Fivem

Fivem is a demanding multiplayer title, and the benchmark results for the AMD Ryzen 7 5800XT paired with the NVIDIA GeForce RTX 5060 show a configuration that scales predictably with resolution. The data indicates a system where the graphics card becomes the primary bottleneck at higher resolutions, while the processor holds its own at lower settings. This analysis breaks down the measured performance, focusing on where the frame rates land and what they mean for the overall experience.

Resolution Scaling

The measured FPS data shows a clear and steep drop as resolution increases from 1920x1080 to 3840x2160. At the "High" preset, the average frame rate falls from 127.4 FPS at 1080p to 84.8 FPS at 1440p, and then drops significantly to 46.2 FPS at 4K. This represents a 33% performance loss from 1080p to 1440p and a further 45% loss from 1440p to 4K. This scaling pattern is a strong indicator that the RTX 5060 is the limiting factor at higher resolutions.

The trend is consistent across all settings. When moving from 1080p to 1440p, the "Low" preset sees a drop from 198.7 FPS to 128.6 FPS, a 35% reduction. From 1440p to 4K, the same preset falls from 128.6 FPS to 75.6 FPS, a 41% reduction. The "Ultra" preset shows a similar trajectory, dropping from 98.8 FPS at 1080p to 61.6 FPS at 1440p and finally to 34 FPS at 4K. The percentage drops are consistent, indicating that the game is scaling with pixel count as expected.

The data suggests that at 1080p, the CPU is able to feed the GPU sufficiently, allowing it to reach high frame rates. However, as the resolution increases, the GPU's workload grows exponentially, and the frame rate becomes constrained by its raw rendering power. The fact that the gap between "Low" and "Ultra" at 4K is 41.6 FPS (75.6 vs 34) versus a 99.9 FPS gap at 1080p (198.7 vs 98.8) further confirms that the GPU is the primary constraint at 4K; the settings have less impact because the GPU is already saturated with pixel work.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture and features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 448.0 GB/s. Its boost clock is listed at 2497 MHz. In these tests, the GPU's role is clearly dominant. At 4K resolution, even the "Low" preset only manages 75.6 FPS, which is a playable frame rate but far from the high refresh rates achievable at lower resolutions. The "Ultra" preset at 4K drops to 34 FPS, which is a poor experience.

The benchmark results indicate that the RTX 5060 is a capable 1080p and 1440p card for this game, but it struggles to maintain high performance at 4K. At 1080p, it delivers excellent results, with the "High" preset hitting 127.4 FPS and "Low" reaching 198.7 FPS. At 1440p, the "High" preset still provides a smooth 84.8 FPS. The data shows a GPU that is well-suited for high-refresh-rate gaming at 1080p and solid 60+ FPS gameplay at 1440p on higher settings.

The GPU's average benchmark score is 30109, placing it in the 73rd percentile of all GPUs. Its nearest rival, the AMD Radeon RX 7700 XT, has an average score of 30097, a delta of 0%. This indicates they are performance peers in synthetic tests. The RTX 5060's 8 GB of VRAM is a notable consideration, and in a multiplayer title like Fivem, the data shows that it is sufficient for the tested settings, but the performance drop at 4K suggests that the memory capacity and bandwidth are also contributing factors to the frame rate limits.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 part with 8 cores and 16 threads, capable of boosting up to 4.80 GHz. Its cache configuration includes a 32 MB L3 cache. In synthetic benchmarks, it scores 23794 in Cinebench R23 multi-core and 3359 in single-core. Its average benchmark score is 29774, which places it in the 86th percentile of all CPUs, just barely above the AMD Ryzen 7 PRO 5755GE (0.1% delta) and the AMD Ryzen AI 7 PRO 360 (0.3% delta).

In Fivem, the CPU's role is most apparent at 1080p, where the frame rates are high enough to expose any processor limitations. The jump from "Medium" to "Low" at 1080p is 42 FPS (156.7 to 198.7), which is a significant gain. This suggests that the CPU is capable of driving frame rates well above 200 FPS in less demanding scenes, but the overall performance is still a combination of both CPU and GPU workload. The 5800XT's strong multi-threaded performance, as evidenced by its Cinebench R23 score, is likely beneficial for handling the many entities and scripts common in a multiplayer environment.

However, the CPU is not the primary bottleneck in this configuration. As resolution increases, the frame rate drops consistently, which is a classic sign of GPU limitation. The CPU's performance is sufficient to keep up with the RTX 5060 at 1080p and 1440p, as the measured frame rates are high. Even at 4K, the CPU is not holding back the GPU, as the frame rates are heavily constrained by the GPU's pixel throughput. The 5800XT provides a solid foundation for this build, ensuring that the GPU is the limiting factor at higher resolutions.

How This Combo Ranks

The combination of the Ryzen 7 5800XT and RTX 5060 ranks 897 out of 1792 tested combos in Fivem. This places it in the middle of the pack, which is a reasonable result given that it pairs a strong mid-range CPU with a mid-range GPU. The rank suggests that while this is not a top-tier combination for this specific game, it is not a weak one either. The performance is balanced, with neither component being a significant drag on the other.

The 897th rank out of 1792 combos indicates that there are both faster and slower configurations. It suggests that in the broader context of all possible pairings, this combo offers a level of performance that is typical for its class. The data shows that the GPU is the limiting factor in this pairing, especially at higher resolutions. If the goal is to improve performance in Fivem, the data suggests that upgrading the GPU would yield the most significant gains, as the CPU appears to have sufficient headroom. The CPU’s own benchmark percentile (86th) is higher than the GPU’s (73rd), reinforcing that the graphics card is the more likely upgrade path for this game.

Settings Recommendations

Based on the measured FPS, the optimal settings depend heavily on the target resolution and desired frame rate. For 1080p, the "High" preset provides an excellent balance, delivering 127.4 FPS, which is well above the standard 60 FPS threshold and suitable for high refresh rate monitors. The "Ultra" preset is also viable at 98.8 FPS, offering enhanced visual quality without sacrificing smoothness. The "Low" preset at 198.7 FPS is unnecessary for most users, as the high frame rates are beyond the refresh rate of most displays.

At 1440p, the "High" preset is the best choice for a great experience, hitting 84.8 FPS. This is a solid frame rate for a multiplayer title. The "Medium" preset at 100.3 FPS is also a good option for those who prioritize higher frame rates over visual fidelity. "Ultra" at 61.6 FPS is playable and provides the highest visual quality, but it is close to the edge of what is considered a smooth experience. For 4K resolution, the data suggests that "Low" is the only viable preset, at 75.6 FPS. "Medium" drops to 58.5 FPS, and "High" and "Ultra" are not recommended for competitive play.

The "Ultra" preset at 4K produces only 34 FPS, which is not a playable experience for most users. The "High" preset at 4K is also not ideal at 46.2 FPS. Therefore, for a 4K display, using the "Low" preset is the only way to get a smooth experience, and even then, the frame rate is not high. For most users, the "High" preset at 1080p or 1440p offers the best balance of visual quality and performance.

Measured FPS Breakdown

The measured data provides a complete picture of performance across resolutions and settings. At 1920x1080, the average frame rates are: 198.7 FPS on Low, 156.7 FPS on Medium, 127.4 FPS on High, and 98.8 FPS on Ultra. This shows a clear and consistent scaling with visual quality, with a total range of 99.9 FPS between the lowest and highest settings.

At 2560x1440, the average frame rates are: 128.6 FPS on Low, 100.3 FPS on Medium, 84.8 FPS on High, and 61.6 FPS on Ultra. The range narrows to 67 FPS, showing that the GPU is becoming more of a limiting factor. The performance drop from 1080p to 1440p is significant, with the "Low" preset losing 70.1 FPS and the "High" preset losing 42.6 FPS.

At 3840x2160, the average frame rates are: 75.6 FPS on Low, 58.5 FPS on Medium, 46.2 FPS on High, and 34 FPS on Ultra. The range narrows further to 41.6 FPS. At this resolution, the GPU is heavily loaded, and the impact of settings is reduced. The data shows that the RTX 5060 is not a 4K card for this game, as even the "Low" preset fails to reach 100 FPS. The "Ultra" preset at 34 FPS is a clear indicator that this setting is not suitable for 4K. This breakdown confirms that the best experience is found at 1080p or 1440p, where the frame rates are high and the settings have a meaningful impact on performance.