Doom

The AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 5060 delivers a high-refresh-rate experience in Doom, but the data reveals a clear performance hierarchy dependent on resolution and settings. At 1080p, the combination is overwhelmingly CPU-bound, producing frame rates as high as 244 FPS on Low settings, while at 4K, the GPU becomes the primary limiter, with averages dropping to as low as 54.2 FPS on Ultra. This pairing ranks in the 50th percentile of tested combos, indicating a balanced but not top-tier configuration for this title.

Resolution Scaling

The measured FPS data shows a predictable and steep decline as resolution increases, but the rate of that decline varies significantly with the graphics preset. From 1080p to 1440p, the average frame rate drops by approximately 34% to 36% across all settings. For instance, at High settings, performance falls from 177.5 FPS at 1080p to 112.8 FPS at 1440p, a 64.7 FPS decrease. This consistent percentage drop suggests that the scaling is primarily driven by the GPU’s rendering load, which increases with pixel count.

The transition from 1440p to 4K is even more punishing, with frame rates nearly halving. At Medium settings, the average FPS drops from 133.6 at 1440p to 74.4 at 4K, a 44% reduction. This sharper decline indicates that the RTX 5060’s 8 GB of GDDR7 memory and 128-bit memory bus are being saturated at 4K, causing a disproportionate performance hit compared to the 1440p to 1080p step.

The scaling pattern reveals that at 1080p, the CPU is the limiting component. The Ryzen 7 5800XT’s 8 cores and 16 threads are sufficient to feed the GPU at lower resolutions, allowing for frame rates above 200 FPS. However, as resolution increases, the GPU’s workload becomes the bottleneck, and the frame rate becomes more dependent on the graphics card’s raw compute power and memory bandwidth. The data shows that this system is best suited for 1440p gaming, where it maintains high frame rates without the severe performance degradation seen at 4K.

FAQ

Q: What is the maximum average frame rate achievable with this combo?

A: The highest recorded average frame rate is 244 FPS, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the average frame rate drops to 54.2 FPS, which is below the 60 FPS threshold for smooth gameplay.

Q: Is this system better suited for 1080p or 1440p gaming?

A: The data shows excellent performance at both resolutions, but the 1440p results are notably strong. For example, at High settings, the combo delivers 112.8 FPS at 2560x1440, suggesting it is well-balanced for high-refresh-rate 1440p monitors.

Q: What is the performance difference between Low and Ultra settings at 1440p?

A: At 2560x1440, the average frame rate ranges from 154.6 FPS on Low to 93.2 FPS on Ultra, a difference of 61.4 FPS or roughly 39% lower performance at the highest preset.

Q: How does the RTX 5060 compare to its direct rivals in synthetic benchmarks?

A: The GPU’s average benchmark score is 30109, which is nearly identical to the AMD Radeon RX 7700 XT (deltaPct of 0) and slightly ahead of the NVIDIA GeForce RTX 5070 Mobile (deltaPct of 0.6).

Q: What is the combo’s overall ranking among tested systems?

A: The combination ranks 832 out of 1681 tested combos, placing it in the middle of the pack for Doom performance.

GPU Role

The NVIDIA GeForce RTX 5060 is the decisive factor at higher resolutions. Its 8 GB of GDDR7 memory, clocked at 1750 MHz with a 128-bit bus, provides a bandwidth of 448.0 GB/s. This memory configuration is adequate for 1080p and 1440p, but the data suggests it becomes a limiting factor at 4K, where the average frame rate at Ultra settings falls to 54.2 FPS. The GPU’s boost clock of 2497 MHz and 3840 shading units deliver a FP32 compute throughput of 19.18 TFLOPS, which is sufficient for high frame rates at lower resolutions.

The synthetic benchmarks support the GPU’s mid-range positioning. The passmark G3D score of 20891 places it in the 73rd percentile of all GPUs, with an average benchmark score of 30109. The nearest rival, the AMD Radeon RX 7700 XT, has a nearly identical average score of 30097, indicating performance parity in general compute tasks. However, in Doom specifically, the RTX 5060’s performance at 4K Ultra (54.2 FPS) suggests that the game’s memory demands exceed what the 8 GB frame buffer can efficiently handle, leading to a significant drop from the 1440p result of 93.2 FPS at the same settings.

The GPU’s role is further clarified by the scaling data. At 1080p Low, the system achieves 244 FPS, which is likely near the CPU’s maximum output for this title. As the resolution increases, the GPU becomes the bottleneck, and the frame rate scales with the pixel count. This is a classic sign of a balanced mid-range system that excels at 1080p and 1440p but struggles to maintain high refresh rates at 4K.

How This Combo Ranks

In the global database of tested combinations, this pairing of the Ryzen 7 5800XT and RTX 5060 achieves a rank of 832 out of 1681 combos for Doom. This places it squarely in the middle of the performance distribution, which is consistent with the hardware’s specifications. The CPU’s percentile rank of 86 (vs all CPUs) is higher than the GPU’s percentile rank of 73 (vs all GPUs), suggesting that the processor is relatively stronger than the graphics card in this pairing.

The ranking implies that while this combo is capable of excellent frame rates at 1080p and good performance at 1440p, it is outclassed by many other configurations that feature higher-end GPUs or more balanced CPU-GPU pairings. The deltaPct values for the CPU’s nearest rivals are minimal (0.1 to -0.3), indicating that the Ryzen 7 5800XT is very closely matched with several other CPUs in synthetic tests. However, the combo’s mid-pack ranking in Doom suggests that the GPU is the limiting factor, as other combos with similar CPUs but stronger GPUs likely achieve higher frame rates.

CPU Role

The AMD Ryzen 7 5800XT, based on the Zen 3 architecture, provides a solid foundation for gaming. With 8 cores and 16 threads, it offers robust multi-threaded performance, as evidenced by its Cinebench R23 multi-core score of 23794 and Passmark multi-thread score of 27988. Its boost clock of 4.80 GHz ensures strong single-threaded performance, which is critical for Doom’s game logic and physics. The 32 MB of L3 cache helps reduce memory latency, and the dual-channel DDR4 memory support provides a bandwidth of 51.2 GB/s.

In Doom, the CPU’s role is most apparent at lower resolutions. At 1080p with Low settings, the system achieves 244 FPS, which is likely the maximum output the CPU can sustain. The 3dmark single-thread score of 959 and 2-thread score of 1879 indicate that the CPU’s single-core performance is adequate for high frame rates, but it does not match the top-tier processors. The CPU’s percentile rank of 86 (vs all CPUs) confirms that it outperforms the majority of processors, but it is not in the elite tier.

The data shows that the CPU is not the primary bottleneck at 1440p or 4K. The frame rate drops of 34-44% when moving from 1080p to 1440p and 1440p to 4K are consistent with GPU-bound scenarios. This indicates that the Ryzen 7 5800XT has enough headroom to feed the RTX 5060 at these resolutions, and the GPU’s rendering capacity is the limiting factor.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system’s capabilities across three resolutions and four settings presets. At 1920x1080, the average frame rates are 244 FPS (Low), 211.9 FPS (Medium), 177.5 FPS (High), and 146.2 FPS (Ultra). This shows a clear progression, with Ultra settings costing 40% of the performance compared to Low.

At 2560x1440, the averages are 154.6 FPS (Low), 133.6 FPS (Medium), 112.8 FPS (High), and 93.2 FPS (Ultra). The system maintains playable frame rates at all settings, with even Ultra settings exceeding 90 FPS, making this the sweet spot for high-refresh-rate gaming. The difference between Low and Ultra at 1440p is 61.4 FPS, which is a substantial but manageable trade-off for visual quality.

At 3840x2160, the averages drop significantly: 83.8 FPS (Low), 74.4 FPS (Medium), 62 FPS (High), and 54.2 FPS (Ultra). Only the Low and Medium settings exceed 60 FPS, while High and Ultra fall below this threshold. This indicates that 4K gaming is only viable with reduced settings, and the GPU’s memory bandwidth is a clear constraint at this resolution.

Settings Recommendations

For the best balance of visual fidelity and performance, the data supports using High settings at 1440p. This preset delivers 112.8 FPS, which is well above the 60 FPS threshold for smooth gameplay and close to the 144 Hz refresh rate common on modern monitors. The jump from Medium to High at 1440p costs only 20.8 FPS (from 133.6 to 112.8), while providing a significant visual improvement, making it a worthwhile trade-off.

At 1080p, Ultra settings provide 146.2 FPS, which is still exceptionally high and allows for maximum visual quality without sacrificing smoothness. This is the recommended preset for users with 1080p displays, as the performance headroom is sufficient to absorb the higher settings’ demands. For 4K displays, the data suggests that Medium settings at 74.4 FPS is the highest playable preset, as High settings at 62 FPS are borderline and Ultra at 54.2 FPS falls below the 60 FPS target.

For competitive play where frame rate is paramount, the Low preset at 1080p offers 244 FPS, which is ideal for high-refresh-rate esports monitors. However, for a single-player experience like Doom, the visual enhancements at Medium or High settings are likely worth the performance cost, especially at 1440p where the system maintains over 100 FPS.