Downfall

Resolution Scaling

The measured FPS data for Downfall with the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5050 shows a clear pattern of performance degradation as resolution increases. At 1080p with Low settings, the combo delivers 201 FPS average. Moving to 1440p Low drops that to 144 FPS, a 28% reduction. At 4K Low, the average falls to 89 FPS, which is 56% below the 1080p Low result. This scaling behavior indicates that the GPU becomes progressively more stressed as pixel count rises, which is expected for a card in this performance class.

The High settings preset tells a similar story. At 1080p High, the average is 135 FPS. At 1440p High, it drops to 96 FPS, representing a 29% decrease. At 4K High, the average is 60 FPS, which is 56% lower than the 1080p High figure. The consistency of these percentage drops across Low and High settings suggests that the RTX 5050 is the primary limiting factor when moving to higher resolutions, rather than the Ryzen 5 5500 holding things back.

The Medium preset shows the same trend with slightly different magnitudes. At 1080p Medium, the average is 165 FPS. At 1440p Medium, it falls to 118 FPS, a 28% drop. At 4K Medium, the average is 73 FPS, which is 56% below the 1080p Medium score. The uniformity of these reductions across three different settings presets strongly indicates that resolution scaling is GPU-bound throughout.

Ultra settings present the steepest curve. At 1080p Ultra, the average is 84 FPS. At 1440p Ultra, it halves to 60 FPS. At 4K Ultra, the average plummets to 37 FPS, which is 56% lower than the 1080p Ultra result. It is notable that the percentage drop from 1080p to 4K remains consistent at roughly 56% regardless of the settings preset, which reinforces the conclusion that the RTX 5050's rendering throughput, not the CPU, dictates the scaling behavior.

The data shows that 4K is only playable at Low settings, where 89 FPS average is achievable. At Medium, 73 FPS is borderline acceptable for a horror title, though the 62 FPS minimum recorded at 4K Medium indicates potential stutter in demanding scenes. At High, 60 FPS average is technically playable but leaves no headroom for drops. At Ultra, 37 FPS is not suitable for smooth gameplay.

FAQ

Q: Can this combo run Downfall at 4K smoothly?

A: At 4K Low settings, the average FPS is 89, which is smooth. At 4K Medium, the average drops to 73 FPS with a 62 FPS minimum, which is playable but with occasional dips. At 4K High, the average is 60 FPS with no minimum recorded, leaving little margin. At 4K Ultra, the average falls to 37 FPS, which is not smooth.

Q: How does the RTX 5050 compare to its nearest GPU rivals in general benchmarks?

A: The RTX 5050 has an average benchmark score of 21035 and sits at the 66th percentile among all GPUs. Its nearest rival, the AMD Radeon RX Vega M GL, scores 21153, which is 0.6% higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, which is 1.6% higher.

Q: Is the Ryzen 5 5500 a bottleneck for the RTX 5050 in Downfall?

A: The resolution scaling data suggests the GPU is the limiting factor. From 1080p to 4K, FPS drops by roughly 56% across all settings presets, which is characteristic of GPU-bound performance. The Ryzen 5 5500's multi-threaded benchmark score of 16429 in Cinebench R23 indicates sufficient CPU headroom for this workload.

Q: What is the best settings preset for 1440p gameplay?

A: At 1440p Medium, the combo delivers 118 FPS average with a 100 FPS minimum, which is excellent. At 1440p High, the average is 96 FPS, which is still very playable. At 1440p Ultra, the average is 60 FPS, which is acceptable but with less headroom. The Medium preset offers the best balance of visual quality and performance at 1440p.

Q: How does this combo rank among all tested combinations for Downfall?

A: This combo ranks 1755 out of 2928 tested combinations, placing it in the 60th percentile of all combos tested for this game. This means roughly 40% of tested combos perform better, while 60% perform worse.

Q: What is the highest FPS achievable with this setup?

A: The highest recorded average is 201 FPS at 1080p with Low settings. At 1080p Medium, the average is 165 FPS. At 1080p High, it is 135 FPS. The maximum FPS recorded across all tests is 189 FPS, which occurs at 1080p Medium.

GPU Role

The NVIDIA GeForce RTX 5050 features 8 GB of GDDR6 memory on a 128-bit bus, providing 320.0 GB/s of bandwidth. The memory clock runs at 2500 MHz, which translates to 20 Gbps effective. The GPU has 2560 shading units, 80 texture mapping units, and 32 ROPs. It also includes 20 RT cores and 80 tensor cores, which are relevant for games that leverage ray tracing or DLSS features, though Downfall's measured results do not specify whether these features were enabled.

The base clock is 2317 MHz with a boost clock of 2572 MHz. The GPU is built on a 5 nm process at TSMC with 16,900 million transistors on a 149 mm² die. The pixel rate is 82.30 GPixel/s, and the texture rate is 205.8 GTexel/s. The FP32 performance is 13.17 TFLOPS, with FP16 also at 13.17 TFLOPS (1:1 ratio). These specifications place the card in the 66th percentile among all GPUs, with an average benchmark score of 21035.

The 8 GB VRAM capacity is sufficient for Downfall at the tested resolutions and settings, as evidenced by the measured FPS results. The game's demands at 4K Ultra, where the average drops to 37 FPS, appear to be limited by raw compute rather than memory capacity, since the card still produces playable results at 4K Medium with 73 FPS average. The memory bandwidth of 320.0 GB/s, while not exceptional, is adequate for this game's texture streaming requirements at 1080p and 1440p.

The RTX 5050's closest rival in benchmark scores is the AMD Radeon RX Vega M GL, which scores 21153, a mere 0.6% difference. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, which is 1.6% higher. These tight margins indicate that the RTX 5050 performs in a narrow band around its competition, and real-world game performance will vary by title.

The GPU's DirectX 12 Ultimate support (12_2) ensures compatibility with modern rendering techniques. The Vulkan 1.4 and OpenGL 4.6 support provide flexibility for different game engines. The PCIe 5.0 x8 bus interface is more than sufficient for this card's bandwidth needs, as the measured FPS data does not indicate any interface-related bottlenecks.

How This Combo Ranks

In Downfall specifically, the combination of the AMD Ryzen 5 5500 and NVIDIA GeForce RTX 5050 ranks 1755 out of 2928 tested combos. This places the combo in the 40th percentile from the top, meaning it outperforms roughly 60% of all tested configurations. The rank reflects the pairing's overall capability in this game, considering both CPU and GPU contributions.

The CPU itself, the Ryzen 5 5500, has an average benchmark score of 19593 and sits in the 73rd percentile among all CPUs. Its nearest rivals include the AMD Ryzen AI 5 430 with a score of 19617 (0.1% higher), the Intel Core i5-12500 with 19668 (0.4% higher), the Intel Core i7-10700F with 19499 (0.5% lower), and the Intel Core i5-11600KF with 19723 (0.7% higher). The Ryzen 5 5500's performance is tightly clustered with these rivals, with all deltas under 1%.

The GPU, the RTX 5050, has an average benchmark score of 21035 and sits in the 66th percentile among all GPUs. Its nearest rivals are all within 1.6% of its score. This suggests that the GPU is the more variable component in this combo, with a wider spread of potential performance depending on the specific game.

The combo rank of 1755 out of 2928 indicates that this pairing is solidly mid-pack for Downfall. It is not a top-tier configuration, but it is far from the bottom. The 1080p performance data supports this interpretation, with strong frame rates at all settings except Ultra. The 1440p data shows playable performance at Medium and High, with Ultra being borderline at exactly 60 FPS average. The 4K data shows that the combo is only viable at Low or Medium settings.

Given that the CPU ranks in the 73rd percentile and the GPU in the 66th percentile, the combo rank of 60th percentile in Downfall is slightly lower than either component's individual percentile. This suggests that Downfall is somewhat more demanding on the combination than average, or that the game's engine does not scale perfectly with this hardware pairing.

Measured FPS Breakdown

At 1920x1080, the measured results show a clear hierarchy across settings. Low settings produce an average of 201 FPS. Medium settings produce 165 FPS average, with a minimum of 140 FPS and a maximum of 189 FPS. High settings produce 135 FPS average. Ultra settings produce 84 FPS average. The gap between Low and Ultra is 117 FPS, representing a 58% reduction in performance when maxing out the settings.

At 2560x1440, the same pattern holds with lower absolute numbers. Low settings produce 144 FPS average. Medium settings produce 118 FPS average, with a minimum of 100 FPS and a maximum of 135 FPS. High settings produce 96 FPS average. Ultra settings produce 60 FPS average. The gap between Low and Ultra at 1440p is 84 FPS, a 58% reduction, which mirrors the 1080p scaling.

At 3840x2160, the numbers become more constrained. Low settings produce 89 FPS average. Medium settings produce 73 FPS average, with a minimum of 62 FPS and a maximum of 84 FPS. High settings produce 60 FPS average. Ultra settings produce 37 FPS average. The gap between Low and Ultra at 4K is 52 FPS, a 58% reduction, which is consistent with the other resolutions.

The Medium settings preset is the only one that reports minimum and maximum FPS values across all three resolutions. At 1080p Medium, the range is 140 to 189 FPS, a spread of 49 FPS. At 1440p Medium, the range is 100 to 135 FPS, a spread of 35 FPS. At 4K Medium, the range is 62 to 84 FPS, a spread of 22 FPS. The narrowing range at higher resolutions indicates that the GPU is more consistently saturated, reducing the variance in frame times.

The percentage reduction from 1080p to 1440p is consistent across all settings. Low drops from 201 to 144 FPS (28% reduction). Medium drops from 165 to 118 FPS (28% reduction). High drops from 135 to 96 FPS (29% reduction). Ultra drops from 84 to 60 FPS (29% reduction). The consistency of this ~28% drop suggests a linear relationship between pixel count and rendering load.

The percentage reduction from 1440p to 4K is also consistent. Low drops from 144 to 89 FPS (38% reduction). Medium drops from 118 to 73 FPS (38% reduction). High drops from 96 to 60 FPS (38% reduction). Ultra drops from 60 to 37 FPS (38% reduction). This consistent 38% drop from 1440p to 4K, combined with the 28% drop from 1080p to 1440p, indicates that the GPU's rendering capacity scales predictably with resolution.

Settings Recommendations

For 1080p gameplay, the Medium preset at 165 FPS average is the best choice for most users. It provides a 140 FPS minimum, ensuring smooth play even in demanding scenes. The High preset at 135 FPS average is also excellent if visual fidelity is prioritized. The Ultra preset at 84 FPS average is playable but sacrifices significant frame rate for marginal visual gains. The Low preset at 201 FPS is only recommended for competitive play or very high refresh rate displays.

For 1440p gameplay, the Medium preset at 118 FPS average with a 100 FPS minimum is the optimal choice. It delivers smooth performance with good visual quality. The High preset at 96 FPS average is also very good and may be preferable for those who want better graphics, as the 96 FPS average still provides a responsive experience. The Ultra preset at exactly 60 FPS average is borderline; it is playable but leaves no headroom for frame drops in intense horror sequences. The Low preset at 144 FPS is viable for high refresh rate monitors but sacrifices visual immersion.

For 4K gameplay, the Low preset at 89 FPS average is the only setting that provides consistently smooth performance. The Medium preset at 73 FPS average with a 62 FPS minimum is acceptable for a slower-paced horror game, but the minimum frame rate indicates potential stutter. The High preset at 60 FPS average is technically playable but risky, as any drop below 60 FPS will be noticeable. The Ultra preset at 37 FPS average is not recommended for actual gameplay.

The data indicates that the best overall experience for Downfall with this combo is achieved at 1440p with the Medium preset, which balances visual quality with performance headroom. For users with 1080p displays, the High preset at 135 FPS offers the best visual fidelity without sacrificing smoothness. For 4K displays, the Low preset is the only reliable option, though users willing to tolerate occasional frame drops might find the Medium preset acceptable.

The measured results show that this combo performs best when the GPU is not pushed to its limits. The consistent FPS drops across settings presets suggest that the RTX 5050 has a clear performance ceiling, and the Ryzen 5 5500 is not the limiting factor. Users should prioritize frame rate stability in a horror game like Downfall, where smooth motion is critical for the atmosphere and gameplay feel.