 81 FPS, compared to no minimum data for High.

Q: Is the Intel Arc B570 a better performer than the Intel Arc A750?

A: According to the GPU benchmark scores, the B570 has an average score of 20556, while the A750 has a score of 20582, a delta of -0.1%. This indicates they perform nearly identically in synthetic benchmarks.

Q: What are the CPU’s single-threaded capabilities based on benchmark scores?

A: The Ryzen 5 5600G has a Cinebench R23 single-core score of 1409 and a Geekbench single-core score of 1801, indicating solid single-threaded performance for game logic.

Measured FPS Breakdown

The following is the complete set of measured FPS data for Downfall with the AMD Ryzen 5 5600G and Intel Arc B570:

3840x2160 (4K):

• High: 49 FPS average
• Low: 72 FPS average
• Medium: 59 FPS average, with a minimum of 50 FPS and maximum of 68 FPS
• Ultra: 30 FPS average

2560x1440 (1440p):

• High: 78 FPS average
• Low: 116 FPS average
• Medium: 95 FPS average, with a minimum of 81 FPS and maximum of 110 FPS
• Ultra: 49 FPS average

1920x1080 (1080p):

• High: 109 FPS average
• Low: 163 FPS average
• Medium: 133 FPS average, with a minimum of 113 FPS and maximum of 153 FPS
• Ultra: 68 FPS average

This data shows a consistent pattern across all resolutions: Low settings provide the highest frame rates, followed by Medium, High, and Ultra in descending order. The Medium preset is the only one with complete minimum and maximum data, indicating it was tested more thoroughly. The 1080p Low result of 163 FPS is the highest measured frame rate across all configurations, while the 4K Ultra result of 30 FPS is the lowest.

GPU Role

The Intel Arc B570 is the primary driver of performance in Downfall, especially at higher resolutions. The GPU features 2304 shading units, 144 texture mapping units, and 80 render output units, with 18 ray tracing cores. It has a base and boost clock of 2500 MHz, and its memory subsystem consists of 10 GB of GDDR6 memory on a 160-bit bus, providing a bandwidth of 380.0 GB/s. This memory configuration is sufficient for 1080p and 1440p gaming, but the 4K results suggest that the bandwidth and memory capacity become limiting factors.

The GPU’s FP32 performance of 11.52 TFLOPS and texture rate of 360.0 GTexel/s indicate a mid-range card that can handle modern games at moderate settings. In Downfall, the measured FPS data shows that the GPU’s performance scales inversely with settings, which is expected. However, the dramatic drop from Medium to High settings at each resolution (e.g., 133 to 109 FPS at 1080p) suggests that the High preset introduces significant additional GPU workload, likely from increased shadow quality or post-processing effects.

The GPU’s memory bandwidth of 380.0 GB/s is a critical factor at 4K. The data shows that 4K Low achieves 72 FPS, while 4K Medium drops to 59 FPS. This suggests that the memory bandwidth is being taxed more heavily at higher settings, as the larger textures and higher resolution consume more memory bandwidth. The 10 GB memory capacity is also a consideration, as 4K textures can approach this limit, but the data does not show any signs of memory capacity being a bottleneck at the tested settings.

The Intel Arc B570’s benchmark scores place it at the 65th percentile of all GPUs, with an average score of 20556. Its nearest rivals (RTX 3070 Mobile, Arc A750, Quadro M4000M, R9 M390X) all score within 0.5% of each other, indicating a tight cluster of performance. In Downfall, the GPU’s role is clearly dominant at 4K, where the frame rates drop by roughly half compared to 1080p at the same settings. This confirms that the Arc B570 is the limiting component in this combo, and users seeking higher 4K performance would need a more powerful GPU with greater memory bandwidth and computing resources.