Archeage

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 3070 delivers a highly playable Archeage experience across most settings, with the data indicating that the Medium preset offers the optimal balance of visual fidelity and performance. At 1920x1080, Medium produces an average of 153.6 FPS, which is only 18.7 FPS lower than the Low preset’s 172.3 FPS but provides significantly better graphical quality. Stepping up to High at this resolution drops the average to 106.2 FPS, still smooth, but the jump to Ultra causes a steep decline to 68.6 FPS, suggesting that the Ultra preset’s demands are disproportionate to its visual return. At 2560x1440, Medium maintains a strong 106.7 FPS average, while High delivers 72.9 FPS; both are viable, but Medium again shows the best efficiency. At 3840x2160, the situation changes: Medium falls to 59.6 FPS, and High dips to 38.7 FPS, while Low remains playable at 67 FPS. For the best experience per the measured rows, the Medium preset is the recommended choice for 1080p and 1440p, as it keeps frame rates well above 100 FPS without the extreme performance cost of Ultra. For 4K, users should consider Low to maintain a smooth 60+ FPS average, as Medium’s 59.6 FPS is borderline and High is marginal.

GPU Role

The NVIDIA GeForce RTX 3070, built on the Ampere architecture with an 8 nm process from Samsung, is the primary driver of Archeage’s visual output. Its memory configuration of 8 GB GDDR6 on a 256-bit bus provides a bandwidth of 448.0 GB/s, which is sufficient for the game’s texture-heavy environments at 1080p and 1440p, but the data shows a clear limitation at 4K. The GPU’s base clock of 1500 MHz and boost clock of 1725 MHz, combined with 5888 shading units and 184 texture mapping units, contribute to its raw compute power of 20.31 TFLOPS. This translates to a Passmark G3D score of 22214, placing the GPU in the 72nd percentile of all GPUs. The benchmark results show that the GPU is a strong performer at lower resolutions, but its 8 GB VRAM capacity appears to be a bottleneck at 3840x2160 with High and Ultra settings, where average frame rates drop to 38.7 and 24.7 FPS respectively. The RTX 3070’s nearest rivals in the database include the AMD Radeon RX 6600 XT, which it leads by 0.9% in average score, and the NVIDIA GeForce GTX 980 Ti, which it leads by 1%; this indicates that the RTX 3070 sits in a competitive mid-to-high tier, but its 4K performance in Archeage is constrained by memory and fill rate limitations. The GPU’s pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are adequate for 1440p gaming, but the steep performance cliff between Medium and Ultra at 4K suggests that the GPU’s 96 ROPs are saturated by the game’s higher preset demands.

FAQ

Q: What is the best resolution and preset combination for the RTX 3070 in Archeage?

A: The data shows that 2560x1440 with Medium settings provides the best overall experience, yielding an average of 106.7 FPS. This resolution offers a good balance between visual clarity and performance, as 4K Medium drops to 59.6 FPS, which is less consistent.

Q: How does the RTX 3070 compare to its nearest GPU rivals in terms of average benchmark score?

A: The RTX 3070 has an average benchmark score of 28238. It leads the AMD Radeon RX 6600 XT by 0.9% and the NVIDIA GeForce GTX 980 Ti by 1%, while it trails the AMD FirePro S7150 by 0.6% and the AMD Radeon R9 M295X by 1.1%.

Q: Why does the Ultra preset perform so poorly at 4K resolution?

A: At 3840x2160 with Ultra settings, the average frame rate drops to 24.7 FPS, which is far below playable levels. This is likely due to the GPU’s 8 GB VRAM and 96 ROPs being insufficient for the extreme texture and shading demands of the Ultra preset at 4K, as evidenced by the High preset also struggling at 38.7 FPS.

Q: Is the RTX 3070 capable of running Archeage at 1080p with high refresh rates?

A: Yes, the data indicates that at 1920x1080, the Medium preset achieves 153.6 FPS and the Low preset hits 172.3 FPS. Even the High preset maintains a 106.2 FPS average, which is well above standard 60 Hz and 144 Hz display refresh rates.

Q: What is the performance difference between Medium and High presets at 1440p?

A: At 2560x1440, the Medium preset averages 106.7 FPS, while the High preset averages 72.9 FPS. This represents a difference of 33.8 FPS, indicating that the High preset imposes a significant additional load on the GPU without a proportional visual upgrade in the measured data.

Q: How does the CPU’s performance factor into Archeage’s frame rates?

A: The Intel Core i5-13400F has a Passmark multithread score of 25032 and a single-thread score of 3634, which places it in the 82nd percentile of all CPUs. While Archeage is primarily GPU-bound at higher resolutions, the CPU’s strong single-thread performance helps maintain high frame rates at 1080p, where the GPU is less constrained.

How This Combo Ranks

The combination of the Intel Core i5-13400F and the NVIDIA GeForce RTX 3070 ranks 798th out of 1727 tested combos in Archeage, placing it in the upper-middle tier of all possible configurations. This rank reflects the balanced nature of the pairing: the CPU is a solid performer, but it is not a top-tier chip, and the GPU, while capable, is not a flagship model. The combo’s percentile of 46.2% (calculated from the rank) indicates that roughly half of all tested combos perform better, which is expected given the mid-range positioning of both components. The GPU’s average benchmark score of 28238 is its primary contributor to the combo’s standing, while the CPU’s average score of 25236 ensures that there is no significant bottleneck. In practical terms, this rank means that the combo is well-suited for 1080p and 1440p gaming, as evidenced by the measured FPS data, but it will not compete with high-end systems at 4K. The combo’s position relative to other tested configurations suggests that users seeking higher ranks would need to upgrade either the GPU to a model with more VRAM or the CPU to a higher-core-count part, though the current pairing demonstrates efficient utilization of resources in most scenarios.

CPU Role

The Intel Core i5-13400F, a Raptor Lake-S architecture processor on a 10 nm process, provides the computational foundation for this combo. With 10 cores and 16 threads, it delivers strong multi-threaded performance, as shown by its Cinebench R23 multi-core score of 21279 and Passmark multithread score of 25032. Its boost clock of 4.60 GHz and single-thread Passmark score of 3634 are crucial for Archeage, which relies heavily on single-core performance for game logic and NPC processing. The CPU’s 20 MB of shared L3 cache helps reduce memory latency, while its support for both DDR4 and DDR5 memory offers flexibility. In the benchmark data, the CPU’s average score of 25236 places it in the 82nd percentile of all CPUs, with its nearest rival being the Intel Core i7-13620H, which it trails by a negligible 0.1%. This indicates that the i5-13400F is a well-balanced processor that does not bottleneck the RTX 3070 in most scenarios. At 1080p with Low settings, the combo achieves 172.3 FPS, which suggests that the CPU can keep up with the GPU’s output at high frame rates. However, at 4K with Ultra settings, the frame rate drops to 24.7 FPS, highlighting that the GPU becomes the limiting factor at higher resolutions, while the CPU’s role remains consistent across all settings. The CPU’s TDP of 65 W and 16 PCIe Gen 5 lanes ensure it can support the GPU’s PCIe 4.0 x16 interface without bandwidth constraints, making it a reliable partner for the RTX 3070 in Archeage.