Control
This combination provides smooth gameplay with an average of 81 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 48 | 54 | 76 |
| 1440p QHD | 62 | 71 | 80 | 113 |
| 1080p Full HD | 82 | 94 | 106 | 149 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Control with AMD Ryzen 5 5600G + NVIDIA GeForce RTX 5060, In-Depth Analysis
The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 5060 delivers a compelling 1080p and 1440p experience in Control, but the data reveals a clear performance ceiling at 4K. This combination ranks in the 55th percentile of tested combos for this game, placing it at position 1665 out of 3720. The measured frames per second across resolutions and settings show a system that is well-balanced at lower resolutions, yet becomes increasingly GPU-bound as pixel count rises, with the CPU's older architecture and PCIe Gen 3 interface playing a supporting role.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and tells a clear story about where the bottleneck lies. At High settings, the average frame rate falls from 94 FPS at 1920x1080 to 71 FPS at 2560x1440, a reduction of 23 FPS. Pushing further to 3840x2160, the average drops to 48 FPS, meaning the transition from 1080p to 4K costs 46 FPS, or roughly a 49% performance loss. This scaling pattern is typical of a scenario where the GPU is the limiting factor—the RTX 5060's 8 GB of GDDR7 memory and 128-bit bus are being saturated at higher resolutions.
Looking at the Low preset, the scaling is even more dramatic. At 1080p Low, the system achieves 149 FPS, which is the highest measured result across all settings and resolutions. At 1440p Low, it drops to 113 FPS, and at 4K Low, it falls to 76 FPS. The 4K Low result is actually higher than the 4K High result (76 vs 48 FPS), indicating that reducing graphical load significantly alleviates pressure on the GPU. Notably, the 1080p Low score of 149 FPS suggests that the CPU can push well beyond 100 FPS, but the GPU cannot sustain that at higher resolutions.
The data implies that the RTX 5060 is the primary constraint at 4K, as the FPS decreases nearly linearly with resolution. However, the gap between 1080p and 1440p (23 FPS at High) is smaller than the gap between 1440p and 4K (23 FPS at High), suggesting that the CPU still has headroom at 1440p but is fully utilized by 4K. The 5600G's 6 cores and 12 threads, with a boost clock of 4.40 GHz, appear sufficient for 1080p and 1440p, but the GPU's compute resources—19.18 TFLOPS FP32 and 299.6 GTexel/s texture rate—are stretched thin at 4K Ultra, where the average falls to 42 FPS.
FAQ
Q: What is the best resolution for this combo to maintain 60+ FPS?
A: The data shows that 1920x1080 and 2560x1440 both achieve 60+ FPS on High settings, with 94 FPS and 71 FPS respectively. At 4K, only the Low preset (76 FPS) exceeds 60 FPS, while Medium (54 FPS), High (48 FPS), and Ultra (42 FPS) all fall below that threshold.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 5 5600G has an average benchmark score of 21088, placing it at the 74th percentile of all CPUs. It is nearly identical to the Intel Core i3-1220P (21066, +0.1%), the Intel Core Ultra 7 256V (21112, -0.1%), and the AMD Ryzen 5 7530U (21133, -0.2%). The Intel Core Ultra 7 155U scores 21174, which is 0.4% higher.
Q: Is the RTX 5060's 8 GB VRAM sufficient for Control?
A: The measured results suggest yes at 1080p and 1440p, but 4K Ultra still runs at 42 FPS average. The GPU has 8 GB of GDDR7 memory with a 448.0 GB/s bandwidth, which is adequate for the game's demands, but the frame rate drops at 4K indicate that memory bandwidth and capacity are not the only limiting factors.
Q: What is the combo's rank among all tested configurations?
A: The rank is 1665 out of 3720 combos, which places it in the lower half of the top 45% of tested systems. This ranking reflects the balance of the CPU and GPU for this specific game.
Q: Which preset offers the best balance of performance and quality at 1440p?
A: Medium at 2560x1440 provides 80 FPS average with a minimum of 68 FPS and a maximum of 92 FPS)Skip. High at 1440p gives 71 FPS, which is playable but closer to the edge of 60 FPS. Medium appears to be the sweet spot for smooth gameplay.
Q: Does the CPU's integrated graphics affect game performance?
A: No, the Radeon Vega 7 integrated graphics are not used in this configuration. The system relies on the discrete RTX 5060, which has its own 8 GB of memory. The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support are the relevant factors.
GPU Role
The NVIDIA GeForce RTX 5060 is the workhorse of this combo, and its specifications directly explain the measured FPS. With a boost clock of 2497 MHz and a base clock of 2280 MHz, the GPU operates within a tight frequency range. Its 3840 shading units and 120 TMUs provide substantial throughput, evidenced by the 19.18 TFLOPS FP32 performance bond. The 48 ROPs and a pixel rate of 119.9 GPixel/s are responsible for final image output, and the data shows that at 4K Ultra, the GPU delivers 42 FPS average, which is below the 60 FPS target.
The 8 GB of GDDR7 memory on a 128-bit bus gives a bandwidth of 448.0 GB/s. This is a moderate figure, and the scaling from 1440p to 4K shows a 23 FPS drop at High settings (71 to 48 FPS), which suggests memory bandwidth is not the sole bottleneck but contributes to the overall pressure. The GPU's 30 RT cores and 120 tensor cores are present, but their impact on measured FPS is not directly isolated in this data.
Comparing to its nearest rivals, the RTX 5060's average benchmark score is 26331, placing it at the 72nd percentile of all GPUs. It is within 1.2% of the AMD Radeon RX 6750 XT (26011), and slightly behind the AMD Radeon 860M (26401, -0.3%) and NVIDIA GeForce MX550 (26421, -0.3%). This indicates that the 5060 is a mid-range performer, and its 4K results in Control reflect a GPU that is capable but not dominant at ultra-high resolutions.
How This Combo Ranks
At position 1665 out of 3720 combos, this system sits in the 55th percentile of tested configurations for Control. This rank is a holistic measure that accounts for both CPU and GPU performance in the game. The CPU's percentileVsAllCpus is 74, and the GPU's percentileVsAllGpus is 72, yet the combo rank is lower, indicating that the pairing is not optimal for this specific title. The Ryzen 5 5600G, while strong in synthetic benchmarks, has a PCIe Gen 3 interface (16 lanes from the CPU) that may limit data transfer to the RTX 5060, which supports PCIe 5.0 x8. This mismatch could explain why the combo rank is lower than the individual component percentiles.
The measured data shows that at 1080p High, the system achieves 94 FPS, which is solid, but not exceptional for a GPU of this class. The rank suggests that other combinations with more modern CPUs or higher-end GPUs achieve better performance. However, the 5600G's 6 cores and 12 threads, with a boost clock of 4.40 GHz, are adequate for this game, as evidenced by the 149 FPS at 1080p Low, which indicates the CPU can feed the GPU without being a bottleneck at lower resolutions.
Settings Recommendations
For a smooth experience, the data points to Medium as the best compromise at 1440p. At 2560x1440 Medium, the average FPS is 80, with a minimum of 68 and a maximum of 92. This provides a consistent frame rate above 60 FPS, which is ideal for action-adventure gameplay. High at 1440p offers 71 FPS average, but the lack of a minimum FPS figure in the data suggests it may be less stable. At 1080p, Medium also excels with 106 FPS average and a minimum of 90 FPS, making it the recommended preset for those prioritizing frame rate stability.
At 4K, the only playable option is Low, which delivers 76 FPS average. Medium at 4K drops to 54 FPS, and High further to 48 FPS, both of which are below 60 FPS. Ultra at 4K is the worst performer at 42 FPS. For users with a 4K display, reducing to Low is necessary to maintain playability, but this sacrifices visual fidelity. The data suggests that 1440p Medium is the optimal balance of visual quality and performance, as it stays above 60 FPS with a comfortable margin.
Measured FPS Breakdown
At 1920x1080, the full range of settings is playable. Low yields 149 FPS average, Medium 106 FPS (min 90, max 122), High 94 FPS, and Ultra 82 FPS. The scaling from Low to Ultra is a 67 FPS drop, indicating that the GPU has enough headroom at 1080p to handle all presets, though Ultra still maintains a high frame rate. The minimum FPS data for Medium (90) shows that even in demanding scenes, the system stays well above 60 FPS.
At 2560x1440, the numbers are 113 FPS for Low, 80 FPS for Medium (min 68, max 92), 71 FPS for High, and 62 FPS for Ultra. The Medium preset's minimum of 68 FPS is the only measured minimum that stays above 60, while High and Ultra are close to the threshold. The transition from Low to Ultra costs 51 FPS, which is a significant reduction as the GPU becomes more stressed.
At 3840x2160, the results are 76 FPS for Low, 54 FPS for Medium (min 46, max 62), 48 FPS for High, and 42 FPS for Ultra. The Medium preset shows a minimum of 46 FPS, which indicates noticeable stuttering in intense sequences. The gap between Low and Ultra is 34 FPS, but the absolute values are all below 60 FPS except for Low)Skip. This data confirms that 4K is only viable with the Low preset, and even then, the 76 FPS average is not as high as the 1080p Low result.
CPU Role
The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture (Cezanne codename), manufactured on a 7 nm process. Its base clock of 3.90 GHz and boost clock of 4.40 GHz provide sufficient single-thread performance, as reflected in its Cinebench R23 single-core score of 1409. The multi-core score of 10551 in Cinebench R23 shows that the CPU can handle multi-threaded workloads, but Control is not a heavily threaded game, so the 16 MB of L3 cache and dual-channel memory support are more relevant.
The CPU's memory bandwidth of 51.2 GB/s for DDR4 is modest compared to the GPU's 448.0 GB/s, but this is normal for a desktop processor. The PCIe Gen 3 interface (16 lanes) is a potential bottleneck, as the RTX 5060 uses PCIe 5.0 x8, which is backward compatible but may not achieve full bandwidth. This could explain why the CPU's benchmark scores are high (74th percentile) but the combo rank is lower—the CPU is not the limiting factor, but its older interface may constrain the GPU.
The 5600G's nearest rivals in synthetic benchmarks—Intel Core i3-1220P, Core Ultra 7 256V, Ryzen 5 7530U, and Core Ultra 7 155U—all score within 0.4% of each other, indicating that the CPU is competitive with modern mobile and low-power parts. However, the 5600G's 65W TDP and Socket AM4 platform are older, and the data shows that in Control, the CPU can deliver 149 FPS at 1080p Low, proving it is not a bottleneck at lower resolutions. The bottleneck shifts to the GPU at 4K, where the CPU's role diminishes, and the RTX 5060's 42 FPS at Ultra is the final arbiter of performance.
Hardware Specifications
AMD Ryzen 5 5600G
NVIDIA GeForce RTX 5060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600G + NVIDIA GeForce RTX 5060 in Control
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 76.0 |
| 3840x2160 | Medium | 54.0 |
| 3840x2160 | High | 48.0 |
| 3840x2160 | Ultra | 42.0 |
| 2560x1440 | Low | 113.0 |
| 2560x1440 | Medium | 80.0 |
| 2560x1440 | High | 71.0 |
| 2560x1440 | Ultra | 62.0 |
| 1920x1080 | Low | 149.0 |
| 1920x1080 | Medium | 106.0 |
| 1920x1080 | High | 94.0 |
| 1920x1080 | Ultra | 82.0 |
Control with Ryzen 5 5600G + Other GPUs
See how Control performs with the same CPU but different graphics cards.
Control with RTX 5060 + Other CPUs
See how Control performs with the same GPU but different processors.
Other Games with Ryzen 5 5600G + RTX 5060
Explore FPS benchmarks for other games using this same hardware combination.