Fivem

# Fivem Performance Analysis: AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5050

The AMD Ryzen 5 5500 paired with the NVIDIA GeForce RTX 5050 delivers a playable but resolution-sensitive experience in Fivem, with the combo ranking in the 60th percentile (1813rd of 3005 tested combinations). The data reveals a system that excels at 1080p, remains viable at 1440p, but struggles to maintain smooth frame rates at 4K, particularly at higher quality presets. The RTX 5050's 8 GB GDDR6 memory and the Ryzen 5 5500's six-core, twelve-thread configuration create a balanced pairing where the GPU becomes the primary bottleneck as resolution increases, while the CPU's single-thread performance keeps minimum frame rates respectable.

Resolution Scaling

The measured FPS data shows a dramatic performance drop as resolution increases from 1920x1080 to 3840x2160, with the magnitude of this drop varying significantly by quality preset. At Low settings, the average frame rate falls from 168 FPS at 1080p to 110 FPS at 1440p, then to 61 FPS at 4K — representing a 64% reduction from the lowest to highest resolution. This scaling pattern indicates that the RTX 5050's pixel throughput capabilities, including its 82.30 GPixel/s pixel rate and 320.0 GB/s memory bandwidth, become the limiting factor at higher resolutions. The 128-bit memory bus and 8 GB VRAM capacity are sufficient for 1080p and 1440p play, but the 4K resolution demands more memory bandwidth than the card can provide, causing the substantial frame rate decline.

The Medium settings row provides the only complete min/max FPS data across all resolutions, showing a consistent pattern: at 1080p the range is 112-152 FPS (average 132), at 1440p it narrows to 74-100 FPS (average 87), and at 4K it compresses further to 41-56 FPS (average 48). This narrowing of the frame time distribution at higher resolutions suggests that the GPU is becoming fully saturated, eliminating the headroom that exists at lower resolutions. The difference between 1080p and 4K Medium settings is 84 FPS, a 64% drop, while the difference between 1440p and 4K is 39 FPS, a 45% drop — indicating that the scaling penalty accelerates as resolution increases.

At Ultra settings, the story is more severe: 82 FPS at 1080p drops to 54 FPS at 1440p and finally to 30 FPS at 4K. The 4K Ultra result of 30 FPS is precisely at the threshold of smooth gameplay, and the 52 FPS difference between 1080p and 4K Ultra represents a 63% reduction. This pattern strongly suggests that the RTX 5050's 13.17 TFLOPS FP32 compute performance is insufficient for 4K Ultra workloads in Fivem, which is a multiplayer title that can have unpredictable scene complexity depending on player density and custom content. The resolution scaling data clearly indicates that the GPU is the limiting component at 1440p and above, while at 1080p the frame rates are high enough that the CPU's performance becomes more relevant.

FAQ

Q: What is the best resolution for smooth gameplay with this combo?

A: The data shows that 1920x1080 is the only resolution where all quality presets maintain average frame rates above 60 FPS. At 1440p, High and Ultra settings drop to 70 FPS and 54 FPS respectively, while at 4K only Low settings (61 FPS) average above 60 FPS.

Q: How does the Ryzen 5 5500's multi-threaded performance compare to its nearest rivals?

A: The Ryzen 5 5500's average benchmark score of 19593 places it within 0.7% of the Intel Core i5-11600KF (19723) and within 0.4% of the Intel Core i5-12500 (19668). It scores 0.5% higher than the Intel Core i7-10700F (19499) and 0.1% higher than the AMD Ryzen AI 5 430 (19617).

Q: What is the frame rate difference between Low and Ultra settings at 1080p?

A: At 1920x1080, Low settings produce an average of 168 FPS while Ultra settings produce 82 FPS. This 86 FPS difference represents a 51% reduction in frame rate when moving from the lowest to highest quality preset.

Q: Does this combo support 4K gaming?

A: It supports 4K resolution, but the measured data shows limited viability. Low settings achieve 61 FPS average, Medium achieves 48 FPS, High achieves 39 FPS, and Ultra achieves 30 FPS. Only Low settings provide a consistently smooth experience at 4K.

Q: How does the RTX 5050's GPU benchmark score compare to its closest competitors?

A: The RTX 5050's average benchmark score of 21035 places it 1.6% ahead of the AMD Radeon RX 5600 XT (20713) and 0.6% behind the AMD Radeon RX Vega M GL (21153). It trails the AMD Radeon HD 8970M (21237) by 1% and the NVIDIA RTX A4000 Mobile (21379) by 1.6%.

Q: What is the CPU's single-thread performance indicative of for Fivem?

A: The Ryzen 5 5500's single-thread score of 836 in 3dmark and 2319 in Cinebench R23, combined with its 3.60 GHz base and 4.20 GHz boost clocks, suggests adequate performance for Fivem's single-threaded workloads. The 3dmark 2-thread score of 1645 indicates the CPU can handle the dual-thread demands typical of online multiplayer game servers.

How This Combo Ranks

The AMD Ryzen 5 5500 + NVIDIA GeForce RTX 5050 combination ranks 1813th out of 3005 tested combos in Fivem, placing it in the 40th percentile of all configurations tested. This mid-pack ranking reflects a system that is capable but not exceptional for this specific game, which is notable because Fivem is a multiplayer modification that often stresses CPU performance due to server-side script processing and player interactions. The ranking suggests that while this combo delivers playable performance at most settings, there are 1192 other combinations that achieve better results in Fivem.

The combo's rank is somewhat surprising given that the RTX 5050's GPU benchmark score (21035) places it in the 66th percentile of all GPUs, while the Ryzen 5 5500's CPU benchmark score (19593) places it in the 73rd percentile. When the two components are combined in Fivem, the resulting performance rank is lower than either component's individual percentile, indicating that the pairing may not be optimally balanced for this particular game's demands. The CPU's nearest rivals include the Intel Core i5-12500 (19668, 0.4% higher score) and the Intel Core i5-11600KF (19723, 0.7% higher), both of which could potentially yield better Fivem performance when paired with the same GPU.

For context, the GPU's nearest rivals in terms of average benchmark score include the AMD Radeon RX 5600 XT (20713), which scores 1.6% lower, and the AMD Radeon RX Vega M GL (21153), which scores 0.6% higher. These small benchmark differences suggest that the RTX 5050 is closely matched with mid-range GPUs from previous generations, which helps explain its mid-pack ranking when paired with a mid-range CPU. The 1813th rank out of 3005 combos indicates that Fivem players using this hardware will experience performance that is typical for mid-range systems, with the potential for improvement through settings optimization.

Measured FPS Breakdown

At 1920x1080, the combo demonstrates its strongest performance across all settings. Low settings deliver an average of 168 FPS, representing the highest frame rate measured for this combination. Medium settings produce 132 FPS average with a range of 112-152 FPS, while High settings yield 106 FPS average. Ultra settings drop to 82 FPS average, which remains comfortably above the 60 FPS threshold for smooth gameplay. The 1080p results show that this resolution is well within the capabilities of both the CPU and GPU, with even the most demanding preset maintaining high frame rates.

Moving to 2560x1440, the performance degrades noticeably but remains playable. Low settings average 110 FPS, a 35% reduction from 1080p. Medium settings produce 87 FPS average with a range of 74-100 FPS, while High settings deliver 70 FPS average. Ultra settings drop to 54 FPS average, falling below the 60 FPS threshold and indicating that the GPU is becoming a limiting factor at this resolution with maximum quality settings. The 1440p results suggest that this resolution is viable for all settings except Ultra, where frame rates may be marginal for fast-paced multiplayer gameplay.

At 3840x2160, the performance limitations become apparent. Low settings achieve 61 FPS average, just above the 60 FPS threshold. Medium settings produce 48 FPS average with a range of 41-56 FPS, while High settings drop to 39 FPS average. Ultra settings yield only 30 FPS average, which is below the threshold for smooth gameplay and may result in noticeable stuttering during intense scenes. The 4K results demonstrate that this combo is only suitable for 4K gaming at the lowest quality preset, and even then, the frame rate is only marginally above 60 FPS.

The Medium settings rows provide the only complete min/max data across all three resolutions, offering insight into frame time consistency. At 1080p, the 40 FPS spread between minimum and maximum (112-152 FPS) indicates some variation but generally smooth performance. At 1440p, the spread narrows to 26 FPS (74-100 FPS), suggesting more consistent frame pacing. At 4K, the spread compresses to 15 FPS (41-56 FPS), which could indicate that the GPU is consistently operating at near-full capacity, reducing both peak and minimum frame rates.

CPU Role

The AMD Ryzen 5 5500's specifications provide context for its role in Fivem performance. With 6 cores and 12 threads based on the Zen 3 Cezanne architecture, the CPU offers solid multi-threading capabilities that are reflected in its 3dmark scores: 5386 for 16 threads, 5411 for max threads, and 4593 for 8 threads. These scores indicate that the CPU can handle multi-threaded workloads effectively, which is relevant for Fivem's server-side script processing and background tasks. The 3dmark single-thread score of 836 and 2-thread score of 1645 are more modest, suggesting that the CPU's per-core performance is adequate but not exceptional, which matters for Fivem's primary game thread.

The CPU's clock speeds of 3.60 GHz base and 4.20 GHz boost provide a 0.60 GHz boost headroom, allowing the processor to increase performance during demanding scenes. The 16 MB L3 cache and 51.2 GB/s memory bandwidth support the CPU's data throughput requirements, while the 65 W TDP indicates power efficiency that won't create thermal constraints in most systems. The Cinebench R23 scores of 16429 multi-core and 2319 single-core place the CPU in a competitive position relative to its nearest rivals, with the Intel Core i5-12500 scoring similarly (19668 average benchmark vs 19593 for the Ryzen 5 5500).

In Fivem specifically, the CPU's performance is likely to be most impactful at lower resolutions where the GPU has spare capacity. At 1080p Low settings, the 168 FPS average suggests that the CPU can feed the GPU with enough frames to utilize its full capabilities. However, at 4K Ultra settings, the 30 FPS average indicates that the GPU is the primary bottleneck, and the CPU's performance becomes less relevant. The 3dmark 4-thread score of 3151 and 8-thread score of 4593 show that the CPU scales well with thread count, but Fivem's engine may not fully utilize all 12 threads, making the single-thread and 2-thread scores (836 and 1645 respectively) more indicative of real-world performance in this game.

Settings Recommendations

For players seeking the best balance between visual quality and performance, the Medium preset at 1920x1080 is the recommended configuration based on the measured data. This setting combination delivers 132 FPS average with a range of 112-152 FPS, providing smooth gameplay with a 40 FPS buffer above the 60 FPS threshold. The minimum FPS of 112 ensures that even during intense scenes, the frame rate won't drop below smooth levels. Compared to High settings (106 FPS average), Medium offers a 25% performance improvement while sacrificing some visual fidelity, making it the optimal choice for competitive multiplayer play where response time matters.

At 2560x1440, the Medium preset remains the recommended choice, delivering 87 FPS average with a range of 74-100 FPS. This configuration maintains a 14 FPS buffer above the 60 FPS threshold, with the minimum FPS of 74 ensuring that brief dips won't cause noticeable stuttering. While High settings at 1440p (70 FPS average) are also playable, the Medium preset provides a more comfortable margin for the unpredictable scene complexity that Fivem can present in multiplayer lobbies with custom scripts and vehicles.

For 4K gaming, the Low preset is the only viable option, producing 61 FPS average. While this is just above the 60 FPS threshold, the lack of min/max data for this configuration means there is uncertainty about frame time consistency. Players who prioritize visual quality at 4K may find the Medium preset (48 FPS average, 41-56 FPS range) acceptable if they can tolerate occasional dips below 45 FPS, but the risk of stuttering in multiplayer scenarios is higher. The Low preset at 4K is recommended for players who value smoothness over visual fidelity, while the Medium preset at 1440p offers the best compromise between the two for most users.

The Ultra preset is not recommended at any resolution due to the significant performance cost relative to High settings. At 1080p, Ultra delivers 82 FPS compared to High's 106 FPS, a 23% reduction for what is typically a marginal visual improvement. At 1440p, Ultra drops to 54 FPS, below the smooth threshold, and at 4K it produces only 30 FPS, which is unplayable for fast-paced multiplayer. Players who are satisfied with High settings' visual quality will find that Medium offers the best performance-to-quality ratio, while those who want maximum visual fidelity should accept the frame rate trade-offs at their chosen resolution.