Fivem

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 5060 produces a distinctive performance profile in Fivem, one that shifts decisively depending on resolution and quality preset. Across the twelve measured configurations, the combination demonstrates a clear pattern: CPU-bound at lower resolutions, GPU-bound at 4K, with the middle ground offering the most balanced experience. The data reveals a combo that ranks near the midpoint of tested systems, yet its behavior under different loads tells a more nuanced story about where its strengths and limitations lie.

How This Combo Ranks

The combo holds position 912 out of 1792 tested combinations in Fivem, placing it just above the median of the database. This rank reflects a pairing where neither component dominates the other in a way that maximizes frame rates across all scenarios. The RTX 5060 sits in the 73rd percentile among all GPUs, while the Ryzen 5 5600G lands in the 78th percentile among all CPUs — both are capable parts, but their combined rank suggests Fivem’s workload does not perfectly align with their respective strengths.

Benchmark scores contextualize this further. The CPU’s average benchmark score of 19983 places it within 0.2% of the Intel Core i7-11600H (19949) and 0.2% below the Intel Core i7-11800H and AMD EPYC 7713P (both 20024). The GPU’s average score of 30109 matches the AMD Radeon RX 7700 XT (30097) within 0% delta, while trailing the AMD Radeon RX 570 (30158) by 0.2%. These near-identical scores suggest the combo’s mid-pack rank stems not from weak individual performance, but from how Fivem utilizes these specific components together.

GPU Role

The RTX 5060 brings 8 GB of GDDR7 memory across a 128-bit bus, delivering 448.0 GB/s of bandwidth. Its base clock runs at 2280 MHz with a boost of 2497 MHz, while memory operates at 1750 MHz (28 Gbps effective). The GPU’s 3840 shading units, 120 TMUs, and 48 ROPs handle pixel throughput at 119.9 GPixel/s and texture rate at 299.6 GTexel/s.

In Fivem, the GPU’s role becomes most apparent at 4K resolution. At 3840x2160, raising settings from Low to Ultra drops average FPS from 72.3 to 37.8 — a span of 34.5 FPS that directly reflects GPU workload scaling. The 8 GB VRAM capacity appears sufficient for this game’s demands, as no configuration shows evidence of memory-related stalling in the measured data. The GPU’s 73rd percentile standing, combined with its near-parity to the RX 7700 XT in average score, indicates it delivers solid rasterization performance that Fivem can leverage, particularly at higher resolutions where the CPU’s influence wanes.

CPU Role

The Ryzen 5 5600G provides 6 cores and 12 threads based on Zen 3 architecture, running at a 3.90 GHz base clock and 4.40 GHz boost. Its 16 MB L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth position it as a competent mid-range desktop processor. The 65 W TDP and unlocked multiplier offer flexibility, though Fivem’s multiplayer nature often stresses single-thread performance more than raw core counts.

The CPU’s benchmark results show strong single-thread capability — a 3DMark single-thread score of 872 and Cinebench R23 single-core score of 2365 — alongside respectable multi-thread numbers like 16758 in Cinebench R23 multicore. Fivem’s engine appears to benefit from this single-thread strength at 1080p, where the CPU becomes the limiting factor. The 0.2% delta to the i7-11600H and 0.3% to the Threadripper PRO 5995WX in average score underscores that this processor holds its own against much more expensive parts in synthetic tests, yet the game’s real-world demands reveal a different hierarchy.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce 199.1 FPS average, Medium reaches 158.4, High drops to 123, and Ultra settles at 98.9. The gap between Low and Ultra — 100.2 FPS — is substantial, indicating that even at 1080p, settings scaling has a major impact.

Moving to 2560x1440, the numbers compress but remain playable. Low averages 128.8 FPS, Medium 104.4, High 82.4, and Ultra 61.7. The spread between Low and Ultra narrows to 67.1 FPS, showing the GPU begins to assert more influence as pixel count rises.

At 3840x2160, the profile shifts dramatically. Low still manages 72.3 FPS, but Medium falls to 55.6, High to 43.5, and Ultra to 37.8. The Low-to-Ultra delta here is 34.5 FPS, the smallest of any resolution, confirming that 4K workloads saturate the GPU before settings can fully differentiate. No min or max FPS values were recorded, so the data reflects only average performance.

Resolution Scaling

The FPS drop from 1080p to 4K reveals the bottleneck dynamics. At Low settings, the transition from 1920x1080 (199.1 FPS) to 2560x1440 (128.8) loses 70.3 FPS, and then to 3840x2160 (72.3) loses another 56.5 FPS — a total decline of 126.8 FPS, or roughly 63.7% of the 1080p value. At Ultra settings, the same path goes from 98.9 to 61.7 to 37.8, a total drop of 61.1 FPS, or about 61.8%.

The pattern indicates that at 1080p Low, the CPU likely caps performance — the 199.1 FPS figure sits far above what the GPU needs to sustain at that resolution and settings level. As resolution climbs, the GPU becomes progressively more engaged, and by 4K, the RTX 5060’s raw throughput defines the ceiling. The fact that Ultra at 4K (37.8 FPS) lands barely above half of Ultra at 1080p (98.9) suggests the GPU’s fill rate and memory bandwidth are the limiting factors at the highest pixel counts, not the CPU’s thread management.

Settings Recommendations

For 1080p users, High settings at 123 FPS offers the best balance of visual quality and smoothness, while Ultra at 98.9 FPS remains viable for those prioritizing image fidelity. Low at 199.1 FPS is excessive for most displays, but useful for competitive play where frame rate trumps appearance.

At 1440p, Medium at 104.4 FPS emerges as the sweet spot — it clears the 100 FPS threshold while maintaining reasonable detail. High at 82.4 FPS is acceptable for slower-paced play, but Ultra at 61.7 FPS dips below the 60 FPS comfort zone for many users. Low at 128.8 FPS remains an option for high-refresh monitors.

For 4K, the recommendations tighten. Low at 72.3 FPS is the only preset that reliably exceeds 60 FPS, making it the default choice for playable performance. Medium at 55.6 FPS is borderline, and High (43.5) and Ultra (37.8) drop into ranges where motion smoothness suffers. The data suggests that 4K users should favor Low settings unless they accept sub-60 FPS averages.

FAQ

Q: What is the combo’s rank among tested systems in Fivem?

A: It ranks 912th out of 1792 tested combos, placing it just above the midpoint of the database.

Q: How does the CPU compare to its nearest rivals in average benchmark score?

A: The Ryzen 5 5600G scores 19983, which is 0.2% higher than the Intel Core i7-11600H (19949) and 0.3% higher than the AMD Ryzen Threadripper PRO 5995WX (19928), while trailing the Intel Core i7-11800H and AMD EPYC 7713P (both 20024) by 0.2%.

Q: What is the fastest measured configuration in the dataset?

A: The 1920x1080 resolution with Low settings produces the highest average FPS at 199.1.

Q: Which 4K preset comes closest to maintaining 60 FPS?

A: Low settings at 3840x2160 averages 72.3 FPS, while Medium drops to 55.6 FPS, so only Low reliably exceeds the 60 FPS mark.

Q: How much does the GPU’s average score differ from the AMD Radeon RX 7700 XT?

A: The RTX 5060’s average benchmark score of 30109 matches the RX 7700 XT’s 30097 with a 0% deltaPct.

Q: What does the FPS pattern suggest about the limiting component at 1080p?

A: The 199.1 FPS at Low settings, contrasted with the GPU’s 4K ceiling, indicates the CPU caps performance at 1080p — the Ryzen 5 5600G’s single-thread speed dictates results there, while the GPU takes over as resolution increases.